IMADA FSA Series Force-Displacement Measurement Unit User Manual
- June 3, 2024
- IMADA
Table of Contents
IMADA FSA Series Force-Displacement Measurement Unit
INTRODUCTION
A measurement unit to draw force-displacement curves Ideal for sensation test or material characteristic evaluation High sampling rate and high data reproducibility
- The FSA series is a unit for force-displacement measurement including force gauge, test stand, cable and software.
- This unit is easy-handling owing to its compact size (desktop-type), enabling you to simply measure mechanical properties such as tension, compression and peeling force.
- Also, its high responsivity (2000Hz) offers precise measurement results with a smooth graph of force-displacement.
- Graphing is easily done by connecting FSA series and PC via attached USB cable. The graphing software equips useful functions for evaluation or analysis such as overlaying graphs for comparing, displaying statistical data, and leaving comments in a graph.
- It handles a wide range of measurement by using various optional attachments.
- Since the force gauge is removable, the range of measurement is expanded, and maintenance gets easier.
Features
Precise Measurement
- High sampling rate (2000Hz) accurately follows force changes and draws smooth graph of forcedisplacement curves in real time.
Outputs reports simply
- Equips functions to overlay up to 5 graphs and leave comments in the graph.
- Easily outputs the graphs and statical data to WORD, EXCEL, PDF, etc.
A wide range of measurements
- It handles a wide range of measurements by combining various optional attachments
Measuring examples of FSA series
Comprresion and tension tests of various materials/Simple evaluations of spring characteristics/Elasticity test of various materials/Insertion pressure evaluation of parts/Evaluation of switch characteristics/Peeling test of adhesive tape/Cushioning materials repulsion tests
Available data by FSA series
Force value when the specified displacement is compressed/pulled (Displacement when compressed/pulled with the specified force value)
**
| **
This unit is suitable for characteristic evaluation of such as cushioning-
materials or press-fitted parts by compression test since it allows drawing a
force-displacement graph and evaluating transition of the force value to the
compressed displacement. Also, as you see in the picture above, it enables
you to easily search for the force value at a specific displacement value on
the graph and leave a comment.
Displacement value when a sample is broken by compressing/pulling
|
This unit graphs the process and enables you to visually check the force
transition until the sample is broken. Also, it helps you to easily find the
force/displacement value and peak value when the sample is broken, and leave a
comment.
Hysteresis and returning zero
| 
For example, in click sensation test of tactile switch, hysteresis and
returning zero is obvious from the graph of a reciprocating motion. It is
simple to evaluate the graph by setting threshold value, searching for
returning peak values and inserting an arbitrary border line. Moreover, the
point of switch ON/OFF can be automatically defined and displayed by using
Mark On function.
Note: Custom-made cable is required for Mark-On function.
FSA series components
Accessories and description
| | 1.Force Gauge
Measuring part of force measurement which Indicates force and displacement values. It can be removed from a test stand and used as a handheld instrument. This unit handles a wide force range by replacing force gauges.
(Model: ZTA series)
| | 2. Test Stand (*1)
Drive unit part of measurement. It moves a force gauge by button operation to perform compression/tension measurement. A linear scale is installed, which allows displacement measurement by connecting with force gauge. (Model: Refer to P6 [Specifications/Individual System Details] for the details)
*** 3. Cable (2) Connects the force gauge and the test stand for control. (Model: CB-718)
| | 4. Software (*3)
Connect the force gauge and a PC by USB cable (included), drawing force- displacement graphs. Only for use on PC. (Model: Force Recorder Professional)
| | Included Attachments (*4)
Standard attachments are included for basic compression and pull tests.
| | (Examples of included attachments)
- FSA-MSL is not motorized due to manual type.
- FSA-MSL does not include the cable due to manual type.
- Monitor (PC) is not included.
