HATCH RESTORE03 Smart Light and Sleep Sounds User Guide
- June 5, 2024
- Hatch
Table of Contents
Let’s Set You Up For Great Sleep
Step 1
Plug in Hatch Restore
Connect your power cable then plug it into your power outlet. Always keep your device plugged in.
Step 2
Download the Hatch Sleep app
Download the app on your phone or tablet to create an account.
Step 3
Complete Setup
Follow the steps in the Hatch Sleep app to connect your device. Wi-Fi is required.
Top Button
Turn On: Tap top button.
Turn Off: Press & hold top button.
Skip: Tap to skip through your routine steps.
Side Controls
Right: Tap to increase or decrease brightness.
Left: Tap to increase or decrease volume.
Alarm Controls
1. Press to
check alarm time.
2. Press to turn all alarms on and off.
Quick Tips
Alarm
The dot next to the time indicates your alarm is on. Use the app or the alarm
button on the back of Restore to turn your alarm on or off.
Wish to snooze? Tap the top of Restore for another 9 mins!
Clock Brightness
Dim or turn off the clock in the app.
Visit Clock Display under Settings.
Need help?
Hatch support is a dream.
Contact us at support@hatch.co.
Follow @hatchforsleep and see what dreams are made of.
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
ISEDC Warning This device complies with Innovation, Science, and Economic
Development Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of
the device.
The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance.
FCC ID: 2AFYZ-RESTORE03 / IC: 23920-RESTORE03
Documents / Resources
|
HATCH RESTORE03 Smart Light and Sleep
Sounds
[pdf] User Guide
RESTORE03, 2AFYZ-RESTORE03, 2AFYZRESTORE03, RESTORE03, Smart Light and Sleep
Sounds
---|---