RELA NOW VTX100 Standing fan User Manual

: June 3, 2024
: RELA NOW

Table of Contents

RELA NOW VTX100 Standing fan
TECHNICAL SPECIFICATIONS
PARTS LIST
GENERAL INFORMATION
ASSEMBLY INSTRUCTIONS
INSTRUCTIONS
GETTING STARTED
OPERATING INSTRUCTIONS
CLEANING AND STORAGE
- Maintenance
DISPOSAL
Distributed by
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RELA NOW VTX100 Standing fan

RELA-NOW-VTX100-Standing-fan-product-removebg-preview

Our video tutorials for you

YOUTUBE

3 simple steps for a fast and safe start: assembly use disassembly

scan the QR code
watch videos
start fast and safely

https://service.innovamaxx.de/vtx100_video

TECHNICAL SPECIFICATIONS

16“ floor fan
Power: 45 W
Dimensions: 43 x 40 x 130cm
Net weight: 4.7 Kg
Voltage: 220-240V ~, 50Hz
3 speed levels
3 propeller blades
70 ° right and left oscillation
Adjustable size
Safe and reliable
Strong round rack
Covered Delivery: fan, operating instructions

PARTS LIST

At the following link you will find the exploded drawing and the spare parts list: https://service.innovamaxx.de/vtx100_spareparts

GENERAL INFORMATION

Please read this operating manual carefully before using the device and keep the manual in a safe place. Use the device only as instructed and familiarize yourself with all the operational and user aspects of the product. Familiarize yourself with the safety instructions. Remove the packaging and check that the product is undamaged. If there is doubt that the product is undamaged, do not use the product and contact your company or the seller.

Do not let children play with parts of the packaging (e.g. plastic bags).
When installing or removing the fan, it must not be connected to a power outlet
Before unplugging the power cord, turn off the fan.
Do not insert objects into the protective grille. THIS CAN LEAD TO SERIOUS INJURY
The fan is intended for standard rooms. Do not use it in dusty areas and areas of high humidity. Keep the fan away from any acid and alkaline.
Do not hang clothing over the fan.
Do not use the fan outside.
Do not leave the fan directly blowing towards a baby for an extended period of time, or any unwell person.
This product is not for unsupervised use by children or suitable for frail people.
Young children should not be left alone with the product.
This product is not suitable for the use of persons (children included) with reduced physical, sensory or mental abilities or lack of experience unless it is under supervision of, or on the specific instructions of, a responsible supervisor.

WARNINGS

This product is for personal use only.
Any maintenance beyond standard care of the product should be performed by an authorized professional
Do not immerse the device in water.
Do not remove any parts and do not remove the wiring or tamper with the electrical system to avoid the risk of fire or electric shock.
The product should only be repaired by an authorized specialist.
If the power system of this unit is damaged, it must be replaced by the manufacturer or the responsible customer service provider or a similarly qualified person in order to avoid hazards.

ASSEMBLY INSTRUCTIONS

Installation and use

Mount and connect the socket unit with the support tube. Open the case and remove the socket.
Then assemble the tubes, the larger tube being the bottom tube and the smaller tube connecting to the switch unit. Align the four holes in the tubes and tighten the screws. Slide on the decorative cover. Place the base next to the support tube and secure the support tube to the base unit. Then tighten the outer joint.
Mount propeller:
Connect the protective cover and the cover ring and attach the rear cover to the engine. (Observe the direction of rotation) Lay the connection of the cover ring down and connect the deep screw of the cover ring with the circular side ring of the rear side of the unit. Then tighten the screws for the correct position of the connection with the nut.
Install the propeller
When installing the propeller, please use the wedge screw on the back of the clamp of the propeller and connect to the bolt of the output shaft of the motor. Then tighten the mounting nut of the propeller in an anticlockwise direction.
Put the front cover together
Insert the circle of the front cover into the screw of the cover ring which is attached to the rear cover. Finally, tighten the screw into the ring joint.

INSTRUCTIONS

Adjust the wind direction
This fan can move up and down. The angle can be adjusted up or down by gently lifting or pushing the cover.
Adjust the rotation
To control the rotation of the fan, press the knob on the head of the fan to start the rotation of the fan and then pull it up to stop the rotation.
Adjustment of wind speed and wind type
Pressing the wind speed button will adjust the wind speed.

Simple troubleshooting

If the propeller does not work when starting the fan then please check if the mains plug is really plugged into the socket or if the cover is warped and touching the propeller. If you hear a noise when starting the fan, check for the following Points:

The propeller is securely installed in the output shaft of the engine.
The groove on the back of the cover matches the insertion groove on the output shaft, i.e. the grooves must line up.
There is a small broken edge ring around the propeller.
The cover has warped and is in contact with the propeller.

GETTING STARTED

Electrical connection

Before plugging the plug into the socket, make sure that the voltage of your main supply complies with the voltage on the label of the product
Only connect the fan to a correctly installed socket.

OPERATING INSTRUCTIONS

Speed control
- Turn the ring switch to control the draft
Tilt
- For safety reasons, make sure the fan is off.
- Hold the stand with one hand and move the guard gently up or down.
Oscillation
- Push down the oscillation button on top of the fan to make it rotate
- Pull the oscillation button up to stop the rotation.

CLEANING AND STORAGE

Before you clean the fan, it is important to be sure that the device is turned off and the fan is not connected to any electrical supply or socket.

Maintenance

Please note

Do not allow water to get into the engine during cleaning. Clean the propeller and the guards with a soft, damp cloth and then dry them.
Do not use thinner, alcohol or any other chemical to clean the fan.

Storage: Apply a few drops of lubricant to the motor shaft to prevent corrosion.Remove any excess oil and stains from the body to prevent any damage to the fan.Take the fan apart according to the assembly instructions in reverse order, put it back in the box and store it in a dry place.

DISPOSAL

Dear customers

As an end user, you are legally obliged to collect waste electrical and electronic equipment and batteries as well as accumulators separately from municipal waste. We want to make this as easy as possible for you. Please note the information on this page and on the back.

Notes on EU directive 2012/19/EU (in Germany implemented in ElektroG (Law about electric and electronic devices); elsewhere implementation may differ)

We advise owners of electric and electronic equipment that waste electrical and electronic equipment must be collected separately from municipal waste in accordance with the applicable legal regulations. The symbol of a crossed-out garbage can, which is shown on waste electrical and electronic equipment, also indicates the obligation to collect this waste separately.

Notes on disposal and symbols for an electrical appliance based on EU Directive 2006/66/EU (in Germany in accordance with the Battery Act (BattG); elsewhere, an implementation may differ)

Old batteries and accumulators must not be disposed of with household waste. As an end user, you are legally obliged to return used batteries. The symbol with the crossed-out garbage can means that you are not allowed to dispose of old batteries in the household waste. Use the official collection points for this, such as the collection points of public waste disposal carriers. You can also return used batteries to retail outlets, provided they sell batteries. If the symbol Cd, Hg, or Pb is displayed under the symbol of the crossed-out garbage can, this is an indication that the battery contains either cadmium, mercury or lead. These are toxic heavy metals that not only pose significant risks to the environment but also to human health.

Recycling loop

Packaging material can be conveyed back to the raw material cycle. Dispose of packaging material in accordance with legal provisions. Information can be retrieved from the return or collections systems of your community.