REAL-EL S-2030 2.0 Home Theater Speaker System User Manual

June 9, 2024
REAL-EL

REAL-EL S-2030 2.0 Home Theater Speaker System

BUYER RECOMMENDATIONS

  • Unpack the device carefully. Make sure there are no accessories left in the box. Check up the device for damage; if the product was damaged during transportation, address the firm, which carried out the delivery; if the product functions incorrectly, address the dealer at once.
  • Check up the package contents and availability of the warranty card.
  • Do not switch on the speaker system immediately after you bring it into a room from environment with negative temperature! After unpacking, the speaker system should be kept in conditions of room temperature for at least 4 hours.
  • Before installing and using the speaker system, read this Manual carefully and keep it for future reference.

PACKAGE CONTENTS

  • Speaker active 1 pc
  • Speaker passive – 1 pc
  • Remote control (RC) – 1 pc
  • Signal cable – 1 pc
  • Mounting feet – 8 pcs
  • User manual – 1 pc
  • Warranty card- pc

SAFETY PRECAUTIONS

  • Do not open Multimedia Speaker System (MSS) and do not perform repairs by yourself.
  • Service and repairs should be performed by qualified specialists in an authorized service center only. The list of authorized service centers is available at www.real-el.com
  • Do not put foreign objects inside the holes of the MSS.
  • Protect the MSsfrom high humidity, water and dust.
  • Protect the Mss from heating: do not place it closer heat source. Do not expose it to direct sunlight.
  • Do not place any open flame sources on or close to MSS.
  • Do not use any chemical agents for cleaning. Clean it with dry soft cloth only.
  • In case of MSS does not work properly, power cable must be disconnected. Please contact place of purchase or service center.

TECHNICAL DESCRIPTION

REAL-EL S-2030 Multimedia Speaker System (MSS) is designed to play music and sound games, movies, etc. The MSS enabling to connect to virtual to any audio source without using an additional power amplifier. The MSS has a built-in, Bluetooth module and audio files player USB fiash.

Special features

  • 3-way speaker system
  • Designed for high quality sound
  • Perfectly for connecting to a TV
  • Optimized crossover
  • High quality speaker drivers
  • Built-in KARAOKE function
  • Two microphone inputs for karaoke
  • Equalizer adjustment
  • Audio playback via Bluetooth
  • Built-in USB player, SD CARD (MMC)
  • Full-featured remote contro

Operation Manual

REAL-EL-S-2030-2-0-Home-Theater-Speaker-System-fig
1

Control panels

  1. Power ON/OFF
  2. INPUT : selection of input signal / operating mode
  3. MENU: tone control
  4. VOL+: volume increase button
  5. VOL-: volume decrease button
  6. next track (in the Player and Bluetooth mode)
  7. previous track (in the Player and Bluetooth mode)
  8. Play/Pause
  9. USB: port for a USB flash device
  10. SD CARD: slot for SD/MMC cards
  11. MIC: mic input 1/4” (6.35 mm)REAL-EL-S-2030-2-0-Home-Theater-Speaker-System-fig 5

Remote control

  1. STBY: on/off standby mode
  2. DISP: backlight brightness adjustment
  3. INPUT: selection of input signal / operating mode
  4. MIC VOL+/-: microphone volume control
  5. EQ: equalizer setting
  6. : previous track / scroll back in USB / SD / Bluetooth mode
  7. ECHO +/-: echo level adjustment
  8. TRE +/-: high frequency level adjustment
  9. SW +/-: subwoofer level adjustment
  10. 0-9: numeric pad for entering track number
  11. REPEAT: apressing once – repeat the current track Press twice – repeat all tracks in sequence
  12. SLEEP: setting the sleep timer
  13. MUTE: mute the Volume
  14. : next track / scroll forward in USB / SD / Bluetooth mode
  15. : play / pause in USB / SD / Bluetooth mode
  16. VOL -/+: master volume adjustment
  17. RESET: reset settings

CONNECTION AND OPERATION Connection

Install the mounting feet from the kit for better speaker stability. Connect the passive speaker to the active speaker by connecting the speaker cable to connector 6) and connect the speaker system to a 230V / 50Hz power supply using the built-in power cord. In the case of a wired connection to a signal source, first connect the signal source, then turn on the speaker system with the power switchREAL-EL-S-2030-2-0-Home-Theater-Speaker-System-fig
8

  1. OPTICAL INPUT
  2. COAXIAL INPUT
  3. AC INPUT: power supply cord
  4. AUDIO INPUT: 2 RCA for audio sources connection
  5. RIGHT OUTPUT: passive speaker connection jack
  6. ON/OFF : power switch

Bluetooth mode
Switch the unit to Bluetooth mode using the Input button on the control panel or remote control, briefily pressing until bt appears. The device enters the search mode.On the signal source (phone, tablet, etc.), you need to select the search mode for Bluetooth devices. The screen will display the name of the REAL-EL S-2030 which you want to establish a connection with. If the Bluetooth version of the signal source is below 2.0, you must enter the password 0000.

Player Mode

  • Insert a UsB flash drive into the corresponding slot, the audio track will be played automatically. In the playback mode, briefly press the “ ” or ” ” button to select the desired tracks.
  • Press the ” ” button to play or pause.

Note:
The UsB connector is for connecting UsB fash memory sticks only. Do not use this connector to charge other devices this may cause the speaker system damage. It is recommended to use USB fiash or memory cards smaller than 8 GB for faster information reading. It is recommended to use more than 512 MB for SD card. The “OFF/ON” Power button must be turned off if the system is not used fora long time.

KARAOKE mode
To start using, you need to connect a microphone to the jack, adjust the volume. The karaoke module is activated automatically with sound sources. Use a dynamic microphone with a 1/4 ” (6.35 mm) plug as the karaoke microphone.

SPECIFICATION

Parameter Value
Output power (RMS) 70 (2 × 35) W
Frequency range 40-20000 Hz
Speaker diameter:
tweeter 2 x 0 38 mm (1.5″)
middle range 2 x 0101 mm (4″)
woofer 2 x 0 203 mm (8″)
Connection types Bluetooth / USB / SD/ RCA
Optical / Coaxial/ MIC 1/4” (6.35 mm)
Bluetooth EDR + V 5.0
Bluetooth operation distance up to 10 m
Voltage supply ~ 230/50 V/Hz
Case material wooden (MDF)
Dimensions of one speaker unit 140 x 610 x 342 mm
Weight 16.8 kg

Notes:

  • Technical specifications given in this table are supplemental information and cannot give occasion to claims.
  • Technical specifications and package contents are subject to change without notice due to the improvement of REAL-EL production.

Technical support: www.real-el.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals