SAIER X8 3D Hologram LCD HD 720P Mini Projectors User Manual

SAIER X8 3D Hologram LCD HD 720P Mini Projectors

BEGINNING WORDS

• First of all, thank you for your support!
• You can fully understand the use and operation of this product by reading this manual.
• This hand-held projection equipment is small, portable, and powerful, which is specially designed for household, entertainment, business, and other application environments. It allows you to enjoy the fun of a large screen display anytime and anywhere, and you are welcome to share the fun and ideas of using it with us.
• If you have any questions about this product, welcome to contact our professional after-sales service personnel, and we will provide you with cordial service.

IMPORTANT SAFETY PRECAUTIONS

Important: To get the best viewing effect, it’s suggested that you use the product in a dark room.
Warming: Following safety instructions can sustain the product’s lifespan and prevent it from firing or electric shock, so please read them carefully and pay attention to all warnings.

• Do not install it in a place with poor ventilation.
• Do not install it in a hot or damp place.
• Do not block its ventilation holes (Intake or Exhaust).
• Do not install it in a dusty or smoky place.
• Do not install it near the temperature/smoke sensor since it might cause the sensor to fail to work.
• Do not install it in a position directly blown by air conditioning. Otherwise, it might be malfunctioned because of the water & vapor condensation or high temperature.

Note: To maintain the performance and reliability of the projector, please leave at least 30cm of space around the projector.

Note: The projector’s light is very bright, so please do not look at it directly or point its light to your eyes in case of causes visual damage.

IMPORTANT SAFETY NOTICE

• Do not install in an unventilated area.
• Do not install in high temperature and humidity.
• Do not settle the bottom in a soft place.
• Stay away from the dust.

PACKING LIST

Note: Please check whether the accessories are complete after opening the package. If it’s not complete, please contact customer service for a replacement.

PRODUCT INTRODUCTION

Projector Stand Installation Method: Align the four holes of the bracket with the bottom of the projector and tighten the screws to fix the bracket to the projector. If you want to adjust the tilt angle of the projector, you can use a screwdriver to adjust the tightness of the screws on the left and right sides.

REMOTE CONTROL

Virtual Mouse Function : Long press the button on the remote to activate the virtual mouse function; if you want to exit virtual mouse mode, long press the button again.

Notice: Due to App copyright issues, Apps like Netflix may require users to use a Mouse to fully navigate.

If you cannot scroll up/down via the remote control within some Apps, it’s recommended to connect a mouse to the projector to fully navigate.

Remote Control Using Cautions

• Be cautious when using the remote control. Do not drop it, trample on it, or spill any liquid into its body.
• Do not put the remote control near any heat source.
• Do not expose the remote control to sunlight.
• Do not put the remote control in a damp place.

INSTALLATION AND DEBUGGING

Projector Installation

• Method 1 : Put it horizontally
• Method 2: Hang it with a mount

Note: When the projector is hung on the ceiling or in a system of rear projection, please change the projection mode accordingly.

Projection Mode
Adjust the projection mode under Menu > MY APPS > Settings > Display > Projection Settings > Projection Mode per your needs.

Focus Adjustment
When the image is blurred, it’s recommended to manually press the F+/F- focus button on the remote to improve the clarity of the image. If you cannot obtain satisfactory clarity through adjustment, please move the projector forward or backward.

Keystone Correction
When trapezoidal distortion occurs, the user needs to adjust the electronic keystone correction under the following Settings: Menu > MY APPS > Settings > Display > Projection Settings > Keystone Correction.

Press the up/down/left/right key button on the remote to adjust the inclination of the projection screen per your needs.

Four Point Scaling

Press the OK button on the remote select the four corners, then press the up/down/left/right button on the remote to adjust the projection screen inclination per your needs.

Projection Size Adjustment

Press the left/right button on the remote to adjust the projection size per your needs.

Turn Off Safely
Press the switch button on the operation panel or remote control, and turn off the device according to the system prompts.

ANDROID DESK

Overview
Press the Power on the button, it will enter the home page after the boot screen appears for a few seconds.

App Playing
Once connected to a wireless network, you can access online services, enjoy movies, music, and pictures, and browse the internet through the installed apps. Apart from the apps installed, you can also install any other apps either from the App Store or from Google Play Store.

1. Press the “Home” button to access the home menu.
2. Select “SETTINGS” – “Network” to complete the network connection.
3. Select ”My Apps” – “>” – “Netflix/YouTube/Prime Video” etc to start your APP playing.

Note: Apart from the apps installed, you can also install any other apps either from the App Store or Google Play Store. For the apps that you cannot find in the App Store or Google Play Store, you can download the APK file on the website and install it on a USB flash drive.

• App Manager Select “Menu-Settings-Apps” to manage your installed Apps.
• App Uninstall Select an App in My Apps and long press “≡” on the remote control, then you can select [Uninstall] to remove the App.

Wireless Mirroring Function

Android Device Mirroring
Please make sure your Android mobile/tablet supports Screen-sharing before you start using wireless projection on this projector.

