GALAX PR-01 24 Inch FHD VA Monitor User Manual

GALAX PR-01 24 Inch FHD VA Monitor

SAFETY INFORMATION

• Read these instructions – All the safety and operating instructions should be read before this product is operated.
• Keep these instructions – The safety and operating instructions should be retained for future reference.
• Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
• Follow all instructions-All operating and usage instructions should be followed.
• Do not use this equipment near water, or in humid environments- The appliance should not be used near water or moisture e.g. in a wet basement or near a swimming pool.
• Clean only with a dry cloth. Do not use solvents or petroleum based fluids.
• Do not block any ventilation openings.
• Do not install near any heat sources such as radiators, stoves or other apparatus (including amplifiers) that produce heat.
• Do not tamper with the supplied plug. This plug is a B51363 standard plug.
• Protect the power cord from being walked on or trapped, particularly at the plug and at the point where it exits from the appliance.
• Only use attachments/accessories specified by the manufacturer.
• Use only with a cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart or stand is used, use caution when moving it to avoid any injuries or damage from it tipping over.
• Unplug the apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as if the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus or it has been exposed to rain or moisture, it does not operate normally or has been dropped.
• Please keep the unit in a well-ventilated environment.
• The monitor should only be connected to a mains power supply as rated on the back of the equipment.
• To prevent overload, do not share the same power supply socket with too many other electronic components.
• Do not place any connecting wires where they may be stepped on or tripped over.
• Do not place heavy items on the cable as this may cause damage.
• When removing from a socket hold by the plug and not the wires.
• Disconnect the power immediately and seek professional help if the plug or cable is damaged, liquid has spilt onto the set, if accidentally exposed to water or moisture, if anything accidentally penetrates the ventilation slots or if the set does not work normally.
• Do not remove the safety covers. There are no user serviceable parts inside. Trying to service the unit yourself is dangerous and may invalidate the product’s warranty. Only qualified personnel should service this apparatus.
• Do not block ventilation slots on the back cover. The monitor can be placed in a cabinet but ensure at least 5cm (2″) clearance all around. Do not tap or shake the screen, this may damage internal components.
• WARNING : To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and objects filled with liquids, such as vases, shall not be placed on the apparatus.
• WARNING : The wall plug socket is used as a disconnection device and should remain readily accessible.
• WARNING : The batteries shall not be exposed to excessive heat such as direct sunlight or fire.

| AT FULL. VOLUME, ROLONGED II.ISIEN!IING MAY DAMIAGE THE USE1R’S HEARIING.
---|---
| |
---|---|---
This warning sign is to warn of dangerous voltage inside the product.| CAUTION : To reduce the risk of
electric shock,  DO NOT remove the
cover (or back). No user serviceable  parts, inside. Refer servicing to qualified service personnel.| This warning is to alert you of important instruction accompanying the product.

WHAT’S INCLUDED

| | |
---|---|---|---
User Manual| Power Cable| HDMI Cable| USB-C

DISCLAIMER

Features and settings with their respective terms and images may be subject to change;  thus there may be slight differences between the manual and the product.

CONNECTIONS AVAILABLE ON THE MONITOR

1.2
3.| USB-C| Used to connect a compatible device. Supports PD65W charging
4.| Audio out port| Used for connecting headphones or external speakers

The terms HDMI, HDMI High Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of  HDMI Licensing Administrator, Inc.

GETTING STARTED

**MONITOR CONTROLS

**

INITIAL SETUP

Connect the monitor to a power outlet.

1. Press the POWER button on the monitor to turn it on (The indicator will be blue)
2. Connect the relevant cable to the corresponding input on the monitor. The source will be automatically detected.
3. To change between inputs, press the EXIT button to enter the source menu. Use the ◄ and ► buttons to choose the input source between HDMI, DP and Type C.

MENU OPTIONS

The menu for the monitor can be accessed by pressing the MENU button on the control panel. This menu is separated into the following sub menus: Backlight, Image, Color, OSD Settings, Reset and Miscellaneous (Misc.); details of each menu can be found in the following section.

PLEASE NOTE:
Some settings may not be adjustable in which case they will be grayed out. This could be due to the input source or other options chosen within the menus.

BACKLIGHT

BRIGHTNESS
Allows the adjustment of the image brightness, according to ambient light in the room. Value “0-100”.

CONTRAST
Allows the adjustment of the image brightness, according to ambient light in the room. Value “0-100”.

LOW BLUE LIGHT
Allows adjustment of the low blue light of the OSD, value “0-100”.

PROFILE
Allows selection of image profiles between the following: STANDARD, TEXT, MOVIE, GAME.

DCR
Allows the dynamic contrast of the picture to be turned ON and OFF.

FLICKER FREE
Allows the flicker-free technology to be turned ON and OFF.

IMAGE

ASPECT
Allows selection of video format of the between “WIDE, 4:3”.

COLOR

COLOR TEMP.
Allows adjustment of the colour settings between the following options: Normal – Warm – Cool – User – 7500K – 5800K – SRGB.

RED
Allows adjustment of the red element of the image.

GREEN

Allows adjustment of the green element of the image.

BLUE
Allows adjustment of the blue element of the image.

OSD SETTINGS

LANGUAGE
Allows selection of desired language: ENGLISH, FRENCH, TURKISH, ITALIAN, SPANISH, PORTUGUESE, CHINESE, DUTCH, JAPANESE, GERMAN, POLISH, AND KOREAN.

CSD H. PCS
Allows adjustment of the horizontal position of the OSD.

CSD V. PCS
Allows adjustment of the vertical position of the OSD.

CSD TIMER
Allows adjustment of the duration of the OSD, value “5-100”.

TRANSPARENCY
Allows adjustment of the transparency of the OSD, value “0-100”.

RESET

RESET
Returns the monitor to its factory default settings.

OTHER

SOURCE
Allows user to choose the signal source of the display “HDMI, DP and USB C “.

MUTE
Allows Mute to be turned ON and OFF.

VOLUME
Allows adjustment of the volume of the monitor from “0-100”.

G-SYNC
Allows G-SYNC to be turned ON and OFF.

HDR MODE
Allows HDR Mode to be turned ON and OFF. Available when HDMI port connected.

SPECIFICATION

Cables
Power Cable| Yes
HDMI Cable| Yes
USB-C Cable| Yes
Functions
G-SYNC| Yes
Power Consumption| 27W
Power Type| AC 100~24ov so/60Hz

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>