SaitaKE STK-7038 Wireless Controller User Manual

SaitaKE STK-7038 Wireless Controller

Overview

N-S Controller Mode

(Power on your N-S Console, then follow the steps to pair and opened your controller.)

Step 1: Find Controliers Option-mage

Y+HOME button power on the gamepad,4 LED lights bink in waiting for the connection to complete.-image3 5-7s later, the controller will connect to the console automatically

Reconnect: Press HOME Button

If your controller was once paired and connected to your N-S console, press the HOME button to rapidly connected next time.

Note: The gamepad support pressing the HOME button to wake up the console under sleep mode. You just need to press the HOME button to finish reconnecting. When one of the following conditions occurs, please reconnect referring to the first time to pair and connect.

1. Upgrade
2. Reset
3. Change the console.

Adjust Vibration Intensity

There are 4 levels of vibration intensity: The Strongest Vibration, Moderate Vibration, The Weakest Vibration, None vibration

1. Please make sure you connect the controller to the switch console.
2. Press 4 buttons (L, ZL, R, and ZR) simultaneously for 5 seconds.
3. Then release the 4 buttons when you feel the vibration.

The vibration mode can be adjusted by repeating the above operations.

Vibration Intensity Indication

Controller Mode & Operation

Sleeping Mode & Reconnect

Sleeping Mode: The controller will tum into sleeping mode automatically without any operation within 5 minutes. Wake up & Reconnect: Press HOME button kong with 3 seconds, the controller will power on and reaonned the device, which connected the last time.

Power Off

Press the HOME button long for 3-5 seconds, the controller will power off with all LED lights off.

Factory Motion Controls Calibration

• Please make sure your controller stays at the power-off status, then put it on a flat surface.
• Press the”B” HOME” 3 buttons simultaneously, the Group A indicators and Group B indicators will flash alternately.(LED1&LED2/ LED3&LED4)
• Press the ” button and 4 LED indicators will flash alternately
• After about 15 seconds, all indicators will turn off, which means the controller finishes calibrating. Calibrate Control Sticks.

Calibrate Control Sticks

if the characters in the games are automatically drifting, please complete the “calibrate motion controls” by following:

•  System Setting-Controller and Sensors-Calibrate Control Sticks
•  Enter calibrate control sticks interface, operate it according to the guide on NS console.

Android Game Controller Mode

1.  Press the X+HOME button to power on the gamepad, LED1+LED 4 will be twinking and wait for pairing.
2. Open the interface of Settings on an android device, open Bluetooth.
3. Scan the devices and get the name of STK-7038 lick the device into Paring and Connect automatically
4. LED1+LED4| indicator will belong on ater connected successfully

Reconnecting:
Long press the HOME button to power on the gamepad, it will connect automatically.

PC Wired Controller Mode

Turbo Auto Function

• Buttons (which are called short function buttons) can be set TURBO/ AUTO: A/ B/ X YI L ZU RI ZR button
• Enable’ Disable the TURBO/AUTO speed function:
• Press the one the function button+TURB0 simultaneously, to enable the Turbo speed function.
• Repeat step1 to enable the AUTO function.
• Repeat Step1 to disable the AUTO function.
• Adjust TURBO speed
• Press the TURBO button simultaneously with the directional button Up/ Down,
• Press the TURBO+Direction UP button to adjust the TURBO to faster.
• Press the TURBO+Direction DOWN button to adjust the TURBO to slower.

Specification

• Product name: Multifunctional gamepad
• Model number. STK -7038
• Product size: 152x115x58mm
• Product weight 220g
• Power supply. built-in 400mAh polymer battery
• Charging interface: Type-
• Game time: 4-8h
• Charging time: 1-1.5H
• Packing: color box
• Package Contents: gamepad, charging cable, instruction manual.

Macro Function

Programmable Buttons: AVBXYL1L2R1IR2Upldownleftiright buttons

Enter the MARCO Mode

Under connection status, press MARCO Button+M1 or M2 (on the backside of the controller) that needs to be programmed, to enter the programming mode, the LED will flash slowly to indicate the programming status;

Press the function keys that need to be set in tum, the programming button will record the time interval of each button (for example press Marco+ M1 to tum on the programming mode, then press the B button, wait 1 second to press the A button, then wait 3 seconds to press the X button, lastly press the M1 key to save and exit after the setting is completed, at this time the functions M1 key is B, 1 second later is A, 3 seconds later is X), each programmable button can be set up to 16 buttons. It can be tested whether the setting is successful on the Console interfaoe “Settings- Controller and Sensor-Check Input Device-Check Keys”

Clear MARCO function:

Under connection status, press Marco Button+ M1 or M2 (on the backside of controller that needs to be dleared, the LED will flash slowly. Press the Back button again to dear the record;

Clear all MARCO functions:
Under connection status, press MARCO Button long to wait for the LED1,2,34 flashes slowly, then dear all the programming records.

Update

If there is a problem with the connection while the console update, we can offer the update method as follows:

You can download the “Keylinker” app from google play or the apple store, then install it on your cellphone; follow the step to update your controller.

FCC Information and Copyright

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. 15.19 Labelling requirements.
• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC RF warning statement: the device has been evaluated to meet general RF exposure requirements, The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>