DOOSAN SD310 Wheel Loader Owner’s Manual
- June 3, 2024
- DOOSAN
Table of Contents
DOOSAN SD310 Wheel Loader
Specification
|
---|---
Overall working weight Capacity heaped ISO/SAE
Rated load Max traction force Max breakout force (kN)
Max gradeability
Dump height (at 45º) 1) (at fully raised)
Dump reach (at 45º) 1) (at fully raised)
Overall dimension(LxWxH)
| kg lb m3 yd3 kg Ton kN lbf
Degree mm
ft in mm ft in mm
| 17,300 38,140 3.0 .9 5000 17 161 36,194 30 3085 10’1″ 1,297 4’2″
8260×2992×3450| Front and Rear Axles|
Final decelerate type| | FULLY FLOATING PLANETARY-TYPE HUB DRIVE FIXED
MOUNTING(FRONT) TRUNNION MOUNTING(REAR) PLANETARY|
Tyre|
Tyre specification Front tyre pressure Rear type pressure| ****
Mpa Mpa
| 23.5 -25-16PR
0.38
0.34
|
Steering System|
Type
Steering angle Min. turning radius (outside tires) Min. turning radius (outside bucket)
| ****
degree mm fin mufti in
| Gear 40 5800 19’0″ 6510 21’4″|
Engine|
Model Type
Number of cylinder Bore/stroke (mm) Max torque Rated power Rated speed Min
fuel consume ratio| | Doosan DE08TIS (TIER-II Certified) TURBO, DIRECT
INJECTION 6 111 X 139 (mm) 902 N.m/1300 rpm 160kW(215HP)/2,000 rpm 2000 rpm
215 g/kw.h @ RATED SPEED|
Hydraulic system|
System working pressure Boom lifting(full load) Total time| bar sec sec| 170
< ~ 6.0
< ~ 11.3
|
Brake system|
Transmission system|
Service brake Parking brake| | AIR PUSH HYDRAULIC SINGLE LINE
SPRING-APPLIED AIR RELEASED DRUM BRAKE|
Torque converter type
Torque ratio Transmission type
Gear shift Max speed| ****
km/h
| Single Stage, Single phase, Three elements(single turbine) 2.142 4 SPEEDS,
POWER-SHIFT, COUNTERSHAFT 4 forward shift , 3 back 38.0 KPH|
Fill capacity|
Fuel Hydraulic oil| liter liter| 330 177|
Dimension
Dimension
A. Height to top of cab and canopy
B. Ground clearance
C. Machine center point to rear axle
D. Wheel base
E. Overall length ****
F. MAX. TILT ANGLE (fully raised)
G. Bucket dump at full height
H. Dump reach (at 45º) 1) (at fully raised)
I. Maximum overall height
J. Hinge pin height at full lift
| mm ft in mm ft in
mm ft in mm ft in
degree degree mm
ft in mm mm ft in
| 3450
11’3″
420
1’37”
1600
3200
10’6″
8260
27’1″
60.5
49
1297
4’2″
5713
4150
13’7″
| K. Dump height (at 45º) 1) (at fully raised)
L. Maximum rollback at ground Max. tilt angle at ground
M. Hinge pin height at carry position
N. Maximum digging depth
O. width over tires
P. Tread width
Q. turning radius outside tires
R. Maximum steering angle (each side)
S. Bucket width
T. Turning radius outside bucket| mm ft in
degree mm mm ft in mm ft in mm ft in mm ft in
degree mm
ft in mm ft in
| 3085
10’1″
45
500
120
5″
2750
9’2″
2150
7’0″
5800
19’0″
40
2992
9’9″
6510
21’4″
New Operator Panel
The instrument panel has been changed to improve operator comfort and convenience.
Doosan DE08 TIS engine
fuel saving and environment friendly low-speed engine, satisfying Tier-II
emission standards.
Our many years of experience in engine design and production have resulted in
the emergence of a highly efficient and very powerful engine that boasts the
highest power in its class.
