GALAX PRO DC-20V Cordless Drill Driver User Manual

GALAX PRO DC-20V Cordless Drill Driver

Introduction

A strong and multipurpose tool, the GALAX PRO DC-20V Cordless Drill Driver effortlessly handles a broad variety of driving and drilling jobs. Professionals and do-it-yourselfers alike will love this drill driver for its high-performance engine and ergonomic design, which provide unparalleled performance and comfort.

The initial price of the GALAX PRO DC-20V Cordless Drill Driver was $68.99. It was launched on April 22, 2019, offering customers a powerful and versatile solution for their drilling and driving needs.

Whether you’re driving or drilling, the GALAX PRO DC-20V Cordless Drill Driver has you covered with its small size, powerful performance, and extensive accessory kit. This drill driver is perfect for any task, from home improvement to professional use on the job site.

Specifications

Li-ion Batteries, 1 x Fast Charger, 11pcs x Accessories (3 drilling bits and 8 screwdriver bits), 2 * Belt Clips, 2 x User manuals, 1 x Tool Bag for Storage, 1 x Warranty Card
Special Features| LED light, convenient belt clip, compact and lightweight design, variable speed pressure trigger, aluminium gear housing for durability, 3/8” keyless chuck with safety lock and all-metal gears
Usage| Wide range of drilling, screw driving, and fastening applications
Batteries Included| Yes
Batteries Required| Yes
Battery Cell Type| Lithium Ion
Battery Capacity| 1300 Milliamp Hours

Box Contents

The GALAX PRO DC-20V Cordless Drill Driver comes with everything you need to get started right out of the box:

1. 20V Hand Drill
2. 20V Impact Driver
3. 1300mAh Li-ion Batteries
4. Fast Charger
5. 11pcs Accessories (3 drilling bits and 8 screwdriver bits)
6. 2 Belt Clips
7. 2 User Manuals
8. Tool Bag for Storage
9. Warranty Card

Features

The GALAX PRO DC-20V Cordless Drill Driver offers a range of features tailored to meet various drilling and fastening needs. Here are its key features:

• Powerful Performance : Equipped with a powerful copper motor, delivering 265 in-lbs (30Nm) max torque for efficient drilling and driving tasks.

• Dual-Speed Functionality : Offers 2-speed settings (high: 0-1500 RPM, low: 0-400 RPM) to adapt to different drilling and fastening requirements.

• 19+1 Clutch Settings : Features a 19+1 position clutch with a 3/8″ keyless chuck for precise torque adjustment, allowing for accurate drilling and screw driving.

• Efficient Impact Driver : The impact driver delivers 882.5 in-lbs (100Nm) of maximum torque, with a high-speed motor of 2,800 RPM and 3,000 BPM for superior fastening power.

• Versatile Chuck Design : Utilizes a 1/4″ self-locking hex chuck for easy and quick bit changes, ensuring flexibility and convenience during operation.

• Ergonomic Design : Designed with a soft rubber handle for a comfortable grip, minimizing user fatigue during extended use.

• Built-in LED Light : Features a bright LED light to illuminate dark workspaces, enhancing visibility and accuracy during drilling and driving tasks.

• Belt Clip : Comes with a convenient belt clip for easy transportation and accessibility, allowing users to carry the drill driver hands-free when working at heights or in tight spaces.

• 20V Lithium-Ion Battery : Includes a 1.3Ah lithium-ion battery pack for long-lasting power, with a battery indicator to monitor the charge status in real-time.

• Compact and Lightweight : Boasts a compact and lightweight design, making it easy to maneuver and ideal for use in confined or overhead spaces.

Usage Instructions

• Powering On/Off :

• • To turn on the drill driver, press the trigger switch located on the handle. Release the switch to stop the operation.
  • Ensure the forward/reverse switch is in the desired direction before operating the tool.

• Selecting Speed :

• • Use the speed adjustment switch to select between high-speed (0-1500 RPM) or low-speed (0-400 RPM) settings, depending on your task’s requirements.

• Drilling :

• • Insert the desired drill bit into the chuck and tighten securely.
  • Position the drill bit on the surface to be drilled, ensuring it is perpendicular to the workpiece.
  • Apply steady pressure on the tool and engage the trigger to start drilling.
  • Allow the drill bit to penetrate the material gradually, applying consistent pressure as needed.

• Driving Screws :

• • Insert the appropriate screwdriver bit into the chuck and tighten it securely.
  • Position the screw on the desired location and apply gentle pressure to engage the screw.
  • Activate the trigger to drive the screw into the material, adjusting the speed as necessary.

• Using the Impact Driver :

• • Insert the required bit into the 1/4″ hex chuck and ensure it is securely locked in place.
  • Position the impact driver on the screw or fastener and engage the trigger to apply torque.
  • Adjust the pressure on the trigger to control the driving speed and torque output.

• Battery Charging :

• • When the battery needs recharging, connect the charger to a power source and insert the battery pack.
  • Follow the manufacturer’s instructions for charging time, typically around one hour for a full charge.
  • Ensure the battery is fully charged before using the tool to maintain optimal performance.

