GIGABYTE G27F 2 27 Inches Gaming Monitor User Guide

GIGABYTE G27F 2 27 Inches Gaming Monitor

Copyright
© 2022 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE.
Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice.
No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE’s prior written permission.

• In order to assist in the use of this monitor, carefully read the User Guide.
• For more information, check on our website at: https://www.gigabyte.com
  The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Safety Precautions

Read through the following Safety Precautions before using the monitor.

• Only use the accessories that are provided with the monitor or that which are recommended by the manufacturer.
• Keep the plastic packaging bag for the product in a place that cannot be reached by children.
• Before connecting the monitor to the power outlet, make sure that the voltage rating of the power cable is compatible with the power specification in the country where you are located.
• The power cord plug must be connected to a properly wired and grounded power outlet.
• Do not touch the plug with wet hands, otherwise easily cause electric shock.
• Place the monitor in a stable and well-ventilated place.
• Do not place the monitor near any heat sources such as electric radiators or direct sunlight.
• The holes or openings on the monitor are for ventilation. Do not cover or block the ventilation holes with any objects.
• Do not use the monitor near water, drinks, or all types of liquids. Failure to do so may result in electric shock or damage to the monitor.
• Make sure to unplug the monitor from the power outlet before cleaning.
• As the screen surface is easy to be scratched, avoid touching the surface with any hard or sharp object.
• Use a soft lint-free cloth instead of a tissue to wipe the screen. You may use a glass cleaner to clean the monitor if required. However, never spray the cleaner directly onto the screen.
• Disconnect the power cable if the monitor is not being used for a long period of time.
• Do not attempt to disassemble or repair the monitor yourself.

Stability Hazard Precautions
The product may fall, causing serious personal injury or death. To prevent injury, this product must be securely attached to the floor/wall in accordance with the installation instructions.
Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• ALWAYS use stands or installation methods recommended by the manufacturer of the product set.
• ALWAYS use furniture that can safely support the product.
• ALWAYS ensure the product is not overhanging the edge of the supporting furniture.
• ALWAYS educate children about the dangers of climbing on furniture to reach the product or its controls.
• ALWAYS route cords and cables connected to your product so they cannot be tripped over, pulled or grabbed.
• NEVER place the product on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the product to a suitable support.
• NEVER place the product on cloth or other materials that may be located between the product and supporting furniture.
• NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the product or furniture on which the product is placed.
• If the existing product is going to be retained and relocated, the same considerations as above should be applied.
• To prevent personal injury or damage to the product caused by tipping over due to earthquakes or other shocks, make sure to install the product in a stable location and take measures to prevent falling.

INTRODUCTION

Unpacking

1. Open the upper cover of the packaging box. Then observe the unpacking label attached on the inner cover.
2. Making sure the box is in the correct orientation, carefully lay the box on the stable surface.
3. Open the inner cover.
4. Grab the EPS foam assembly (through the openings) to pull it out of the box.
5. Remove the items from the upper EPS foam.
6. Remove the upper EPS foam. Then you can remove the monitor from the lower EPS foam.

Package Contents

The following items come with your packaging box. If any of them is missing, please contact your local dealer.

Note: Please keep the packaging box and packing materials for future transportation of the monitor.

Product Overview

Front View

1. Power LED

Rear View

1. Control button
2. Kensington lock
3. DisplayPort
4. HDMI ports (x2)
5. Headphone jack
6. USB upstream port
7. USB 3.2 ports (x2)
8. DC IN jack

Note:
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

GETTING STARTED

Installing the Monitor Base

1. Place the monitor on the lower EPS foam, with the screen facing down.
2. Align and slide the upper hooks on the stand into the mounting slots on the rear of the monitor. Push the locking latch forward and then release to secure the lower hooks on the stand into the mounting slots on the rear of the monitor.
3. Align the monitor base with the standoff underneath the stand. Then attach the base onto the stand.
4. Lift the screw ring and turn it clockwise to secure the monitor base in place.
5. Lift the monitor to an upright position and place it on a table.

Adjusting the Viewing Angle

Note: Hold the monitor base so that the screen does not topple when you make the adjustment.

Adjusting the Tilt Angle
Tilt the screen forward or backward to the desired viewing angle (5˚ to 20˚).

Adjusting the Screen Height
Lower or raise the screen to the desired height (0 to 130mm).

