G-TiDE R1 Smart Watch User Manual

G-TiDE R1 Smart Watch

Thank you for choosing our product
To have a comprehensive understanding and using this device, to know all the features and simple operation methods, please read this manual first.

All product drawings & function-instruction is used for reference only, the final correct details please see in instructions and packing kinds. Typing errors and discrepancies in this manual will be updated with the latest products. In case of any update, this manual will be changed at any time without notice. We reserved the finally explanatory rights.

Remarks:
This product can wash hands while wearing.

• Do not use it when taking a bath or sauna. Water vapor will enter the host and scratch and damage the surrounding parts. These are not covered by the warranty.
• All the above test data are for reference only and are not used as any basis for medical diagnosis.

Charging instructions

This product adopts wireless magnetic suction charging. Connect the charging point to the back of the charging pin of the device and it will charge automatically. It supports PC USB or standard 5V charger. Fully charged in 2 hours.

Caution:
Do not connect any two pins of the magnetic charging line with the conductive material at the same time, otherwise, it may cause a short circuit.

Operation Guide

1. Power on/off button: long press the watch to switch on and off; Short press to return to standby. Reset method to prevent crash: when the watch crashes, connect the charging line for charging, and then press the on key for a long time to trigger the reset function within 1-2s.
2. Dial switching: long press the dial and slide left or right to select a different dial; Or select a different dial by rotating the button to the left and right.
3. Sport mode button: press briefly to enter the sport mode directly.

Touch Description:
Slide to the right to enter the main menu, click the icon to enter the function, slide to the right to return to the main menu, and then slide to the left to return to a startup interface; Slide left to enter the next function.

GT FIT

Scan the QR code to download the app.

https://app.uteasy.com/gtfit/download/index.html.

Connect the watch

Download the “GT FIT” APP to your mobile phone and install it. You can directly search for “GT FIT” in the APP store to download, or you can scan the following QR code to jump to the connection to download.

Notes on Bluetooth connection

1. Open mobile location service and GT FIT location.
2. Open the GT FIT app device and adds device search Bluetooth to connect.

Please do not connect with Bluetooth in the background of your mobile phone. Be sure to search and connect through GT FIT app will not be able to search the Bluetooth. At this time, be sure to ignore the background Bluetooth and release the device. Go back to the GT FIT app to search and connect.

The icon on the top left is gray, which means the watch is not connected or occupied.

The icon on the top left is green, which means The watch has been connected and occupied Watch charging and activation Slide.

Notes on Bluetooth connection

1. Open mobile location service and GT FIT location
2. Open the GT FIT app device and add the device -search Bluetooth to connect.

Slide down the time dial of the watch to display the shortcut page, and then click to enter the setting page Set, and then click about to display the MAC address of the watch. You can determine your device by listing the MAC address of the watch through the device; After the watch is bound successfully, the watch will automatically connect with the mobile phone in the future, and the APP data page can be pulled down to refresh the data synchronously;

Watch operation guide

Frequently asked questions and answers

There are many factors determining the deviation of the values measured by the watch and sphygmomanometer The brachial artery was measured by the wristwatch, and the two main parts of the micro artery were measured by the wrist watch Under normal circumstances, the difference between aortic blood pressure measurement andmicroarterial blood pressure measurement is three to threeForty; If you’re using a watch and a sphygmomanometer, because of the flow in the artery It’s centrifuged blood, and the sphygmomanometer measures it with a strap below the middle of your elbow The patients in a state of pressure, and temporarily the blood can not flow smoothly to the lower artery Branch flow; The increase of blood pressure will make the deviation of blood pressure measurement larger.?

Why does blood pressure data deviate from a sphygmomanometer?
The temperature of the bath water is relatively high, it will produce a lot of water vapor, and the water vapor is a gas Body, its molecular radius is small, and easy to seep through the gap of the watch shell, when the temperature drops down, it will re-condense into liquid droplets, easy to cause the watch internal circuit short circuit, damage the watch circuit board, and damage the watch.

Frequently asked questions and answers

Why can’t the watch receive a message push?

Android phone settings:

1. Confirm to turn on the message push switch on the mobile client;
2. The confirmation message can be displayed normally in the mobile phone notification column, and the watch message is pushed by reading the mobile phone notification message; If there is no message in the notification column of the mobile phone, the watch will not be able to receive push; (you need to find the notification settings in the mobile phone settings and turn on the notification switches of WeChat, QQ, phone, SMS and mobile phone clients)

Iphone settings:

1. Confirm to turn on the message push switch on the mobile client;
2. The confirmation message can be displayed normally in the mobile phone notification column; (you need to find the notification settings in the mobile phone settings and turn on the notification switches of WeChat, QQ, phone, SMS, and mobile phone clients).

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the User is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

References

• GT FIT Pro Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>