Dimplex RAL15-AU Rail 1.5kW Electric Fireplace Instruction Manual

Dimplex RAL15-AU Rail 1.5kW Electric Fireplace

IMPORTANT
THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE.

CAUTION: FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE INJURY AND/OR DAMAGE AND MAY INVALIDATE YOUR WARRANTY

Please read the operating instructions carefully before using your product for the first time and keep them in a safe place.

• When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock and injury to persons, including the following:
• If the appliance is damaged, check with the supplier before installation and operation.
  • Do not use outdoors.
  • Do not use in the immediate surroundings of a bath, shower or a swimming pool.
  • Do not use this heater if it has been dropped.
  • Do not use if there are visible signs of damage to the heater.
  • Use this heater on a horizontal and stable surface, or fix it to the wall, as applicable.
• Do not locate the appliance immediately below a fixed socket outlet or connection box.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not use this appliance in series with a thermal control, a program controller, a timer or any other device that switches on the heat automatically, since a fire risk exists when the appliance is accidentally covered or dis-placed.
• In the event of a fault, unplug the appliance.
• Unplug the appliance when not required for long periods.
• This product is only intended for INDOOR RESIDENTIAL applications only.
• DO NOT cover cord with carpeting, throw rugs, runners, or similar coverings.
• DO NOT route cord under furniture or appliances. Take care to position the cord away from traffic areas and where it will not be a tripping hazard.
• This appliance must not be used in a bathroom.
• Although this appliance complies with safety standards, we do not recommend its use on deep pile carpets or on long hair type of rugs
• The appliance must be positioned so that the plug is accessible.
• If the supply cord is damaged it must be replaced by the manufacturer or service agent or a similarly qualified person in order to avoid a hazard.
• Keep the supply cord away from the front of the appliance.
• Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.
• To reduce the risk of fire, keep textiles, curtains and or flammable material a minimum distance of 1m from the air outlet.
• In order to avoid overheating, DO NOT COVER the appliance. Do not place material or garments on the appliance, or obstruct the air circulation around the appliance, for instance by curtains or furniture, as this could cause overheating and a fire risk.
• This Heater carries the warning symbol indicating that it must not be covered.
• In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
• CAUTION Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
• Children shall not turn on/off the appliance.
• Ensure that furniture, curtains or other combustible material are positioned no closer than 1 meter from the appliance.
• Unplug the appliance when not required for long periods.
• Keep the supply cord away from the front of the appliance.
• This product is only suitable for well insulated rooms or occasional use.

WARNING: KEEP BATTERIES OUT OF REACH OF CHILDREN

• Swallowing may lead to serious injury in as little as 2 hours or death, due to chemical burns and potential perforation of the esophagus.
• If you suspect your child has swallowed or inserted a button battery immediately call the 24-hour Poisons Information Centre on 13 11 26 (in Australia) or 0800 764 766 (in New Zealand) for fast, expert advice.
• Examine devices and make sure the battery compartment is correctly secured, e. g. that the screw or other mechanical fastener is tightened. Do not use if the compartment is not secure.
• Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous.

WARNING
KEEP OUT OF REACH OF CHILDREN Swallowing can lead to chemical burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion. Seek medical attention immediately.

CAUTION: No obvious symptoms
Unfortunately, it is not obvious when a button or coin battery is stuck in a child’s esophagus (food pipe).

There are no specific symptoms associated with this. The child might:

• cough, gag or drool a lot
• appear to have a stomach upset or virus
• be sick
• point to their throat or stomach
• have a pain in their abdomen, chest or throat
• be tired or lethargic
• be quieter or more clingy than usual or otherwise ‘not themselves’
• lose their appetite or have a reduced appetite
• not want to eat solid food/be unable to eat solid food

These types of symptoms vary or fluctuate. with the pain increasing and then subsiding.
A specific symptom to button and coin battery ingestion is vomiting fresh (bright red) blood. If the child does this seek immediate help. The lack of clear symptoms is why it is important to be vigilant with ‘flat’ or spare button or coin batteries in the home and the products that contain them.

