Hatch 103S 4G Tablet PC User Manual

Hatch 103S 4G Tablet PC

Important safety instructions

• This equipment should be used in an environment where the ambient tempera­ture is between 5 ° C (41 ° F) and 35 ° C (95 ° F).

• Do not expose the unit to rain or moisture and keep it away from liquids. In case of splashing water or other liquid on the device, switch off the device immediate­ly and wait for it to be completely dry before turning it on again.

• Do not expose the device to direct sunlight.

• Do not use strong solvents, liquid detergents, or other chemicals on or near the surface of the machine to prevent corrosion or damage to the surface of the machine.

• Do not expose the unit to a dusty environment.

• Do not use the appliance during a gas leak.

• Do not expose the unit to strong magnetic or electric fields.

• You can route the device to airport X-ray detectors. However, it is recommended that you do not route your device through magnetic sensing gantries or expose it to portable detectors.

• Do not place objects on the device.

• Do not place the device on an uneven or unstable surface.

• Be sure to protect the device from falling or other shock that may damage it.

• Do not leave the device on or in charge on the knees or other body parts to avoid the risk of heat-related injury.

• Switch off the appliance before transporting it or covering it with a material that does not allow for optimal air circulation.

• Do not use power cords, accessories, or other damaged devices with your device.
  We recommend the exclusive use of accessories (power supply, cables … ) supplied with the device.

• Use only original batteries. Replacing the battery with an incorrect battery may result in a risk of explosion.

• Do not disassemble, modify, or repair the unit yourself, as this may void the warranty.

• Please save your important content regularly to avoid data loss.

• Our company rejects any resposability in the event of loss or deletion of items contained in the device due to improper use of the hardware or software, lack of maintenance or any other accidental event.

WARNING
NOTICE RISKOF ELECTRIC SHOCK. DONOT OPEN.
CAUTION : TO AVOIDTHE RISK OF FIRE AND SHOCK ELECTRICAL, DO NOT REMOVE COVER OR HOOD BACK OF PRODUCT. IFTHE UNIT MUST BE REPAIRED, ADDRESS EXCLUSIVELY QUALIFIED PERSONNEL.

• The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of an uninsulated “dangerous test’ inside the product, which is of sufficient magnitude to constitute risk of electric shock.
• In the documentation supplied with the device, the exclamation point within an equilateral triangle is intended to alert the user to the presence of important instructions regarding use and maintenance.
• At full volume, prolonged listening to the portable audio device can damage the user’s hearing.

Package contents

Presentation of the device

Getting started

Charge the battery of your device

Connect the AC adapter to a grounded electrical outlet.

Note : Charge your TazTag device before using it for the first time .

WARNINGG!

Read the following instructions carefully about the battery of your TazTag device:

• Only a technician authorized by TazTag is allowed to remove and handle the battery
• The battery in your TazTag device may present a fire or burn hazard if removed or disassembled
• Respect the information on the warning labels of the device to avoid any risk of injury
• There is a risk of explosion if the battery is replaced by an incorrect model
• Do not dispose of the battery ina fire
• Do not attempt to short-circuit the TazTag battery.
• Do not attempt to disassemble the battery or reassemble the battery
• Stop using the battery if it is leaking
• The battery and its components must be recycled or disposed of properly.
• Keep the battery and its components out of reach of children

Turn on/turn off your device

Turn on your device by pressing and holding the power button.

Turn off your device:

• Open the Start menu
• Press the Stop button.

FCC

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: ( 1) This device may not cause harmful interference, and (2) this device must accept any interterence received, including intertference that may cause undesired operation.

Information to the user

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 15.105 Information for the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connecting the equipment to a socket on a circuit different from that to which the receiver is connected.
• Contact with the provider or a radio fTV technician for help.

Specific absorption rate (SAR):

This Tablet PC meets the government’s requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a margin of safety designed to ensure the safety of all people regardless of their age or health. The FCC Statement of Exposure to RF and the SAR limit for the United States (FCC) is 1.6 W/kg average for each gram of tissue. This device was tested for typical operations of use on the body, with the back of the Tablet PC at Omm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a distance of Omm between the user’s body and the back of the Tablet PC. The use of belt clips, covers and similar accessories must not contain metallic components in their assembly. The use of accessories that do not meet these requirements may not meet FCC RF exposure requirements and should be avoided.

Functioning in the body

This device was tested for typical operations of use in the body. To comply with RF exposure requirements, a minimum separation distance of Omm must be maintained between the user’s body and the telephone, including the antenna. Third-party accessories such as belt clips. covers and similar accessories used with this device should not contain metallic components, accessories that do not meet these RF exposure requirements and should be avoided from use on the body. Use only the supplied antenna or an approved antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>