Paulmann 705.28 MaxLED 1000 LED Strip Instruction Manual
- June 9, 2024
- Paulmann
Table of Contents
Paulmann 705.28 MaxLED 1000 LED Strip
Product Information
- Brand: Paulmann
- Model Number: Not specified
- Safety Instructions: 1, 12, 14, 17, 23, 25, 26, 33, 34
- Energy Rating: A++ to G
- Product Weight: Not specified
- Battery Type: Li-Ion (CR2025, 3V, 150mAH)
- Battery Quantity: 1x
- Driver Power: 50VA (for model 705.28), 75VA (for model 705.29)
- Driver Cord Length: 1.5m (for model 705.28), 3m (for model 705.29)
- Water Protection: IP20 (for model 705.30), IP44 (for other models)
Product Usage Instructions
- Ensure that the product is used in accordance with the safety instructions provided in the user manual.
- Check the energy rating of the product to ensure optimal usage and energy efficiency.
- Identify the type of battery required for the product and ensure that only a CR2025 Li-Ion battery (3V, 150mAH) is used.
- Insert the battery into the product as per the instructions provided in the user manual.
- Connect the driver to the product and plug it into a power source.
- Ensure that the driver cord length matches the model number of the product being used (1.5m for model 705.28 and 3m for model 705.29).
- Ensure that the water protection level matches the model number of the product being used (IP20 for model 705.30 and IP44 for other models).
- Refer to the product user manual for further information on usage and maintenance.
WHAT IS IN THE BOX
INSTALLATION
Light source or (4) operating device can be replaced by end users without permanent damage to the luminaire. (2) Light source or (5) operating device can be replaced by a qualified electrician without permanently damaging the luminaire. (3) Light source or (6) operating device is not replaceable, the luminaire must be replaced.
This product contains a light source with energy efficiency class
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>