- The included attachments are different depending on the range of force gauge. Refer to the specification sheet of standard attachment for the details
FSA Series Models
Vertical Type (Standard)| Vertical Type
(Precise/Multiple functions)
---|---
**Models| FSA-0.5K2- N FSA-1K2-N FSA-2.5K2- N FSA-
5K2-N| ****Models| **
FSA-0.5KE-__N FSA-1KE- N
– Standard model with high-cost performance
– Lineup in capacity from 500 to 5000N
– Digital setting of speed, repetition number and compression (tension) time, etc.
| – Advanced model suitable for precise measurement with high rigidity
– Lineup in capacity from 500N and 1000N
– Available for wide range of speed setting
– Equipped with many functions to enhance convenience such as digital setting of compression (tension) distance, contact detection, and more
| **
Horizontal Type| Portable
Models| FSA-0.5HK2- __N**
FSA-2.5HK2- __N
| Model| FSA-MSL-__N
– Horizontal model with high-cost performance
– Lineup with Max. force value of 500 to 5000N
– Digital setting of speed, repetition number and compression (tension) time, etc.
| – Small manual model with knob adjustment
– Max. force 50N
– Suitable for measurement at narrow spaces
|
Selecting Model
Specifications (General)
FSA series
Measurement Unit| Force| N, kgf, lbf
Displacement*| mm, inch
*** Resolution| Force| 4 digits (e.g. Resolution of 5N force gauge is
0.001N)
Displacement| 0.001mm (on software Force Recorder Professional) 0.01mm (on
force gauge display)
Accuracy| Force| +/- 0.2%F.S. +/-1 digit
Displacement| +/- 0.1mm +/- 1digit( with no load)(1)
Sampling cycle| 2000 data/sec
Display update cycle| 16 data/sec
Various function of force gauge| Customized display (header and footer), Peak
hold (tension and compression), Internal 1000 points data memory, Comparator
(judgment of OK or NG), Reversible display, Sign inversion, Zero clear timer,
+NG alarm, Off timer (auto power off), Dumping, Time display, 1st/2nd peak,
Displacement detection at force peak value, Displacement zero reset at
selected force, setting lock
Output function| USB,Serial(RS232C),Analog(Approx. +/- 2V),
Comparator, Over load,Sub comparator, USB flash drive (*2)
Motorized Stand Function| Stroke limit, Overload Prevention, Force
control3､Emergency Stop
Motorized Test Stand Power| AC100V-240V Free input (3)
Operating Environment| Temperature:0 – 40°C Humidity:20 -80%RH
**** Accessories| Instruction Manual, Inspection Certificate, Warranty
Certificate, Power cable, Spare hues, USB cable, Driver CD-ROM(including
software for data log “Force Logger”), Graphing software “Force Recorder
Professional.”
- When maximum force is applied, the stand may be deformed vertically as below.
- FSA-0.5 to 5K2: less than 0.5mm, FSA-0.5/1KE: less than 0.25mm, FSA-0.5/2.5HK2 : less than 0.5mm
- USB flash drive is not included.
- The value of Force control is specified with the absolute value.
- Power supply units are required individually for Motorized Test Stand and the Force gauge.
Software specifications (General)
| Operating environment | OS: Windows 7/8/8.1/10 |
|---|---|
| **** Hardware | CPU: Pentium4 (1GH more) or more is recommended |
Memory: 2GB more recommended
Hard Disk: 10GB (data storage area) or more
Platform| NET Framework or more
Execution environment| Microsoft Internet Explorer 6.0 or later
Windows Installer 3.1 or later
Connecting Port| USB1.1 and USB2.0 * connector
We do not guarantee the operation with USB 3.0.
