RELA NOW VTX300 Super Quiet Floor Fan with 45 W Power Motor User Manual

RELA NOW VTX300 Super Quiet Floor Fan with 45 W Power Motor

Dear customer,
We are pleased you chose a device from the RELAXXNOW product range. With equipment from RELAXXNOW you get high quality and new technology.
In order to fully use the potential of your device and be able to enjoy it for many years, please read this manual carefully before starting up and beginning of training, and use the device according to the instructions. The operational safety and function of the device can only be guaranteed if the safety instructions in this user manual are observed. We shall not assume any liability for damages resulting from improper use or incorrect operation.

• Make sure that ALL persons using the device have read and understood this user manual. Keep this manual close to the device.
• Adhere to ALL Safety Advices in this manual.
• NEVER overexert yourself or others when using the de-vice.

Our video tutorials for you!

3 simple steps for a fast and safe start:

1. scan the QR code
2. watch videos
3. start fast and safely

Link to the videos: https://service.innovamaxx.de/vtx300_video

TECHNICAL SPECIFICATIONS

• 16“pedestal fan
• Power: 55W
• Dimensions: 46.5 43.5 124CM Net weight: 5.3kg
• Voltage: 220-240V ~, 50Hz
• 5 strong and low noise propeller blades
• 120 ° angle horizontal oscillation
• 4 speed levels: Eco / Low / Medium and High Spee
• 7.5 h Digital Timer
• With Remote Control
• With WiFI
• Head of the fan can be manually tilted upwards (max 90 °).
• Luxury all-plastic casing with patent locker system, easy assembly and disassembly, no tools needed.
• Weighted round base, easy to mount stand tube.

Delivery contents:

• 1x VTX300 fan
• 1x remote control
• 1x User Manual

GENERAL INFORMATION

Please read these operating instructions carefully before using the device and keep them in a safe place. Only use the device as described and familiarize yourself with all operating and safety instructions before using the product. Remove the packaging and check if the product is undamaged. If in doubt, do not use the product and contact your supplier.

• Never insert foreign objects such as fingers, pins, etc. through the protective grille while the appliance is in operation.
• Disconnect the device from power if you want to adjust or clean it.
• Make sure that the device is placed on a stable, level surface when it is in use so that it does not tip over.
• DO NOT place the unit near a window. Rain can cause an electric shock. Do not immer-se the device, the plug or the cable in water and do not spray it with liquids.
• Do not leave children and animals unattended with the device when activated. Do not leave the cord hanging from the table or counter.
• Do not use the device if the cable or plug is damaged, if the device is defective, if the device has fallen down, or has been otherwise compromised. In such cases, contact a qualified electrician.
• Do not use the fan without the pedestal. The device must stand upright during operation.
• Do not use the fan near curtains, plants, window decorations or other things that may get into the propeller. To disconnect it from the power, unplug the plug from the socket. Never pull on the cable.
• Do not lay the cable under a carpet. Do not cover the cable with carpets, runners or similar. Lay the cable so that nobody can trip over it.
• To disconnect the device from the mains, disconnect the plug from the socket. NEVER pull on the mains plug and NEVER pull on the cable.

WARNINGS

• This product is for personal use only.
• Any maintenance beyond standard care of the product should be performed by an authorized professional
• Do not immerse the device in water.
• Do not remove any parts and do not remove the wiring or tamper with the electrical system to avoid the risk of fire or electric shock.
• The product should only be repaired by an authorized specialist.
• If the power system of this unit is damaged, it must be replaced by the manufacturer the responsible customer service provider or a similarly qualified person in order to avoid hazards.

ASSEMBLY INSTRUCTION

Installation and Use
For the table fan
Place the pedestal (15) on a table, insert the adapter (19), and tighten it by turning the adapter (19) clockwise.
2.Put the top pillar (8) onto the connec-tion adapter (19). Tighten the top button of the column (11).

Rotor + Grids

1. Remove and discard the plastic packaging of the motor shaft (6).
2. Guide the rear grill with the handle (5) along the motor shaft (6) against the front of the motor unit (7). Make sure that the handle on the back of the rear grill (5) is facing up and that all the guide pins on the motor unit (7) are aligned with the recesses on the rear grill.
3. Secure the rear gate with handle (5) with the plastic nut (4). To do this, firmly attach the plastic nut (4) to the motor unit by tightening it clockwise
4. Guide the fan blade (3) along the motor shaft (6) against the plastic nut (4). Carefully turn the fan blade (3) into the correct position until the recesses provided for it engage in the plastic nut (4). Now place the turntable (2) on the motor shaft. It is fastened by tightening the turntable (2) counterclockwise.
5. Mount the front grill (1) against the rear grill (5) by aligning the markings on the top according-ly. Now connect both parts using the hooks on the front grill (1) and the slots on the rear grill (5). The snap lock pin should now snap into place.