Care and Maintenance

• Keep the drill driver clean and free of debris after each use.
• Store the tool in a dry place away from moisture and extreme temperatures.
• Periodically inspect the tool for any signs of wear or damage, and replace worn-out parts as needed.

Troubleshooting Guide

using the provided charger.
| 2. Faulty trigger switch| 2. Check the trigger switch for any damage or debris. If necessary, replace the switch.
| 3. Loose battery connection| 3. Ensure the battery is securely inserted into the tool and making proper contact.
| 4. Battery pack failure| 4. Try using a different fully charged battery pack. If the issue persists, replace the pack.
Weak or intermittent power output| 1. Low battery charge| 1. Charge the battery fully before use.
| 2. Worn-out or damaged drill bit| 2. Replace the drill bit with a new one.
| 3. Loose chuck grip| 3. Tighten the chuck securely around the drill bit.
| 4. Motor issues| 4. If the motor is faulty, contact customer support for repair or replacement.
Excessive heat or unusual noise| 1. Overheating motor| 1. Allow the tool to cool down before further use.
| 2. Misaligned chuck| 2. Check the chuck for any misalignment and correct it if necessary.
| 3. Debris inside the chuck or motor housing| 3. Clean the chuck and motor housing thoroughly to remove any debris.
| 4. Worn-out motor brushes| 4. If the brushes are worn, replace them according to the manufacturer’s instructions.
Impact driver not engaging| 1. Incorrect bit size or type| 1. Ensure the bit is compatible with the impact driver’s chuck.
| 2. Loose chuck grip| 2. Tighten the chuck securely around the bit.
| 3. Impact mechanism issues| 3. If the impact mechanism is faulty, contact customer support for assistance.

Contact Information

To contact Galaxia Tech, you can reach out to them through the following contact information:

• Email:  silver.cao@galaxia-tech.com
• Phone:  +86 18657198515
• Address:  1158 South Longqian Street, Jinhua, Zhejiang, China

You can use this information to get in touch with Galaxia Tech for any inquiries or assistance

FrequentlyAsked Questions

What makes GALAX PRO DC-20V Cordless Drill Driver stand out from competitors?

GALAX PRO DC-20V Cordless Drill Driver stands out with its powerful copper motor, delivering high torque and efficient performance for various drilling and driving tasks.

How does GALAX PRO DC-20V Cordless Drill Driver compare in terms of torque?

With a maximum torque of 265 in-lbs (30Nm) for drilling and 882.5 in-lbs (100Nm) for impact driving, GALAX PRO DC-20V Cordless Drill Driver offers impressive power compared to competitors.

Can GALAX PRO DC-20V Cordless Drill Driver be used in dark areas?

Yes, GALAX PRO DC-20V Cordless Drill Driver features a built-in bright LED light, ensuring visibility and facilitating work in dimly lit spaces.

What is the battery capacity of GALAX PRO DC-20V Cordless Drill Driver?

GALAX PRO DC-20V Cordless Drill Driver comes with a 20V 1.3Ah lithium-ion battery, providing ample power for extended use.

How does GALAX PRO DC-20V Cordless Drill Driver handle different materials?

GALAX PRO DC-20V Cordless Drill Driver offers versatility with a max drilling capacity of 30mm (1-1/5 inch) for wood and 10mm (3/8 inch) for steel, making it suitable for various materials.

Is GALAX PRO DC-20V Cordless Drill Driver suitable for professional use?

Yes, GALAX PRO DC-20V Cordless Drill Driver is designed to meet the demands of both DIY enthusiasts and professionals, offering reliable performance and durability.

What safety features does GALAX PRO DC-20V Cordless Drill Driver have?

GALAX PRO DC-20V Cordless Drill Driver includes a 19+1 position clutch with a 3/8 inch key-less chuck for better torque adjustment and size control, ensuring safe and precise drilling and driving.

How does GALAX PRO DC-20V Cordless Drill Driver handle different speeds?

GALAX PRO DC-20V Cordless Drill Driver features a 2-speed transmission (0-400 RPM and 0-1500 RPM) for versatile drilling applications, providing optimal speed control for various tasks.

Can GALAX PRO DC-20V Cordless Drill Driver be used for impact driving?

Yes, GALAX PRO DC-20V Cordless Drill Driver functions as an efficient impact driver with a self-locking hex chuck and variable speed pressure trigger for precise screw driving.

Does GALAX PRO DC-20V Cordless Drill Driver come with accessories?

Yes, GALAX PRO DC-20V Cordless Drill Driver comes with a comprehensive set of accessories, including drilling bits, screwdriver bits, belt clips, and a tool bag for convenient storage.

How does GALAX PRO DC-20V Cordless Drill Driver handle ergonomics?

GALAX PRO DC-20V Cordless Drill Driver features a soft rubber handle for comfortable grip, ergonomic design, and a belt clip for easy carrying, enhancing user experience and reducing fatigue.

What is the charging time for GALAX PRO DC-20V Cordless Drill Driver?

GALAX PRO DC-20V Cordless Drill Driver offers fast charging, typically taking 1 hour to fully charge the included 1.3Ah lithium-ion battery.

Video- Product Overview

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>