Rasonic RCF-8YE Circulation Fan User Manual
- June 4, 2024
- Rasonic
Table of Contents
Rasonic RCF-8YE Circulation Fan
SAFETY PRECAUTIONS (Be sure to read carefully and follow these safety
directions)
- Be sure to observe the following safety precautions in order to avoid possible injury to yourself or others and damage to your belongings.
- The user must use qualified socket with safety certification, or it may cause fire.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction. Do not allow children to climb on the fan.
- Hold the main plug when disconnect from the power supply, never pull the supply cord.
- Make sure main plug is fully inserted into socket. Loose engagement of main plug and socket may cause electric shock or fire due to overheating of the main plug.
- Wipe off dust on the main plug and socket periodically. Accumulation of dust on main plug may cause poor insulation and may result in fire.
- Do not use the fan when the power cord or main plug is damaged. If the supply cord is damaged, it must be replaced by the Shun Hing Electric Service Centre Limited in order to avoid the hazard.
- If the power cord is damaged or the fan is malfunction, please take the fan to Shun Hing Electric Service Centre Limited for repairing, Do not disassemble, repair or replace with parts and accessories without authorities.
- Do not pinch, bend, or twist the power cord excessively. The core conductors may be exposed or broken which may cause electric shock, short circuit, fire and product damage.
- Do not contact with water. It may cause fire and electric shock.
- Do not cover the fan in order to avoid overheating.
- Please do not put any object on the fan body.
- Never touch the fan with wet hands to avoid electric shock.
- Do not insert fingers or conductive object into the front and back air outlets of the machine to avoid the risk of human injury, fire or electric shock.
- Avoid any shocks, frictions or concussions to the fan.
- Do not use the fan in the sunshine.
- Put the power line correctly in case trip over by the cord.
- Put the fan on the flat and stable ground when using the fan.
- Do not use the fan under the following situation: Near gaseous fuel cooker/ Place with full of inflammable gas/ Place exposed to rain or water pour/ Near insecticide/ Oil corrosive solvent/ High temperature/ High humidity/ Near chemistry, oil and dust area Please do not pour water into the machine or hang wet clothes over the machine so as to avoid current leakage and electric shock;
- Please do not put flammable materials and wet clothes covered on the air outlet so as to avoid risk of fire or electric shock. Please do not spray insecticide, solvent or flammable liquid to the fan as it may cause damage to the fan.
- Please shut down the machine before the user leave the machine so as to avoid accidents.
- Avoid continuously exposure of direct wind from the fan especially to infant and children.
- The power must be cut off and unplugged before cleaning or maintenance. Ensure that the fan is switched off from the supply main before removing guard/ cover. Please clean the machine by using a damp cloth (or a damp cloth with some mild detergent), do not use corrosive detergent or solvent and such similar cleaning products, do not pour water into the machine.
- Please do not put the air intake and outlet of the fan close to the wall or curtain, otherwise the air flow will be blocked and affect the fan performance.
- If it occurs problems of abnormal sound or uneven wind speed after using for some time, perhaps there is too much dust in the air intake grid and make the air flow blocked, the fan could get right by cleaning the fan with a plastic brush.
- Cut off the power if the unit is not used for a long period of time. Pull out the plug, pack the fan well to protect it away from dust and keep it in the dry, well-ventilated and clean place.
PARTS NAME
REMOTE CONTROL
Battery replacement
- Pull out the battery case from the main body of the remote control and pull out the battery holder from the gap.
- Insert into the coin lithium battery, keep the positive pole upwards (CR2032 3V).
- After inserting the battery, slide the battery box, then insert and fix the battery box.
Warning: Keep the coin battery out of the reach of young children to avoid accidentally swallowing it.
CLEANING AND MAINTENANCE
- Always unplug the unit before cleaning, maintenance or moving. Unplug the unit and wait until the fan stop running before cleaning.
- Clean the surface of fan with a soft damp cloth.
