ASUS ROG Ryujin II ARGB Series CPU Liquid Cooler User Guide

ROG Ryujin II ARGB Series CPU Liquid Cooler
User Guide

Package contents

NOTE: The Intel Mounting bracket comes pre-installed on the AIO Cooler.

Installing the AIO cooler

NOTE: The illustrations in this section are for reference only, but the installation steps remain the same.

A. Install the Intel backplate

B. Install the Intel standoff screws

C. Install the pump

A. Remove the Intel Mounting Bracket

B. Install the AMD Mounting Bracket

C. Remove the pre-installed heatsink mount then install the plastic collars and standoff screws

D. Install the pump

Installing the Radiator

Connect the 9-pin USB 2.0 cable

Connect the micro USB cable to the AIO Fan Controller

Connect the ARGB to MB Cable for ARGB Fan lighting

Install the AIO Fan Controller

Download control software

Please visit the product support page at https://rog.asus.com/ to download and install the control software.

Support and FAQ

Q: What should I do if a CPU Fan Error error message pops up?

– A: Enter BIOS, then go to Monitor and set CPU FAN Speed to [Ignore].

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>