TOLEDO 311018 CV Boot User Guide
- June 3, 2024
- TOLEDO
Table of Contents
TOLEDO 311018 CV Boot User Guide
TOLEDO CV BOOT TOOLS
301104
Banding Tool With Cutter – Band Style Clamps
-
For fastening of band style clamps on CV boots
-
Features cranks and handle along with inbuilt cutting assembly to enable band style clamps to be tightened and cut in during installation
-
311009
CV Boot Clamp Pliers
For fastening of clamps on CV boots, fuel hoses and water hoses without causing damage to spring band clamps and hoses -
Manufactured from chrome vanadium steel with black phosphate finish for maximum durability
309100
Digital Wheel Alignment Kit
- Portable one man kit for simple and accurate measuring of camber, caster, toe and KPI measurements
- Suits wheel sizes 10″20
- Detailed user guide included
311018 MAN © Copyright TRIDON AUSTRALIA PTY. LTD. 2015 A.C.N. 001 398 698 Reproduction of this manual in part or full is not permitted without written approval. Illustrations in this manual are for identification purposes only and there may be slight variations between the illustration and actual product. Whilst every effort has been made to ensure that the information contained in this catalogue is accurate at the time of printing, TRIDON AUSTRALIA PTY LTD will not accept responsibility should any inaccuracies be contained herein.
DIRECTION OF USE
Specifications
Documents / Resources
|
TOLEDO 311018 CV
Boot
[pdf] User Guide
311018 CV Boot, 311018, CV Boot, Boot
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>