V-TAC VT-2943 LED Wall Light Instruction Manual
- June 3, 2024
- V TAC
Table of Contents
V-TAC VT-2943 LED Wall Light
TECHNICAL DATA
- MODEL: VT-2943
- WATTS: 3W
- LUMENS: 180LM
- BEAM ANGLE: 30°
- MATERIAL: DIE CAST ALUMINIUM
- DIMENSION: 120x120x45mm
- INPUT POWER AC: 100-240V, 50/60Hz
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician
- Proper grounding should be ensured throughout the installation.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- For Indoor use only
INSTALLATION DIAGRAM
INSTALLATION INSTRUCTION
- Switch off the main power
- Drill two holes on the wall and insert two plastic expansion bolts in it.
- Fix the base on the plastic expansion piece with self-tapping screws.
- Connect the supply leads with the terminal.
- Fix the lamp body on the plate and tighten the screws.
- Switch on and test the light.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>