blinds 2go SmartView Electric Roman Blinds Installation Guide
- June 3, 2024
- blinds 2go
Table of Contents
blinds 2go SmartView Electric Roman Blinds
Installing the battery pack
We recommend charging the battery pack before you begin to use the blind, to
ensure it starts with a full battery. Use the charger plug included – the LED
on the charger plug will turn green when the battery pack is fully charged.
blinds-2go-SmartView-Electric-Roman-Blinds-01
Blinds ordered as ‘recess fitting’
Use the ‘hook’ brackets from the fittings kit to hang the battery pack onto
the back of the blind’s headrail, as shown.
Blinds ordered as ‘exact fitting’
If there is not enough space behind the headrail to hang the battery pack,
then it can fixed to another surface using the ‘clip’ brackets provided. The
clip brackets can be either top-fixed or face-fixed.
Fitting the brackets
The brackets offer two methods of installation:
Top-Fixing
Use the single hole in the top of the bracket to fix to the lintel (the
‘ceiling’ of the recess).
Face-Fixing
Use two screws through the back plate to mount onto a facing surface (a wall
or window frame)
Note that the position of the outermost brackets should be at least 5cm away from the ends of the rail, with any other brackets evenly distributed across the width.
Fitting the blind
-
Situate the front lip of the headrail into the front of the bracket.
-
Push the back of the headrail upwards to lock it into the back of the bracket.
-
To release the blind from the brackets, push firmly against the blind’s headrail then, still pushing against it, twist the back of the headrail downwards.
Download the SmartView App
blinds-2go-SmartView-Electric-Roman-Blinds-07