Note:

To disassemble the front grill, gently pull the snap lock pin outward while rotating the front grill counterclockwise.
Tighten the locking screw to secure the snap lock pin.

GETTING STARTED

Electrical connection

• Before plugging in the plug, make sure that the voltage of your main power supply matches the voltage on the product label.
• Only connect the fan to a properly installed 220-240 V ~ 50/60 Hz socket point.

OPERATING INSTRUCTIONS

This fan is equipped with 4 speed settings, a timer and a remote control. The buttons on the main product have the same function as those on the remote control.

IMPORTANT :

• Please observe the minimum surrounding distances to walls and objects when installing the device (30cm in ALL directions).
• Before startup, check the condition of the power cord. If in doubt about the condition, contact the manufacturer.
• Position the device in an upright AND stable position.
• Avoid laying the power cord (when positioning in the center of the room). Avoid the cable beng a „tripping hazard“ of any kind. We recommend the use of cable bridges/covers.
• Make sure the power cord is fully unrolled.
• Make sure that possible objects (such as curtains, clothing, etc.) do not obstruct the airflow.
• Insert the batteries into the remote control. If the batteries are already inserted into the remote control ex works, you must remove the protective foil.

| With this control, the fan is guided through 4 comfort speeds (High / Medium / Low / Eco). The speed button can be used in any mode.| These icons show the selected speed levels:

Low Medium High      Eco

Speed|  |
 |  | To activate a wide breeze distribution, press this oscillation button once.

The W-Lan function is activated after the button has been pressed for three seconds.

| The oscillating light on the fan lights when the function is activated. To turn it off again, press this button again. The oscillation can be controlled while the fan is operating.

 |

3 sec.

Oscillation

|

Power ON/OFF

| With this button you can turn the fan on and off.|

Operating the Remote Control
Operation is subject to the following two conditions: (1) This device does not encounter transmission interference, and (2) this device necessarily picks up any interference, including interference that may result in the compromised performance of the device. To facilitate operation, the remote control has the same buttons as the control switch. Follow the same instructions as per the operating instructions.
Note: Remove the plastic insulation tab under the battery before using the remote control.

• The remote control must be pointed at the receiver on the fan in order to work.
• The range of the remote control is 5 meters. If the remote control is not aimed at the receiver, the range will be reduced.
• The remote control should not be used in rooms where heavy machinery is in operation.
• The line of sight between the remote control and the receiver must not be blocked.
• Carefully handle the remote control. Do not drop it and do not collide it against hard objects.

Guidelines for Using the Batteries of the Remote Control

• If the remote control will not be used for an extended period of time, remove the batteries from the remote control.
• Clean the battery contacts and the device before putting the battery in the remote control.
• Make sure that the batteries are inserted correctly, especially with regard to polarity, by adjusting the +/- sides of the battery to the corresponding indicators on the remote control.
• Remove used and damaged / discharged batteries immediately.

Adjustments for Improved Air Circulation
This fan has two functions that allow you to better adjust the air comfort and improve the air circulation in the room.

• A. Oscillation:
  To activate the oscillation function for larger air distribution, press the button. To deactivate the function for a specific wind speed adjustment, press again. The control of the oscillation can be performed while the fan is operating. This fan has improved wide-angle vibration for better circulation.

• B. Tilt:
  To adjust the head of the fan to a specific angle, switch off the fan and hold the motor unit with one hand. Grab the protective grille with your other hand. Carefully tilt the head of the fan until it reaches the desired angle. Do not tilt the head further than intended, as this may damage the device. To a maximum, it can be tilted almost to a horizontal position

Note: The fan must be switched off if you make this adjustment

SPECIFICATIONS

CAUTION: To avoid electric shock, adjust the wide edge of the connector to the wide slot. Plug it fully and snuggly into the socket.

APP FUNCTION

Note: This app is only supported by 2.4Hz WiFi network. Please make sure that your mobile phone is connected to a 2.4Hz WiFi network.

• Step 1 – Download the app:
  Search and download „Tuya Smart“ in a large application market.

• Step 2 – Registration:
  After downloading the app, open the app and register as instructed.

• Step 3 – Connect the app to the fan

1. Plug the fan plug into a 220-240V outlet. The fan is in standby mode.
2. Press „Add Device“ or „+“ in the upper right corner on the home page of the app as shown below.
3. Press „Small Home Appliances“ and „Fan“ as shown in the picture below.![RELA-NOW-VTX300-Super-Quiet-Floor-Fan-with-45-W-Power-Motor-fig-13](https://manuals.plus/wp-content/uploads/2022/12/RELA-NOW-VTX300-Super-Quiet-Floor-Fan-with-45-W-Power-Motor-fig-13.png)
4. Press the OSC button on the fan control panel for 5 seconds until the WiFi  indicator on the display starts flashing rapidly. Then press „Confirm indicator rapid blink“ on the mobile phone.  

