REAL-EL S-2070 2.0 Home Theater Speaker System User Manual
- June 3, 2024
- REAL-EL
Table of Contents
REAL-EL S-2070 2.0 Home Theater Speaker System
Congratulations on your purchase of the REAL-EL speaker system!
BUYER RECOMMENDATIONS
- Unpack the device carefully. Make sure there are no accessories left in the box. Check up the carried-out delivery; if the product functions incorrectly address the dealer at once.
- Check up the package contents and availability of the warranty card.
- Do not switch on the speaker system immediately after you bring it into a room from the environment with negative temperature! After unpacking, the speaker system should be kept in conditions of room temperature for at least 4 hours.
- Before installing and using the speaker system, read this Manual carefully and keep it for future reference.
PACKAGE CONTENTS
- Speaker active – 1 pc
- Speaker passive – 1 pc
- Remote control (RC) – 1 pc
- Signal cable – 1 pc
- Mounting feet – 1 pc
- User manual – 1 pc
- Warranty card – 1 pc
SAFETY PRECAUTIONS
- Ϝ Do not open Multimedia Speaker System (MSS) and do not perform repairs by yourself.
- Do not put foreign objects inside the holes of the MSS.
- Protect the MSS from high humidity, water and dust.
- Protect the MSS from heating: do not place it closer heat source. Do not expose it to direct sunlight.
- Do not use any chemical agents for cleaning. Clean it with dry soft cloth only.
- In case of MSS does not work properly, power cable must be disconnected. Please contact place of purchase or service center.
TECHNICAL DESCRIPTION
REAL-EL S-2070 Multimedia speaker System (MSS) Is designed to play music and sound games, movies, etc. The MSS enabling to connect to virtual to any audio source without using an additional power amplifier. The MSS has a built-in, Bluetooth module and audio files player USB flash.
Special features
- 3-Way Speaker system
- Stereo Bi-amping design for high quality sound
- Perfectly connection to TV
- High-quality speaker drivers
- Built-in Karaoke function
- Two microphone inputs for Karaoke
- Audio playback via Bluetooth
- Built-in player USB / SD and AUX input
- Full-function remote control
Control panels
- STBY: On/Off standby mode
- : previous track (in the Player and Bluetooth mode)
- VOL+: Volume increase button
- INPUT: selection of input signal /operating mode
- : next track (in the Player and Bluetooth mode)
- : Play/Pause
- VOL-:Volume decrease button
- USB: port for a USB flash device
- SD CARD: slot for SD/MMC cards
- MIC: mic input 1/4” (6.35 mm)
Remote control
- STBY: On/Off standby mode
- DISP: backlight brightness adjustment
- INPUT: selection of input signal/operating mode
- MIC VOL+/-: microphone volume control
- EQ: equalizer settings
- previous track/ scroll back in USB/SD/Bluetooth mode
- ECHO+/-: echo level adjustment
- TRE+/-: high-frequency level adjustment
- SW +/: subwoofer level adjustment
- 0-9: numeric pad for entering track number
- REPEAT: pressing once repeat the current track Press twice repeat all tracks in sequence
- SLEEP: setting the sleep timer
- MUTE: mute the Volume
- next track/ scroll forward in USB/SD/Bluetooth mode
- : play/ pause in USB /SD / Bluetooth mode
- VOL-/+: master volume adjustment
- RESET: reset settings
CONNECTION AND OPERATION
Connection
Install the mounting feet from the kit for better speaker stability. Connect
the passive speaker to the active speaker by connecting the speaker cable to
connector and connect the speaker system to a 230V/ 50Hz power supply using
the built-in power cord. In the case of a wired connection to a signal source,
first connect the signal source, then turn on the speaker system with the
power switch.
- OPTICAL INPUT
- COAXIAL INPUT
- ON/OFF: power switch
- AC INPUT: power supply cord
- AUDIO INPUT: 2 RCA for audio sources connection
- RIGHT OUTPUT: passive speaker connection jack
- AUX: 3.5 mm mini-jack for audio signal connecting
Bluetooth mode
- Switch the unit to Bluetooth mode using the Input button on the control panel or remote control, briefly pressing until bt appears. The device enters the search mode.
- On the signal source (phone, tablet, etc.), you need to select the search mode for Bluetooth devices. The screen will display the name of the REAL-EL S-2070 which you want to establish a connection with. If the Bluetooth version of the signal source is below 2.0, you must enter the password 0000.
Player Mode
- Insert a UsB flash drive into the corresponding slot, the audio track will be played automatically. In the playback mode, briefly press the ” ” or ” 4 ” button to select the desired tracks.
- Press the ” ” button to play or pause.
Note:
Ihe USB connector is for conecting USB flash memory stickS only. Do not use this connector to charge other devices this may cause the speaker system damage. It is recommended to use USB flash or memory cards smaller than 8 GB for faster information reading. It is recommended to use more than 512 MB for SD card. The “OFF /ON” Power button must be turned off if the system is not used for a long time.
KARAOKE mode
To start using, you need to connect a microphone to the jack, and adjust the volume. The karaoke module is activated automatically with sound sources. Use a dynamic microphone with a 1/4 (6.35 mm) plug as the karaoke microphone.
AUX mode
- Press the INPUT button on the front panel of the subwoofer or the INPUT button on the remote control to switch to the AUX mode. The display will show the AUX inscription.
SPECIFICATION
Notes:
- Technical specifications given in this table are supplemental information and cannot give occasion to claims.
- Technical specifications and package contents are subject to change without notice due to the improvement of REAL-EL production.
Manufacturer: ENEL GROUP OU, Harju maakond, Rae valid, Jüri alevik, Aruküla tee 55a, 75301, Estonia. ® Registered Trademark of ENEL GROUP OU. Estonia.
COPYRIGHT
© 2022. ENEL GROUP OU.
This Manual and the information contained in are copyrighted. All rights
reserved.
TRADEMARKS
All trademarks are the property of their legal holders.