Installing a Wall-Mount Bracket (Optional)
Use only the 100 x 100 mm wall mount kit recommended by the manufacturer.

1. Place the monitor on the lower EPS foam, with the screen facing down.
2. While pushing the locking latch forward, slide the stand backward to release the upper hooks from the mounting slots on the rear of the monitor. Then remove the stand.
3. Attach the mounting bracket to the mounting holes at the rear of the monitor. Then use the screws to secure the bracket in place.
   Note: To mount the monitor on the wall, refer to the installation guide that is included in the wall-mount bracket kit.

Making Connections

1. DisplayPort cable
2. HDMI cable
3. Headphone cable
4. USB (A-Male to B-Male) cable
5. USB cable
6. Power adapter and power cable

USING THE DEVICE

Turning the Power On/Off

Power On

1. Connect one end of the power cable to the AC IN jack at the rear of the monitor.
2. Connect other end of the the power cable to a power outlet.
3. Press the Control button to turn on the monitor. The Power LED will light in white, indicating the monitor is ready to use.

Note: If no signal, the monitor will show No Signal notification for a while. Then, the monitor will go to power saving mode and the Power LED lights white and starts blinking with a period of one second.

Power Off
Press the Control button for 2 seconds to turn off the monitor.

Note: When the Main menu appears on the screen, you can also turn off the monitor by moving the Control button down . Refer to page 21.

User Comfort Recommendations
The Monitor adopts Flicker-Free technology which clears the eye visible monitor flicker and prevents users from suffering eye strain and fatigue.
The following are some tips for comfortable viewing of your monitor:

• Optimal viewing distances for monitors range from approximately 510 mm to 760 mm (20 in to 30 in).
• A general guideline is to position the monitor such that the top of the screen is at or slightly below your eye-height when you are comfortably seated.
• Use adequate lighting for the type of work you are performing.
• Take regular and frequent breaks (at least for 10 minutes) every 30 minutes.
• Be sure to periodically look away from your monitor screen and focus on a far object for at least 20 seconds during the breaks.
• Eye exercise can help reduce eye strain. Repeat these exercises frequently: (1) look up and down (2) slowly roll your eye (3) move your eyes diagonally.

Selecting the Input Source

1. Move the Control button right to enter the Input menu.
2. Move the Control button up/down to select the desired input source. Then press the Control button to confirm.

OPERATIONS

Quick Menu

Hot Key
By default, the Control button has been assigned with the specific function.
Note: To change the preset hot key function, refer to the “Quick Switch” section on page 30.

To access the hot key function, do the following:

• Move the Control button up to enter the Black Equalizer menu.
  Move the Control button up/down to adjust Black Equalizer the setting and press the Control button to confirm.

• Move the Control button down to enter the Picture Mode menu.
  Move the Control button up/down to select the desired option and press the Control button to confirm.

• Move the Control button left to enter the Volume menu.
  Move the Control button up/down to adjust the headphone volume level and press the Control button to confirm.

• Move the Control button right  to enter the the Input menu.
  Refer to the “Selecting the Input Source” section.
  Note: To close the menu, move the Control button left .

Function Key Guide
Press the Control button to display the Main menu.

Then use the Control button to select the desired function and configure the related settings.

Dashboard
When the Main menu appears on the screen, move the Control button left to enter the Dashboard menu.

• Function: Enable/Disable the function. When enabled, you can select the desired option(s) to be shown on the screen.
• Dashboard Location: Specify the location of the Dashboard information to be shown on the screen.
  Once the Dashboard configuration is complete, it will transfer the system data to the SOC through the USB port and display the value of the selected function(s) on the screen.

Note: Make sure the USB cable is properly connected to the USB upstream port of the monitor and the USB port of your computer.

Game Assist
When the Main menu appears on the screen, move the Control button right to enter the Game Assist menu.

• Game Info: Configure the FPS (First Person Shooting) game related settings.
  √ Select Gaming Timer to select countdown timer mode. To disable this function, set the setting to OFF.
  √ Select Gaming Counter or Refresh Rate to enable/disable the gaming counter or real-time refresh rate setting.
  √ Select Info Location to specify the location of the information to be shown on the screen.

• Crosshair: Select the desired crosshair type to suit your gaming environment. It makes aiming much easier.