1. Please connect your Android device to the same network as the projector.
2. Turn on the projector press the Menu/Home button on the remote control, and select “My APP – >[More] – HappyCast- iPhone” as the input source.
3. Enter into phone settings and Activate the Screen-Sharing function on your Android device, click it, and find the device to connect HappyCast-XX.

Note: For different phone brands, the names of “screen-sharing” are different.

IOS Device Mirroring

1. Please connect your IOS device to the same network as the projector.
2. Turn on the projector press the Menu/Home button on the remote control, and select “My APP – >[More] – HappyCast- iPhone” as the input source.
3. Activate the Screen-Mirroring function on your IOS device and search for the projector, click it, nd find the device to connect HappyCast-XX.

Note: if there is no sound when screen mirroring on your Macbook, please go to the Macbook sound settings and choose “HappyCastXX” as the output sound.

DLNA – APP Airplay

1. Please connect your mobile/tablet device to the same network as the projector.
2. Turn on the projector press the Menu/Home button on the remote control, and select “My APP – >[More] – HappyCast- Video” as the input source.

Cast Screen Guide

1. Make sure your device and projector are on the same WLAN.
2. Choose whatever video you like on apps with cast screen capability.
3. Click the TV Button on your device, and select this projector [HappyCast-XX].

Notice: Due to copyright issues, Videos like Netflix, Prime Video, Disney, and Hulu do not support screen mirroring on smartphones directly. You can watch those videos directly with the installed apps of the projector or connect them to your laptop via an HDMI connection.

Macbook Screen Mirroring

1. Click the Screen Mirroring icon on the top of your MacBook taskbar.
2. Click Mirror or extend to: [HappyCastXX] and choose Mirror Built-in Retina Display.
3. Click [HappyCastXX] again to exit Screen Mirroring.

HDMI Connection
HDMI Compatible Devices: Laptop, TV Stick, PS4, XBOX, DVD Player, etc. HDMI Connection Methods:

• Method ①: Press the “Source” button on the remote control to select HDMI as the input source.
• Method ②: Connect the projector to your laptop or Fire TV stick, or DVD player via HDMI connection, then select “My APP – >[More] -HDMI IN” as the input source.

Sound Settings for HDMI C connections.

• Turn off Dolby Audio on your device (such as TV stick/PS4/PS5).
• If there is no sound with the lu-ray Disc Player, please change the sound model to PCM on your DVD player.
• If there is no sound with the Cable Box, change the sound model to PCM in your Cable Box.
• If there is no sound with a USB stick/TF card, please download the video with Dolby(AC3).
• If there is no sound with the Laptop/Macbook via HDMI connection, please change the lalaptop’sound output to HDMI under Setting – sound -select HDMI as the sound output device.

USB Connection

Connect the USB flash driver to the projector and select “My APP – >[More] -Explorer” as the input source, then select USB flash driver to select (videos, pictures, music, and all files) then press OK to play, press the return key to exit.

Local Player support format is as follows:

• Video Mp4,AVI,mov,mkv,flv,mpg,ts,3gp,VOB
• Audio AAC,amr,FLAC,m4a,mp2,mpga,ogg,Wav
• Picture JPEG, BMP, PNG, JPG

PROJECTOR SETTINGS

Network Settings

1. Go to the main Menu of the projector and choose [S ettings].
2. Select [Network Settings] and Click [ON] to activate the WiFi function.
3. Find your home WiFi network name and input the password, click [NE XT] to connect.
4. Then press the return key to exit the WLAN interface.

Note: Firstly, please try to turn on the hotspot of your smartphone and check if the projector can connect to your smartphone hotspot. If not, please reset the projector by Settings > Reset & Upgrade > Reset Data and reconnect to your WiFi again.

Bluetooth Settings
Turn on the projector and press the Menu/Home button on the remote control, select “Settings – Device – Network Settings”, find “Bluetooth” and press OK to turn on Bluetooth, choose the device to be paired, and then select the return key to exit.

Notice: It’s NOT support to connect with smartphones via Bluetooth to realize screen sync.

Projection Settings

1. Settings > Projection Mode: Front and Upside down.
2. Settings > Keystone Correction: Electric Keystone to adjust four corners.
3. Settings > Four Point Scaling: Vertical Correction and Horizontal Correction.
4. Settings > Whole Scaling→Zoom in/Out: 100% – 40%.

BASIC PROJECTOR SETTINGS

Time & Date
Settings > Date and Time: Auto internet date and time or set the date and Timezone, Use 24-hour Format.

Sound Settings
Adjust the volume and press voice according to your needs.

Language
Settings→Language Settings: Press OK to enter the language option to choose a language.

Device Information
Check the information on the Model, Android System Version, Kernel Version, Build Number, RAM, and ROM.

Apps
Check all of your apps, and force stop/uninstall/clear cache per your needs.

Reset & Upgrade
Settings→Factory Reset→Reset Data

Settings > System Update
Online updates or local updates, and check the update record of the projector. To make sure the normal use of the projector, we suggest that customers activate the “automatic”.

SPECIFICATIONS

*Specifications and designs are subject to change without notice.

FCC Warning

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>