GALAX Vivance-01 Gaming Monitor User Manual

GALAX Vivance-01 Gaming Monitor

SAFETY INFORMATION

• Read these instructions -All the safety and operating instructions should be read before this product is operated.

• Keep these instructions- The safety and operating instructions should be retained for future reference.

• Heed all warnings -All warnings on the appliance and in the operating instructions should be adhered to.

• Follow all instructions-All operating and usage instructions should be followed.

• Do not use this equipment near water, or in humid environments- The appliance should not be used near water or moisture e.g. in a wet basement or near a swimming pool.

• Clean only with a dry cloth. Do not use solvents or petroleum-based fluids.

• Do not block any ventilation openings.

• Do not install near any heat sources such as radiators, stoves or other apparatus (including amplifiers) that produce heat.

• Do not tamper with the supplied plug. This plug is a B51363 standard plug.
  Protect the power cord from being walked on or trapped, particularly at the plug and at the point where it exits from the appliance.

• Only use attachments/accessories specified by the manufacturer.
  Use only with a cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart or stand is used, use caution when moving it to avoid any injuries or damage from it tipping over.

• Unplug the apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified personnel. Servicing is required when the apparatus has been
  damaged in any way, such as if the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus or it has been exposed to rain or moisture, it does not operate normally or has been dropped.

• Please keep the unit in a well-ventilated environment.

• The monitor should only be connected to a mains power supply as rated on the back of the equipment.

• To prevent overload, do not share the same power supply socket with too many other electronic components.

• Do not place any connecting wires where they may be stepped on or tripped over.

• Do not place heavy items on the cable as this may cause damage.

• When removing from a socket hold by the plug and not the wires.

• Disconnect the power immediately and seek professional help if the plug or cable is damaged, liquid has spilt onto the set, if accidentally exposed to water or moisture, if anything accidentally penetrates the ventilation slots or if the set does not work normally.

• Do not remove the safety covers. There are no user-serviceable parts inside. Trying to service the unit yourself is dangerous and may invalidate the product’s warranty. Only qualified personnel should service this apparatus.

• Do not block ventilation slots on the back cover. The monitor can be placed in a cabinet but ensure at least 5cm (2″) clearance all around. Do not tap or shake the screen, this may damage internal components.

• WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and objects filled with liquids, such as vases, shall not be placed on the apparatus.

• WARNING: The wall plug socket is used as a disconnection device and should remain readily accessible.

• WARNING: The batteries shall not be exposed to excessive heat such as direct sunlight or fire.

AT FULL. VOLUME, prolonged II.ISIEN!IING MIAY DAMAGE IHE USE1R’S IHEARIING.

• This warming sign l!S to warn of dangerous voltage inside the product.
• CAUTION: To reduce the risk of electric shock, DO NOT remove the cover {o,r back). No user-serviceable parts, insi1de. Refer servicing to qualified service personnel.

WHAT’S INCLUDED

DISCLAIMER
Features and settings with their respective terms and images may be subject to change; thus there may be slight differences between the manual and the product.

CONNECTIONS AVAILABLE ON THE MONITOR

1. Power
2. DPl
3. HDMI 1
4. HDMI 2
5. DP2
6. AUDIO OUT

HDMI
The terms HDMI, HDMI High Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

GETTING STARTED

MONITOR CONTROLS

Up/Down/Left/Right

• Scene Mode
• Crosshair, press switches to a different
• Connector Signal, Exiting
• Contrast and Brightness

Press

• Power on
• Entering submenus
• Confirming a selection or setting
• Entering the function menu, Up/Down/Left/Right
  • Scene Mode
  • Power off
  • Connector Signal
  • Launching the On-Screen Display (OSD)
  • Up: Right, up
  • Down: Left, down

G-SYNC® EASY ON BUTTON

INITIAL SETUP

Connect the monitor to a power outlet.

1. Press the POWER button on the monitor or to turn it on (The indicator will be blue).
2. Connect the relevant cable to the corresponding input on the monitor. The source will be automatically detected.
3. To change between inputs, press the “Source” button to enter the source menu. Use the “◄”and”►” buttons to choose the input source between Auto Select, DPl, DP2, HDMI, and HDMl2.

MENU OPTIONS
The menu for the monitor can be accessed by pressing the menu button on the control panel. This menu is separated into the following sub-menus: Picture Settings, Image Settings, Colour Temperature, OSD Settings, Reset, and Miscellaneous options, details of each menu can be found in the following section.

OSD MENU

Profiles

• Standard
  Enter standard mode.

• Game
  The game mode is divided into FPSl, F PS2, RTS, Night Vision, Gamerl, Gamer2, and Gamer3.

• Movie
  Enter movie mode.

• Web
  Enter web mode.

• Text
  Enter text mode.

Picture

• Sharpness
  Change the clarity from Oto 100.

• Blue Light Filter
  Change the display blue light from Oto 100.

• Aspect Ratio
  Change the image aspect ratio to Wide Screen,4:3, 5:4,16:9, 16:10.

• Advanced DCR
  Change the Advanced DCR from Oto 100.

• Response Time
  Turn the Response Time feature Off, High, Middle, Low.

• G-SVNC®
  Turn the G-SYNC® feature On or Off.

• AMBR
  Turn the Advanced Motion Blur Reduction feature On or Off.

Color

Contrast/Brightness
Adjust the display brightness value contrast value from O to 100.

Color Temperature
Turn the Color Temperature cool, standard, warm, user color.

HDR
Turn the HOR Off, auto, 2084.

Audio

Volume
Change the audio source volume from Oto 100

Mute
Turn On or Off to mute the audio source.

Input
Switch the signal input to DPl, HDMll, HDMl2, DP2.

Settings

• Language Select
  Change the OSD Menu display language.

• Resolution Notice
  Turn the Resolution Notice feature On or Off.

• Information
  Resolution: 2560×1440 Horizontal frequency: 213.3KHz Vertical frequency: 144.0Hz, Pixel Clock: 580.1MHz.

• OSDSize
  Menu shows native, large.

• OSDTimeout
  Change the OSD Timeout from Oto 100.

• OSD Background
  Turn the OSD Background feature On or Off.

• Auto Power Off
  Turn the Auto Power Off feature On or Off.

• Sleep
  Sleep time is 30, 45, 60, 120, off.

• Auto Detect
  Turn the Auto Detect feature On or Off.

• Reset
  Restore original settings.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>