xiaomi Smart Safe OX User Manual
- June 3, 2024
- Xiaomi
Table of Contents
USER MANUAL
Smart Safe OX
What’s Included
Smart Safe OX x 1
M6 Screw Driver×1 Reset Tool×1
M6 Wall-Mount Screw×2 Embedding Screw×2
Mechanical Key × 1
Specification
Model OX
Material Galvanized steel
Battery 4×AA Battery
Unlock Mechanism Bluetooth, PIN Code, App, Mechanical Key
Features
Lock&Unlock
Administrator Unlock
Set a Master Administrator PIN for Unlocking, settings, operations etc. And
only the administrator could change the administrator PIN code.
User Unlock
This Smart Safe allows to add up to 200 user PIN codes for your family and
friends.
Mobile Control
Bluetooth one-touch unlock
With your Mobile you could unlock the Safe by tapping the “ ” on the App.
Mobile Administrator
Set Administrator PIN Codes from your Mobile to unlock, add users, delete
users, etc.
Remote Sharing
You could generate offline code through mobile App and let your friends and
family access the Safe.
Battery
Battery Life
The battery lifetime will be 12 months for operating.
Low Consumption
BLE broadcasting turns to sleep mode if no operations.
Low Battery
When the battery runs out of power, system will remind you to replace the
batteries.
Burglar Alarm
The alarm will be activated if anyone move the Safe, and the High decibel buzzer will be turned on and keep beeping.
Emergency
Emergency Unlocked
When the power is down, we can use Mechanical Key to open the Safe.
System Lockdown
The lock will be lockdown for 5 minutes if continuously enter wrong PINs for 5
times.
Installation
. Please use the 2 wall mounting screws to fix the safe on your wall or cabinet.
Quick Start
Step 1>Install Battery
. Put 4 × AA Battery into the battery dock.
Step 2>Download Mobile App
1. Scan QR Code below and download the App and turn on your mobile Bluetooth
Step 3>Add Device
1. Go to App Home page, click “Add Device” or click “+” on the upper right.
2. Tap + 9 + + admin code + , when you see the light slowly blinks in blue then you are ready to pair
3. You will see the detected device and click “Go to add”.
4. Connecting, you need to wait for a few seconds to let it finish.
5. Device added
Step 4>Change Admin Password-Initial Admin Password:123456
1. Tap and hold for 3 seconds and release, you will be hearing 2 quick beeps.
2. Right after the 2 beeps please key in:
Initial admin code+ + new admin code+ +new admin code again+ , when you hear a long beep with green light the admin code has been changed.
Mechanical Instructions
Password & Factory Mode:
1. Password Length
Password must be 6 digits (no more or less)
2. Add User Password
Tap + 0 + until the blue light blinks
. Enter admin password +
. Enter new user password +
. Enter new user password again and press
. When the (Enter button) blinks in green, user password has been set.
3. Delete Password
Tap + 2 + until the blue light blinks
. Enter admin password and press
. Enter the user password you wish to delete and press
. Enter the user password again and press
. When the (Enter button) blinks in green the password has been deleted.
4. Delete All Passwords
Tap + 00000 + until the blue light blinks
. Enter admin password and press
. When the (Enter button) blinks in green, all user passwords have been deleted.
5. System Lock-down
The Smart Safe will Lock-down for 5 minutes if entering wrong password
continuously 5 times.
6. Virtual digits-Anti Peeping
Add any digits before and after the correct password the Safe unlock as
always.
7. Reset Factory Mode
Use the reset tool press and hold the reset button for 5 seconds until a long
beep.
Bluetooth broadcasting & re-connecting:
Bluetooth will turn to sleep mode and lights out if no operations within 1
minute.
Tap any key to activate the Bluetooth, App&Device will get reconnected each
other.
App Instructions
You will see all devices and rooms on the home page.
Tap the Device to start operating.
Tap “Me” at the bottom to manage your home.
Touch the lock sign to unlock and lock.
Tap to check the alarm records.
Tap “Members” to add or delete members.
Tap “Opening Logs” to check opening logs.
Tap “Intelligent Linkage” to turn on and off go home mode.
Tap “Setting” to manage passwords.
Tap “Get dynamic code” to get a code.
Tap “Copy Code” and send it to friend or family.
Tap to edit your personal information.
Tap “+” to add family member or others.
Tap added members to edit member’s information.
You will find out when and whom opened the Safe.
Tap the green bar and save to turn on the function.
Tap the orange bar and save to turn on the function.
You will get notification if user unlocked with Bluetooth
Go to “Me” homepage and go to message center to check the records.
Tap “Member” to manage members’ information.
Tap “Temporary Code” to manage on-line and off-line codes.
Tap “One-Time Password” under Online Password to set an on-line one-time code.
Tap “Add Online Periodic Code” under Online Code to set an on-line code which
will be available in a period of time.
Tap “One-Time Password” under Off-line Password to generate an one-time off-
line code which will be a 10 digits code and use it when the device is off-
line.
Tap “Add Off-line Periodic Code” under Off-line Code to generate an off-line
code (10 digits) which will be available for a period of time, and use it when
the device is off-line or Bluetooth disconnected with device.
Tap “Clear Code” to generate a code (10 digits) which will be able to clear
single or all the off-line codes.
Please note if the code less than 10 digits you need to regenerate a new code,
the code must be 10 digits.
31 BUILDING, SHAHE RD, LONGGANG DISTRICT, SHENZHEN 518115, CHINA
COPYRIGHT @ 2016 – 2022 OMFOCUS TECH. ALL RIGHTS RESERVED.
Documents / Resources
|
xiaomi Smart Safe
OX
[pdf] User Manual
Smart Safe OX, Smart Safe, Safe, Safe OX
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>