• Exposed to the weather outdoors

• Near water
  

• If the power cable wires are frayed or cut

• Where small children may be left unattended
  

• No extension leads or power boards

• No extension leads or power boards
  

• On a slope or uneven surface

• Where there is risk of fire or close to a naked flame
  

• Where it may be damaged by chemicals
  

• Where there is a risk of interference by foreign objects
  

• This product is not made for DIY repair
  

• If there is a risk of water falling on the unit

Specifications

Thermostat Control
Remote Control| Yes
Yes
Warranty| 2 Years
Dimensions (w x d x h)| 1100w x 280d x 900h

For greater precision, please always refer to the rating label placed on the product.

Product Dimensions

Setup

General Information

• The fire incorporates a flame effect, which can be used with or without heat, so that the comforting effect may be enjoyed at any time of the year.
• To reduce heat loss and to prevent any chimney up draft affecting the operation of your stove fire, we recommend that the chimney flue is sealed off.
• Always ensure that the appliance is sitting on a level surface.
• Before connecting the appliance, check that the supply voltage is the same as that stated on the appliance.

Please note: Used in an environment where background noise is very low, it may be possible to hear a sound which is related to the operation of the fan heater & flame effect. This is normal and should not be a cause for concern.

Electrical Connection

This heater must be used on an AC ~ supply only and the voltage marked on the heater must correspond to the supply voltage. Before switching on, please read the safety warnings at the start of the instruction manual and operating instructions to follow. Please retain this user’s guide for future reference

If you settle this appliance in an existing chimney space, we recommend that;

1. You have your chimney cleaned by a competent chimney sweep.
2. You block off the chimney flue.

This procedure is important for the efficient operation of the heating unit and will also reduce heat loss up the chimney.
Ensure that all packing items are removed (read any warning labels carefully). Retain all packing for possible future use e.g. in the event of moving or returning the appliance to your supplier.

Light Emitting Diode

This fire is fitted with LED (Light Emitting Diode) bulbs in place of traditional incandescent bulbs. These generate the same light levels as traditional bulbs, but use a fraction of the energy consumed. These LED lamps are maintenance free and should not require replacing during the life of the product.

Mounting Glass frame

Product comes with glass frame not fixed to fire, but packed separately to the fire in its own packing. To fix frame, the hooks on both sides at the top need to align with the corresponding slots on both sides of the fire. When hooked in place, the frame hangs vertical covering the fire.

WARNING: FALLING OR TIPPING APPLIANCES CAN CAUSE INJURY OR DEATH OF YOUNG CHILDREN, PLEASE ENSURE CHILDREN DO NOT CLIMB, HANG OR STAND ON THIS PRODUCT.
WARNING: THIS APPLIANCE IS PROVIDED WITH A TIPPING RESTRAINT. THIS RESTRAINT IS NOT A SUBSTITUTE FOR PROPER ADULT SUPERVISION. THIS RESTRAINT MAY PROVIDE PROTECTION AGAINST TIPPING FURNITURE. DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE. FAILURE TO DETACH THIS RESTRAINT BEFORE MOVING FURNITURE MAY RESULT IN INJURY AND DAMAGE.

Tipping Restraint Kit
This product is provided with a ‘Tipping Restraint Kit,’ to prevent the product accidentally tipping over. Fitting instructions are supplied with this kit. Please follow these instructions carefully.

Thermal Safety Cut-out
A thermal safety cut-out is incorporated in the fan heater to prevent damage due to overheating. This can happen if the heat outlet was restricted in any way. If the cut-out operates, unplug the heater from the socket outlet and allow approximately 10 minutes before reconnecting. Before switching the heater back on remove any obstruction that may be restricting the heat outlet, then continue normal operation.
WARNING: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

Tipping restraint kit

Control Panel & Remote

WARNING: FAILURE TO FOLLOW THESE OPERATING INSTRUCTIONS MAY RESULT IN INJURY AND/OR DAMAGE.

Remote control

The maximum r anger of use is ~ 9 meters.
WARNING: It takes time for the receiver to respond to the transmitter. Do not press the buttons more than once within two seconds for correct operation.
NOTE: The receiver for the remote control is located in the display, aim the remote control in this direction when inputting demands.

To replace the battery:

1. Remove the screw, push down on the battery cover located on the back of the remote control. Slide the battery cover open.
2. Install 1 x 3V CR2025 Lithium battery in the battery holder. The positive (+) side of the battery faces up.
3. Close the battery cover and replace the screw

Discard leaking batteries:

Dispose of batteries in the proper manner according to provincial and local regulations. Any battery may leak electrolyte if mixed with a different battery type, if inserted incorrectly, if all batteries are not replaced at the same time, if disposed on a fire, or if an attempt is made to change a battery not intended to be recharged.