• Display Alignment: When the function is enabled, it displays the alignment lines on the four sides of the screen, providing handy tool for you to line up multiple monitors perfectly.

Configure the Device Settings

When the Main menu appears on the screen, move the Control button up to enter the Settings menu.
Note: Use the Control button to navigate through the menu and make adjustments.

Gaming
Configure the game-related settings.

fast moving games.

Note: This function is not available under the following conditions:

–  when the frequency setting is lower than 100Hz.

–  when the FreeSync Premium function is activated.

Black Equalizer| Adjust the brightness of the black areas.
Item| Description
---|---
Super Resolution| Sharpen the low resolution images.
Display Mode| Select the aspect ratio of the screen.

• Full: Scale the input image to fill the screen. Ideal for 16:9 aspect images.

• Aspect: Display the input image without geometric distortion filling as much of the screen as possible.

Overdrive| Improve the response time of the LCD monitor.
AMD

FreeSync Premium

| When this function is enabled, it eliminates the screen lag and tearing while playing games.

Picture
Configure the image related settings.

Select the one of the preset picture mode.

• Standard: For editing documents or browsing websites.
• FPS: For playing FPS (First Person Shooting) games.
• RTS/RPG: For playing RTS (Real-Time Strategy) or RPG (Role-Playing Game) games.
• Movie: For watching movies.
• Reader: For viewing documents.
• sRGB: For viewing photos and graphics on the computer.
• Custom 1: Customized picture mode settings.
• Custom 2: Customized picture mode settings.
• Custom 3: Customized picture mode settings.

Then you can configure the following image settings.

Note: Select User Define to customize the color temperature by adjusting the red (R), green (G), or blue (B) level according to your preference.

DCR| Adjust the black level of the image to achieve the optimum contrast.
Low Blue Light| Reduce the amount of blue light exposure from the screen.

•  Level 0: No change.

•  Level 1~10: The higher the level, the more blue light will be reduced.

Note: Level 10 is optimized setting. It is compliance with TUV Low Blue Light Certification.

Reset Picture| Reset all Picture settings to the default settings.

Display
Configure the display screen related settings.

detect it automatically.

Note: This option is only available for HDMI input.

Overscan| When this function is enabled, it slightly enlarges the input image to hide the outermost edges of the image.

Note: This option is only available for HDMI input.

System
Configure the system related settings.

• Volume: Adjust the volume level.

• Mute: Enable/Disable the mute function.

OSD Settings| Configure the on-screen display (OSD) menu related settings.

• Display Time: Set the length of time the OSD menu remains on the screen.

• OSD Transparency: Adjust the OSD menu transparency.

• OSD Lock: When this function is enabled, no OSD adjustment is allowed.

Note: To disable the OSD lock function, press the Control key. When the message appears on the screen, select Yes to confirm.

Available options: Aim Stabilizer, Black Equalizer, Volume, Input, Contrast, Brightness, and Picture Mode.

The default setting of the hot keys as below:

D Up : Black Equalizer
D Down : Picture Mode
D Right : Input
D Left : Volume

Note: The Monitor uses low blue light panel and compliance with TÜV Rheinland Low Blue Light Hardware Solution at factory reset/default setting mode (Brightness: 45%, Contrast: 50%, CCT: Normal,

Preset mode: Standard).

Other Settings| • Resolution Notice: When this function is enabled, the recommended resolution message will appear on the screen when the monitor switches to another input source.

•  Input Auto Switch: When this function is enabled, it automatically switches to an available input source.

•  Auto Power OFF: When this function is enabled, the monitor will automatically turn off after a certain amount of time.

• LED Indicator: By default, the LED indicator is set to Always ON.

Always ON: The Power LED lights white during operation .

Always OFF: Turn off the Power LED.

Standby ON: The Power LED lights white in standby mode.

When the power supply is switched off, the Power LED will remain off.

• USB(A/C) Charge: Enable or disable the USB Type-A charging (5V/1.5A)function in standby mode.

Language
Select an available language for the OSD menu.

Save Settings
Set the personalized OSD configurations for Setting1, Setting2, or Setting3.

Reset All
Restore the monitor to its factory default settings.