FSA Series|
---|---
Spec/Model
| FSA-0.5K2| FSA- 1K2| FSA-2.5K2| FSA- 5K2| FSA-0.5KE| FSA- 1KE| FSA-
0.5HK2
| FSA-
2.5HK2
| FSA- MSL|
| 2N,5N,20N,50N|
Force| 100N,200N,500N| |
Range| | 1000N| 1000N
2500N
| 1000N
2500N
5000N
| | 1000N| | 1000N
2500N
|
Test Stand Capacity
|
500N
|
1000N
|
2500N
|
5000N
|
500N
|
1000N
|
500N
|
2500N
|
50N
|
Stroke (*1)
|
230mm
|
290mm
|
290mm
|
295mm
|
265mm
|
290mm
|
230mm
|
265mm
|
80mm
|
Max. sample height (*2)|
235mm
|
300mm
|
320mm
|
380mm
|
295mm
|
320mm
|
245mm
|
340mm
|
44mm
|
Speed
|
10 to 300 mm/min
| 0.5 to 300 mm/min|
0.5 to 600 mm/min
|
10 to 300 mm/min
| |
Stroke limit setting|
Manual
|
Digital/Manual
|
Manual
| |
| 3 types measuring modes (JOG/Manual/Cycle), Counter/Timer,| |
Functions| Force Control, Overload Prevention, Emergency Stop|
of test stand
(*3)
|
| Contact Detection Break Detection Copy
Menu Lock Easy Setup
| |
Included test stand
| MX2-500N
-FA
| MX2- 1000N
-FA
| MX2- 2500N
-FA
| MX2- 5000N
-FA
|
EMX-500N
| EMX- 1000N| MH2-500N
-FA
| MH2- 2500N
-FA
|
MSL-50N
|
Option of extended stroke (*4)| -L (+200mm)
-2L (+400mm)
| -L (+300mm)| -L (+300mm)| -EXT (+200mm) (*5)| -L (+300mm)| -L (+300mm)| | |
|
| -V45| -V75| -V75| | | | -V45| -V75| |
| (1.5 to 45)| (2.5 to 75)| (2.5 to 75)| (1.5 to 45)| (2.5 to 75)|
| -V90| -V150| -V150| -V90| -V150|
Option of different speed| (3 to 90)
-V450 (15 to 450)
-V600
| (5 to 150)
-V750 (25 to 750)
-V1000
| (5 to 150)| (3 to 90)
-V450 (15 to 450)
-V600
| (5 to 150)|
| (20 to 600)| (35 to| | (20 to 600)| |
| -V900| 1000)| | -V900| |
| (30 to 900)| | | (30 to 900)| |
Option of output (*6)| -CN| Equipped| -CN| |
- Stroke means movable capacity. Stroke range varies depending on the force gauge and the attachments combined. Long Stroke option is available. Refer to [option of extended stroke] of the above table for details.
- [Max. sample height] means the distance between table and the tip of the measuring shaft of the force gauge (1000N or less) when the head is at the top without any attachments. The values of FSA-2.5K2/FSA-5K2 are when over 2500N models of ZTA series are attached. The value of FSA-0.5HK2 is the distance between the tip of the fixed axle of the table and the tip of the measuring shaft of force gauge (1000N or less). The value of FSA-2.5HK2 is when high capacity model of force gauge (2500N or more) is attached.
- Refer to the individual specification for the details of the motorized test stands.
- When change the speed and stroke, the capacity may decrease. Contact us for the details.
- For FSA-5K2, it raises and extends the post of the stand. The Max. Sample height is extended but the stroke does not change. Not suitable for measurement of small sample.
- [Option of output] means the function allows to interface with external devices such as interlocking shield.
Related Products (attachments)
Compression Test Accessory
UR series
| Pantograph Grip
PGC series
| Film Grip
FC series
| 90-degree peel test Fixture
P90- 200N
Hemispherical polyurethane Jig| Easy griping for deformable samples| Suitable
for gripping thin film forms| Recommended for adhesive tape, tests
| | |
- Multiple choices of accessories and jigs are available for various measurements Custom-made jigs can be made to order based on your measurement requirements.
- Refer to the specification of each attachment for more
Cautions
- Information in this document is subject to change without prior
- This document is product descriptions and handling precautions, and do not guarantee various characteristics or safety.
- This product is designed for force measurement purpose
- Do not copy and use this content without
- Some sample cannot be measured depending on their materials or
- Please do not add load over capacity of a force gauge to prevent sensor break-
- Displacement reading error can occur due to deflection of a sensor or test stand when load is
- Optional attachment and PC are Not included in this unit
- Software could not work in some operating environment
IMADA CO., LTD.
99 Jinnoshinden-cho aza Kanowari Toyohashi Aichi 441-8077, JAPAN
- Tel: +81-(0)532-33-3288
- Fax: +81-(0)532-33-3866
- E-mail: info@forcegauge.net
- Website: http://www.forcegauge.net/en/
Visit our website for more information on a wide range of product specifications, measurement applications and videos