Note: If the connection fails, press „AP Mode“ (top right) and „Confirm indicator slow blink“ on the mobile phone as shown in the picture below .

5. When your mobile phone displays a connection and the WiFi indicator on the fan stops lighting, the app is connected to the fan.  

If the connection is successful, you can use the app to control the fan.

AMAZON ALEXA

• If you want to use Alexa, press „ME“ (bottom right).
• Then select „More Services“ and then „Alexa“.
• There you will find how to use Alexa.
• To turn the fan on or off, use the voice demand „Alexa, turn the fan on / off“. Alternatively, you can also assign an individual name to your fan via the device settings of the Alexa app, which you can then use for voice control.

CLEANING AND STORAGE

Before you clean the fan, it is important to be sure that the device is turned off and the fan is not connected to any electrical supply or socket.

Maintenance:
Please note:

• Do not allow water to get into the engine during cleaning. Clean the propeller and the guards with a soft, damp cloth and then dry them.
• Do not use thinner, alcohol or any other chemical to clean the fan.

Storage:

• Apply a few drops of lubricant to the motor shaft to prevent corrosion.Remove any excess oil and stains from the body to prevent any damage to the fan.
• Take the fan apart according to the assembly instructions in reverse order, put it back in the box and store it in a dry place.

TROUBLESHOOTING

If the fan stops working, please follow these steps before contacting customer service:

AC, 50/60 Hz

socket.

| Plug it into the appropriate outlet and turn it on again.
The fan has suddenly stopped.| The timer has expired and the fan has switched off automatically.| Check all the timer lights on the control switch are off. If any of the lights are

on, press the timer button until all lights are off.

The oscillation function does not work.| The oscillation function was not switched on| Check the corresponding button for the oscillation function is on. If not, press the button to start the function. This can also be done while the fan is in operation.
The fan is on, but the wind is not strong enough.| There is dust/debris on the back of the fan.| Turn off the fan and pull out the plug. Clean the rear grille with a soft, dry

cloth. Plug in again and turn it back on.

The remote control does not work.| The batteries are too weak.

The remote is too far away from the device. The remote control does not send a signal to the device.

| Follow the operating instructions of the remote control and the guidelines for using the remote control batteries.

 DISPOSAL

Dear customers,
As an end user, you are legally obliged to collect waste electrical and electronic equipment and batteries as well as accumulators separately from municipal waste. We want to make this as easy as possible for you. Please note the information on this page and on the back.
Notes on EU directive 2012/19/EU (in Germany implemented in ElektroG (Law about electric and electronic devices); elsewhere implementation may differ)

We advise owners of electric and electronic equipment that waste electrical and electronic equipment must be collected separately from municipal waste in accordance with the applicable legal regulations. The symbol of a crossed-out garbage can, which is shown on waste electrical and electronic equipment, also indicates the obligation to collect this waste separately.
B. Notes on disposal and symbols for an electrical appliance based on EU Directive 2006/66/EU (in Germany in accordance with the Battery Act (BattG); elsewhere, implementation may differ)
Old batteries and accumulators must not be disposed of with household waste. As an end user, you are legallyobliged to return used batteries. The symbol with the crossed-out garbage can means that you are not allowed to dispose of old batteries in the household waste.
Use the official collection points for this, such as the collection points of public waste disposal carriers. You can also return used batteries to retail outlets, provided they sell batteries. If the symbol Cd, Hg, or Pb is displayed under the symbol of the crossed-out garbage can, this is an indication that the battery contains either cadmium, mercury or lead. These are toxic heavy metals that not only pose significant risks to the environment but also to human health.

Recycling loop Packaging material can be conveyed back to the raw material cycle. Dispose of packaging material in accordance with legal provisions. Information can be retrieved from the return or collections systems of your community.

CONFORMITY
Sportstech Brands Holding GmbH hereby declares that the radio system type is compliant with EU Directive 2014/53 / EU.
The full text of the EU declaration of conformity is available at the following internet address: https://service.innovamaxx.de/vtx300_conformity

Sportstech Brands Holding GmbH
Postdamer Platz 11
D-10785 Berlin
+49 (0)30 220 66 35 20 | Mo-Fr | 09:00 -18:00 Uhr
www.sportstech.de

References

• Ventilator vom Profi kaufen: CasaFan Ventilatoren Online-Shop
• Fitnessgeräte für Zuhause online bestellen | SPORTSTECH
• Entsorgung | SPORTSTECH
• service.innovamaxx.de/vtx300_conformity
• Tutorial & Support
• Take-e-way GmbH | take-e-back | Oops

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>