Operation

Operating Instructions

| Icon| Function| Description
---|---|---|---
A|

| Power| Press to turn unit Off or On.
Unit Off
Press to turn everything Off. Press again to turn unit On with previous settings.
Unit On
Press to turn unit On with previous settings.
– If the flame effect was On, the flame will turn on and the previous heat setting will be activated (On or Off). The display will show the current heater temperature set- ting and after 2 seconds displays the room temperature.
– (Remote only) If the flame effect was Off, the previous heat setting will be activated (On or Off).
– (Panel only) If the flame effect was Off, the flame will turn on and the previous heat setting will be activated (On or Off).
B| | Heat| Heat On
Press to turn heat On (indicated by 1 short beep). The display will show the current heater temperature setting and after 2 seconds displays the room temperature. Use the Temperature icon to change the heater temperature setting.
Heat Off
Press to turn the heat Off (indicated by 1 short beep).
NOTE: After the heater is switched off, the fan will continue on for 60 seconds before turning off.
C| | Temperature| Press multiple times to raise the heater temperature in 1°F (1°C) increments. The display will show the current temperature. The temperature range is 62°-78°F (17°- 26°C). This feature is active whenever the heat is enabled.
D| | Flame Speed| Press multiple times to toggle through flame speeds (minimum, medium, maximum). The display will show the current speed number (F1, F2, F3 respectively).
E|

|

Color Themes

| Press multiple times to change the media and flame base course. This feature is active only when the flame effect is on. The display will show the theme (t0, t1, t2, etc.) XHD28L, XHD26L or XHD23L (Log unit) themes:
– Theme t0 – no flame
– Theme t1 – Natural (flame base off)
– Theme t2 – Red highlights (flame base red/orange)
– Theme t3 – Blue highlights (flame base blue)
F|

| Brightness| Press to change the fame and logs brightness. Display will show b3, b1, b2 respectively.
• High
•Low
•Medium
G| | Flame| Press to turn the flame effect on. Press again to turn the flame effect off.
H| | Timer| Press multiple times to change the sleep timer by 0.5 hours from 0.5-8 hours before turning off. Press again and the remaining time on the timer displays.

User Modes:

Flame Speed (  ) on the unit and hold until a beep is heard and the display flashes. (To revert back to Celsius repeat this action).
Disable/Enable Heat Options| Hold both the Heat button (   ) and the Temp button ( ) on the unit for 2 seconds. When the heater has been disabled the display will read “–” and beep. To enable the heat, repeat this action.

Cleaning

• Over time, dust can accumulate which can effect performance. It is recommended to clean the unit at least once a month.
• CAUTION: ALWAYS Turn the unit OFF and disconnect the appliance from the power supply before undergoing any cleaning and maintenance.
• The surfaces of the heater should be given an occasional wipe with a dry soft cloth. Do not use detergents, abrasive cleaning powder or furniture polish as this can damage the surface of the product.
• The glass door should be cleaned carefully with a chamois leather. Do not use proprietary cleaners.
• To remove any accumulation of dust or fluff, the soft brush attachment of a vacuum cleaner should occasionally be used to clean the outlet grille of the fan heater located under the stoves main body.
• To clean the fuel effect, remove the ash/crystal and wash in warm water. The plastic tray should be wiped clean with a damp cloth. When completely dry replace the ash/crystal and arrange as described in this manual.

Warranty

Please refer to the warranty card in the box for warranty information. For any troubleshooting advice, please contact the relative Customer Care Centre below.

Glen Dimplex Australia Pty Ltd

• 8 Lakeview Drive,
• Scoresby 3179, Victoria Australia
• Ph: 1300 556 816

Glen Dimplex New Zealand Ltd

• 38 Harris Road, East Tamaki, Auckland 2013
• Ne Zealand
• Ph: 0800 666 2824

Recycling: Do not dispose of electrical appliances as unsorted municipal waste. Use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the ground water, polluting the food chain and damaging health and well-being.

References

• Welcome to Dimplex Australia | Dimplex

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>