Hatch Baby RESTORE04 Smart Sound Machine Alarm Clock User Guide

**Hatch Baby RESTORE04 Smart Sound Machine Alarm Clock User Guide

**

INSTRUCTIONS

Step 1

Connect the power cable to Restore then plug it into your power outlet. Always keep your device plugged in.

Step 2

Download the Hatch Sleep app on your phone or tablet from the Apple App or Google Play store.

Step 3

Complete the steps in the Hatch Sleep app to connect your Restore. Wi-Fi is required.

Controls

Rest Button

• Press when you’re ready to rest.
• Press again to move to the next step.
• Press and hold to stop.
  

Rise Button

• Press when you’re ready to rise.
• Press again to move to the next step.
• Press and hold to stop.
  

Alarm Toggle

Slide the alarm toggle to the left to disable your alarm.  Slide right to enable again.

Volume

Tap the lower right and left corners to adjust the volume.

Brightness

Tap above and below the clock display to adjust the brightness of the main light.

Tap for the time

When the clock display is hidden, gently tap Restore anywhere to check the time

Clock Brightness

You can adjust the brightness of the clock display in the Hatch app settings.

Alarm Snooze

Press either the Rest or Rise button to snooze your alarm. Press and hold to stop the alarm.

Hatch support is a dream

Contact us at hatch.co/support

Follow @hatchforsleep and see what dreams are made of.

FCC Caution

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency ener gyand, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

ISEDC Warning This device complies with Innovation, Science, and Economic
Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions;

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>