Danfoss 35VQ, 36VQ Vane Type Single Pumps User Manual
- June 3, 2024
- Danfoss
Table of Contents
35VQ, 36VQ Vane Type Single Pumps
User Manual
Vane Type Single Pump
35VQ*A-86 – 20(L)
36VQ**A-86 – 20(L)
AX432876936851en-000101
35VQ, 36VQ Vane Type Single Pumps
- ASSEMBLE SEAL WITH SPRING LOADED SEALING MEMBER TOWARD BEARING.
- ASSEMBLE SEAL FLUSH WITH PILOT FACE WITH SPRING LOADED SEALING MEMBER FACING INWARD AS SHOWN.
| MODEL | TYPE DRIVE | BEARING |
|---|---|---|
| 35V- | DIRECT- | 38441 |
| 36V- | INDIRECT- | 239092 |
| SHAFTS | KEY | TYPE |
|---|---|---|
| SINGLE SEAL MODELS | DOUBLE SEAL MODELS |
SHAFT
NO.| PART NO.| SHAFT| PART NO.
1| 233624| | | 88678| STRAIGHT – STANDARD
|
4| 247803| | | | SPLINE – 14 TOOTH
| |
11| 242287| | | | SPLINE – 14 TOOTH
| |
86| 392669| | | 393536| STRAIGHT – HEAVY DUTY
|
NOTE
WHEN ORDERED INDIVIDUALLY, FLEX SIDE PLATE KIT INCLUDES (4) F3 SEAL PACK SUB
ASSY’S.
Model Code
1 Viton Seals
(Omit if not required.)| 5 Port Connections
A – SAE 4-Bolt Flange| 8 Port Positions
See Chart Below
---|---|---
2 Series| 6 Mounting & Shaft Seals Assembly
F – Foot (Single Shaft Seal Assy.)
S – Flange (Double Shaft Seal Assy.)
Omitted- Flange (Single Shaft Seal Assy.)| 9
Design
3 Vane Type| 7 Shafts
1 – Square Key
4 – Splined
11 – Splined
86 – Square Key| 10
Rotation
(Viewed from Shaft End)
L – Left Hand (CCW Rotation)
Omitted – Right Hand Rotation
4 SAE Rated Capacity
(Rating @ 1200 RPM – 100 psi)
21 – 21 USgpm
25 – 25 USgpm
30 – 30 USgpm
35 – 35 USgpm
38 – 38 Usgpm
PARTS ORDERING
PARTS ARE THE SAME FOR BOTH RIGHT AND LEFT HAND ROTATION, WHEN ORDERING SPARE
CARTRIDGE PARTS, IT IS RECOMMENDED THEY BE OBTAINED IN CARTRIDGE KITS. KITS
ARE ASSEMBLED AND TESTED FOR EITHER RIGHT OR LEFT HAND ROTATION.
IF LEFT HAND ROTATION IS REQUIRED, IT SHOULD BE SPECIFIED ON PARTS ORDER BY
ADDING SUFFIX ‘‘L’’ TO KIT NUMBER. FOR EXAMPLE, 413420-L.
For satisfactory service life of these components, use full flow filtration to
provide fluid which meets ISO cleanliness code 16/13
or cleaner. Selections from pressure, return, and in-line filter series are
recommended.
Products we offer:
| • Cartridge valves | • PLUS+1® controllers |
|---|---|
| • DCV directional control valves | • PLUS+1® displays |
| • Electric converters | • PLUS+1® joysticks and pedals |
| • Electric machines | • PLUS+1® operator interfaces |
| • Electric motors | • PLUS+1® sensors |
| • Gear motors | • PLUS+1® software |
| • Gear pumps | • PLUS+1® software services, support and training |
| • Hydraulic integrated circuits (HICs) | • Position controls and sensors |
| • Hydrostatic motors | • PVG proportional valves |
| • Hydrostatic pumps | • Steering components and systems |
| • Orbital motors | • Telematics |
Danfoss Power Solutions is a global manufacturer and supplier of high-
quality hydraulic and electric components. We specialize in providing state-
of-the-art technology and solutions that excel in the harsh operating
conditions of the mobile off-highway market as well as the marine sector.
Building on our extensive applications expertise, we work closely with you to
ensure exceptional performance for a broad range of applications. We help you
and other customers around the world speed up system development, reduce
costs and bring vehicles and vessels to market faster.
Danfoss Power Solutions – your strongest partner in mobile hydraulics and
mobile electrification.
Go towww.danfoss.com for further product
information.
We offer you expert worldwide support for ensuring the best possible solutions
for outstanding performance. And with an extensive network of Global Service
Partners, we also provide you with comprehensive global service for all of
our components.
Hydro-Gear
www.hydro-gear.com
Daikin-Sauer-Danfoss
www.daikin-sauer-danfoss.com
Danfoss
Power Solutions (US) Company
2800 East 13th Street
Ames, IA 50010, USA
Phone: +1 515 239 6000| Danfoss
Power Solutions GmbH & Co. OHG
Krokamp 35
D-24539 Neumünster, Germany
Phone: +49 4321 871 0| Danfoss
Power Solutions ApS
Nordborgvej 81
DK-6430 Nordborg, Denmark
Phone: +45 7488 2222| Danfoss
Power Solutions Trading
(Shanghai) Co., Ltd.
Building #22, No. 1000 Jin Hai Rd
Jin Qiao, Pudong New District
Shanghai, China 201206
Phone: +86 21 2080 6201
---|---|---|---
Danfoss can accept no responsibility for possible errors in catalogues,
brochures and other printed material. Danfoss reserves the right to alter its
products without notice. This also applies to products already on order
provided that such alterations can be made without subsequent changes being
necessary in specifications already agreed.
All trademarks in this material are property of the respective companies.
Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights
reserved.