- After cleaning, please dried up the fan before use.
Additional A DEVICES
- While installing the unit make sure fan blade is inserted completely. If not the unit could not work properly.
- Do not immerse the power cord, plug and the whole unit into water or rinse under the tap.
- Do not use gasoline, benzene, thinner, poisonous or corrosive detergent to clean the unit to avoid damage of the appliance. Use a damp cloth to clean the surface of fan.
- When store, never wrap the power cord tightly around the appliance or put any pressure to the power cord so as to avoid power cord damage.
- Clean the fan every month.
- If the fan will not be used for a long time, store it in the cool, dry and safe place.
HOW TO USE
Place the fan on a stable and flat surface. Insert the plug into a 220V-240V~
50-60Hz electrical power supply outlet, you can hear II Bi, Bi II sound, LED
display show the room temperature (It is not accurate data and just for
reference only).
MODE
Press “MODE” button, choose Normal / Natural / Sleep mode. When choose the
Natural model or Sleep model, the indicator light will light up accordingly.
OSCILLATION
- Press “OSC” button, activate the horizontal oscillation of the fan automatically.
- Activate vertical oscillation of the fan by manually.
ON/OFF
Press “ON/OFF” button, to turn the unit on or off, applicant will be started
at speed 1.
SPEED
Press “SPEED” button, set your desirable fan speed (1- 4 speed), LED display
show the fan speed.
TIMER SETTING
Press “TIMER” button, activate the timer 1H/2H/3H/4H/5H/6H/7H/8H. The
indicator light will light up accordingly, LED display show the timer setting.
No timer setting if setting is OH.
ADDITIONAL FUNCTION
Indicator light dimming:
15 seconds after the latest operation, all indicator lights will dim.Press
any functional button, indicator lights resume 100% light up.
Auto Power Off Function:
Under standby mode and turn on the fan, the fan will switch off automatically
after 8 hours’ operation without timer setting. To turn off auto power off
function – Insert the plug into power supply outlet within 10s,press “ON/OFF”
button and “TIMER” button for 5 seconds.You will hear “BI” sound, “TIMER”
indicator light will be blinking.Timer setting function is available. Resume
auto power off function – Turn off the fan and unplug power supply outlet,
then turn on the fan again, it will resume auto power off function.
SPECIFICATION
SPECIAL AVOWAL
- The information above has been checked. Our company reserves the hermeneutic power to any printing errors or misunderstanding on the content.
- If there are technical improvements on the appliance, the operation manual will be updated without any prior notice. The product appearance and color are subject to the actual appliance.
- The e-copy of user manual can be sent by e-mail on requested, please call Shun Hing Electric Works & Engineering Co. Ltd. hotline at 2861 2767.
AFTER-SALES SERVICES
For any defect, in the judgment of technician from Shun Hing Electric Service
Centre Limited, caused under normal use, we are responsible for repairing or
replacing parts of the said electrical appliance free of charge within one
year guarantee period commencing from the date of purchase. Any defective part
which has been replaced shall become our property. Guarantee service does not
cover the repair or replacement of accessories, external cables or cabinet,
etc. Additional charges shall be levied if services are required. Please
present the official invoice and the guarantee certificate with the sales
point’s chop or the redemption center’s chop for free maintenance. For
enquiries, please call Shun Hing Electric Service Centre Limited hotline at
2406 5666. Free guarantee service will not be provided to the fan if: 1) it
has been explicitly or implicitly modified, tampered with, altered or repaired
in any way by persons other than technicians of the Company. Or 2) it has been
damaged through misuse, negligence, liquid ingress or corrosion, power
interruption, natural calamities or accident or external factors. Or 3) it is
not a fixed installation on land. Or 4) the normal operation of the fan is
affected by improper installation. Or 5) the domestic model of fan is used for
industrial or commercial purpose. Or 6) the change of location or ownership of
the fan and did not inform Shun Hing Electric Service Centre Limited.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>