CLDBAR12 Slim Single Row Light Bar Instruction Manual
- June 3, 2024
- CLD
Table of Contents
CLDBAR12 Slim Single Row Light Bar Instruction Manual
WHAT’S INCLUDED (STRAIGHT BAR)
- 1 x LED Light Bar
- Side and Bottom Mounting Brackets &Hardware
WHAT’S INCLUDED (CURVED BAR)
- 1 x LED Light Bar
- Side Mounting Brackets & Hardware
FEATURES & SPECIFICATIONS
- Light Output: 3,220 – 14,230 Lumens
- LEDs: OSRAM P8
- Power: 60W – 300W@13.6V DC
- Voltage: 10 – 36V DC
- Optional Length: 12″, 20″, 30″, 40″ and 50″ for Straight Bars 20″, 30″, 40″ and 50″ for Curved Bars
- Beam Pattern: Spot/Flood Combo
Dimension
20″ Straight Light Bar (For Example)
20″ Curved Light Bar (For Example)
MOUNTING INSTALL INSTRUCTION
Side Mounts
Bottom Mounts (ONLY FOR STRAIGHTBAR)
INSTALL INSTRUCTION
For Two 12″ Light Bars
For One 12″, 20″, 30″, 40″ or 50″ Light Bar
- Determine the appropriate mounting locations to install the LED light bars, wiring harness and switch. Once all mounting locations are confirmed, connect the wires as shown above. Proper insulation at connections is required.
- Connect positive wire and negative wire properly. Press the switch to test if the lights are working properly.
- Adjust the light to the desired angle and then secure by tightening all mounting screws.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>