Rearward Visual Fie ld broadened by 20%
The rear end of the device adopts streamline design which largely broadens the
rearward visual field of the operator, improving not only the work efficiency
but also safety.
Excellent Performance for The Best Job
SD310 features powerful performance under poor working conditions with high efficiency and fuel saving operation. Well integrated high quality main components make it possible.
Fas t Ope rating Speed
Significantly improved work progress, reduced work time, and reached excellent
perfectly balanced for optimal work efficiency.
Quickly Changeable Brake Disc Brake disc can be replaced quickly and easily without disassembling tires, deeply shortening the maintenance time and saving time and labor cost.
High Efficiency Cooling Fan
The cooling fan of non-isometric blades can reduce noise and increase air
flow.
Easy and Quick Adjus table Maintenance Window
The 180°side-opened maintenance window provides a quick and direct view for
inspection, largely saving daily monitoring and maintenance time.
Tippling load
Tipping load of Doosan equipment greater than products from competitors for
realizing stable digging work.
Strong Breakout Force
Released through the best combination of hydraulic systems, under any working
conditions, to create outstanding results.
Tropical radiator applied to SD310 for allowing operation in tropical zones such as deserts in the Middle East, and keeping its performance high.
Traction force
Traction force far more excellent than products from competitors allowing
exercise of powerful force during operation.
DISD in hous e axle
Axles developed by DISD proven of high quality and durability.
In-house axle allowing rapid and stable part supply. (SD310)
Air Flow Increas ed by 30%
Excellent air-conditioning system and air circulation function as well as
perfect defrost system provide operator a more comfortable operating
environment and more easy controlling methods to benefit from the above
functions.
Cabin
- Enough space.
- Wide visual field.
- Noise inside cabin is lower than comparative units.
- Comfortable operating space.
- Multi-angle adjustable steering wheel.
Air Flow Increas ed by 30%
Excellent air-conditioning system and air circulation function as well as
perfect defrost system provide operator a more comfortable operating
environment and more easy controlling methods to benefit from the above
functions.
Lower Noise
Offering a quiet and comfortable working environment and improving efficiency.
(SD310 – Indoor noise levels : 81dB, The noise level of the equipment outside
: 112dB)
ZF transmission
Full automatic transmission for streamlined speed change with four forward
gears and three backward gears.(SD310)
Features of DISD wheel loader
- Stronger breakout force and tractive force, reflecting excellent performance in a high-load working environment.
- Ideal operating speed and 40ºsteering angle, sharply improving work efficiency.
- Low-speed engine, saving more fuel for the device.
- Reasonable matched top-end technology, ensuring a more reliable, durable and efficient device.
- Noise reduction technology in line with international standards, providing operator with physical and mental protection, while bolstering work efficiency.
- Industry leading cooling system, offering a guarantee for continuous and uninterrupted work under high temperatures.
- Streamlined appearance and wide operating room, representing an international brand style.
Aluminum Radiator
Aluminum radiator is stronger and better in quality than copper radiator.
Aluminum radiator enhances reliability of the machines
- No electric fan motor for air conditioning condenser.
- Air conditioning condenser is integrated with radiator assembly and has less quality problems caused by electric fan motor.
Full Tilting of Engine Cover
With this one body engine cover, it is easy to repair engine and sub parts.
Inspection for High/ Low Hydraulic Oil Level
Used to monitor the hydraulic oil level more easily to reduce maintenance
time, improving device service lifetime.
Outdoor Power switch Used to cut off battery power when necessary to enhance maintenance safety and convenience while protecting the battery and extending battery life when the device is parked for a long time. (SD310, SD300, SD200)
Solid Frame Structure
The most advanced 3D CAD and FEM technologies are adopted in the analysis of
technical design, greatly improving the strength, durability and reliability
of the device.
Transmission Shaft :
Double Bearing Drive Shaft
- Double bearing supporting propeller shaft in dual configuration for improving reliability of propeller shaft.
- Lubricating oil can be infused easily, enhancing the durability of the transmission shaft.
Rear Lamp
Embedded in count weight and protected from ext..