BOSCH MUZ5FW1 Meat Mincer User Manual

: June 4, 2024
: Bosch

Table of Contents

MUZ5FW1 Meat Mincer
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MUZ5FW1 Meat Mincer

My Bosh
Register your new device on MyBosch now and
get free benefits: bosch-home.com/ welcome

Meat mincer

User manual

qr-code https://digitalguide.bsh-group.com?mat-no=8001179251

Scan the QR code or visit the website to open the Further Notices for Use. You can find additional information
about your appliance or accessory here.

Safety

Read this instruction manual carefully.
Observe the instructions for the base unit.

Only use the accessories:

with a kitchen machine from the same series MUM5.
With genuine parts and accessories.
For cutting up raw or cooked food, e.g. meat, fish and vegetables.
For additional applications described in these instructions.
▶ Do not reach into the filling shaft.
▶ Only use the pusher to push down ingredients.
▶ Never assemble the accessories on the base unit.
▶ Only attach and remove accessories once the drive has stopped
and the appliance has been unplugged.
▶ The accessories should only be used in the intended operating
position.

▶ Do not process food that contains hard
components, e.g. bones, gristle or
stones.
▶ Do not insert objects into the filling shaft
or housing, e.g. wooden spoons.
▶ Before use, check the filling shaft and
housing for foreign objects.

Components
→ Fig. 1
A Meat mincer attachment
B Juicer attachment1
C Perforated discs1
D Grater attachment1
E Viennese whirl attachment1

1 Housing
2 Worm gear with agitator paddle
3 Knife
4 Perforated disc, medium
1 Special accessory
5 Threaded ring
6 Seal
7 Filling tray
8 Pusher
9 Worm gear for juicer attachment
10 Strainer housing
11 Juicer housing
12 Perforated disc, fine
13 Perforated disc, coarse
14 Worm gear for grater attachment
15 Grater drum
16 Cover
17 Holder for shape plate
18 Shape plate
1 Special accessory

Special accessory

You can find an overview of the special accessories
and how to use them here.

Overload protection

10Printed on 100% recycled paper
Perforated discs
The fine and the coarse perforated disc are suitable for additional processing functions.
Juicer attachment
The juicer attachment is suitable for squeezing soft fruit and vegetables, e.g. berries, tomatoes, apples, pears, rose hips.

Notes

Do not press fruit whose pips are similar in diameter to the hole diameter in the strainer insert, e.g. raspberries.
Cook hard food before squeezing to make it soft enough, e.g. rose hips.

Viennese whirl attachment

The Viennese whirl attachment is suitable for shaping biscuit dough or short crust pastry.
Grater attachment
The grater attachment is suitable for grating hard foods, e.g. almonds, nuts, chocolate, hard cheese or dry bread rolls.
Note: Only process dry nuts and almonds in small quantities.

Overload protection

The overload protection system prevents the motor and other components from being damaged through being overloaded.
If the meat mincer is overloaded or blocked, the agitator paddle on the worm gear will break at the predetermined breaking point.
Note: Spare parts with a predetermined breaking point are not covered by our warranty obligations. A new agitator paddle is available from customer service under or-der number 00418076.

Replacing the agitator paddle

1. Remove the faulty agitator paddle.
2. Insert the new agitator paddle.

Controls

Preparing the base unit
Note: The food processor shown in the pictures may differ from your model in terms of shape and features.

1. Set up the base unit as described in the main operating instructions.
2. Press the release button and move the swivel arm down until it engages in the vertical position.
→ Fig. 2
a The swivel arm is fixed in position 3.
3. Rotate the base unit to the operating po-sition.
→ Fig. 3
Inserting the seal
▶ Insert the seal into the housing and press in firmly.
→ Fig. 4
The recesses must match up exactly.
Assembling the attachments
Note: To use the special accessory, you need the parts of the meat mincer, except for the knife and perforated disc.
Assembling the meat mincer
→ Fig. 5 – 8
Assembling the juicer attachment1
Follow the illustrated instructions.
→ Fig. 9 – 13
Assembling the Viennese whirlattachment1
Follow the illustrated instructions.
→ Fig. 14 – 17
Assembling the grater attachment1
Follow the illustrated instructions.
→ Fig. 18 – 21
Fitting the attachment
→ Fig. 22 – 27

Recommended speeds

Observe the recommended speeds for optimum results.
Note: Your model is equipped with a 4- or7-level rotary switch depending on the features of the appliance. The recommended speeds for the 4-level rotary switch are al-ways shown in brackets in these instructions for use.

Setting
Use
7 (4)
Meat mincer
7 (4)
Juicer attachment
4-5 (2-3)
Viennese whirl attachment
3-4 (2-3)
Shredding attachment

Processing food
→ Fig. 28 – 30

Processing food with the juicerattachment1
Note: When working with the juicer attachment, note the following special features.

Place two containers under the relevant openings.
Before starting processing, turn the set-ting screw anticlockwise and open.
→ Fig. 31
During processing use the setting screw to select the desired consistency of the fruit purée and pulp.

Removing the attachment
→ Fig. 32 – 33
Tip: Clean all parts immediately after useso that residues do not dry on.

Overview of cleaning
Clean the individual parts as indicated inthe table.
→ Fig. 34

1Special accessory

Printed on 100% recycled paper