APPENDICES

Specifications

•        1x DP1.2                    (downstream) with

•        1x Headphone           BC 1.2 charging

capability 5V/1.5A

•        1x USB upstream

Power Supply| AC 100-240V at 50-60Hz , Output 19VDC
AC Adapter Model| Asian Power Devices Inc. DA-65C19

Dongguan Yingju Power Co., Ltd. YJS065l- 1903420D

Power Consumptions| •   On: 21W

•   Standby: < 0.5W

•   Off: < 0.3W

Note: The test condition follows CEC standards.

Dimensions (W x H x D)| 615.11 x 535.66 x 193.63 mm (with stand)
Weight| •  5.2 ±0.5 kgs (with stand)

•  3.5 ±0.5 kgs (without stand)

Temperature Range (operation)| 0°C to 40°C

Note: Specifications subject to change without notice.

Supported Timing List

Troubleshooting

source and the monitor.

•  Check the cable and plug to make sure they are not broken.

•  Make sure the monitor is turned on.

No image appears on the screen| •  Make sure the monitor and the computer are properly connected and both devices are turned on.

• Make sure you have selected the correct input source. Refer to page 18 or 28.

• Adjust the Brightness and Contrast settings. Refer to page 26.

The image does not fill the entire screen| • Try different Display Mode (aspect ratio) setting. Refer to page 25.
The colors are distorted| • Make sure the input signal cable is properly connected.

•  Configure the image related settings. Refer to the “Picture” section.

No sound or volume is low| •  Make sure the headphone cable is properly connected.

•  Adjust the volume level. Refer to page 20 or 29.

• Adjust your computer sound related settings.

Basic Care
When the screen becomes dirty, do the following to clean the screen:

• Wipe the screen with your soft, lint-free cloth to remove any residual dust.
• Spray or apply the cleaning fluid onto a soft cloth. Then wipe the screen gently with the damp cloth.

Note:

• Make sure that the cloth is damp, but not wet.
• When wiping, avoid applying excessive pressure on the screen.
• Acidic or abrasive cleaners can damage the screen.

Notes on USB Charging
The following devices are not compatible with BC 1.2 of CDP mode. When the Hub is connected to a PC, these devices cannot be charged using the USB cable.

GIGABYTE Service Information
More service information, please visit GIGABYTE official website: https://www.gigabyte.com/

SAFETY INFORMATION

Regulatory Notices
United States of America, Federal Communications Commission Statement

Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information

Product Name: LCD monitor
Trade Name: GIGABYTE
Model Number: G27F 2
Responsible Party – U.S. Contact Information: G.B.T. Inc.
Address: 17358 Railroad street, City Of Industry, CA91748
Tel.: 1-626-854-9338
Internet contact information: https://www.gigabyte.com

FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules, Subpart B, Unintentional Radiators.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003.

European Union (EU) CE Declaration of Conformity
This device complies with the following directives: Electromagnetic Compatibility Directive 2014/30/EU, Low-voltage Directive 2014/35/EU, ErP Directive 2009/125/EC, RoHS directive (recast) 2011/65/EU & the 2015/863 Statement.
This product has been tested and found to comply with all essential requirements of the Directives.
European Union (EU) RoHS (recast) Directive 2011/65/EU & the European Commission Delegated Directive (EU) 2015/863

Statement
GIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6, PBDE, PBB, DEHP, BBP, DBP and DIBP). The parts and components have been carefully selected to meet RoHS requirement. Moreover, we at GIGABYTE are continuing our efforts
to develop products that do not use internationally banned toxic chemicals.
European Union (EU) Community Waste Electrical & Electronic

Equipment (WEEE) Directive Statement
GIGABYTE will fulfill the national laws as interpreted from the 2012/19/EU WEEE (Waste Electrical and Electronic Equipment) (recast) directive. The WEEE Directive specifies the treatment, collection, recycling and disposal of electric and electronic devices and their components. Under the Directive, used equipment must be marked, collected separately, and disposed of properly.

WEEE Symbol Statement

The symbol shown below is on the product or on its packaging, which indicates that this product must not be disposed of with other waste. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure.

For more information about where you can drop off your waste equipment for recycling, please contact your local government office, your household waste disposal service or where you purchased the product for details of environmentally safe recycling.

End of Life Directives-Recycling

The symbol shown below is on the product or on its packaging, which indicates that this product must not be disposed of with other waste. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure.

References

• GIGABYTE Global
• GIGABYTE Global

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>