blinds 2go Double Charcoal Roller Blinds Installation Guide
- June 3, 2024
- blinds 2go
Table of Contents
Installation Guide
Double Roller Blinds
Before you begin
The front blind should be the one highest and closest to you, so make sure that when marking out where to put your brackets you have one round section pointing toward you and the other pointing down.
Fitting the brackets
The brackets offer three methods of installation:
Where the brackets are screwed into the lintel (or ‘ceiling’ of the recess)| Where the brackets are screwed onto a facing surface (a wall or window frame)| Where the brackets are screwed into the side walls of the recess
Top Tip
Top-fixing or face-fixing are recommended for most installations, whereas side-fixing is only recommended if the width you gave us was taken right at the top of the recess.
Fitting the blind
Install the rear blind first. Begin by slotting the ‘pin’ end into the
circular hole in the bottom part of the bracket.
Lift the ‘control’ end and slot it up into the notches on its bracket, then
push down on it gently to ensure it’s fixed in securely.
Repeat the process for the front blind.
Child Safety
Cord Tensioner
The cord retaining device must be installed at the maximum distance possible
from the control mechanism to prevent looped cords from becoming slack.
Place the retaining device on the wall (one for each chain) and mark the
position of the screw hole(s) with a pencil.
Attach the retaining device to the wall using the fixings provided.