G-TiDE HI-BOX Bluetooth Speaker Instruction Manual

G-TIDE

1.  About the Product
2. Product Overview
3. KeyFunction Description
4. Operation
5. Specifications

G-TiDE
BLUETOOTH SPEAKER
Model No.: Hi-box
INSTRUCTION MANUAL

About the Product

Effortless connectivity, Bluetooth V5.1 ensures instant pairing and maintains a strong connection up to about 33ft.
Astonishing sound experience, Dual-channel, 3.5mm stereo input interface, support Bluetooth, AUX, TF card play mode.
Supreme visual effect, amazing 3D printing technology, fashionable color matching, comfortable touch sense, exquisite craftsmanship, the lordliness of the product is embodied.
Intelligent voice prompt in English

Product Overview

1. POGO PIN Charging port
2. Volume -/ Last
3.  Power/ play/ pause
4.  Mode/ Bluetooth disconnect
5. Volume +/Next
6. TYPE_C Charging port
7. TF card
8. AUX

KeyFunction Description

1.  “-“: Under the Bluetooth/TF card playing status, long press for the previous play; short press for decreasing the volume.

2. “+”: Under the Bluetooth/TF card playing status, long press for the next play; short press for increasing the volume.

3. “M “: Mode, short press, the speaker will change to Bluetooth, TF CARD, AUX.
   ①Bluetooth mode (Default mode): Long press, disconnect or reconnect the speaker with your device.
   ②TF card mode: Insert TF card to switch to TF card mode for TF card music.
   ③AUX mode: If the audio cable is connected, it will switch to AUX mode, and the external input audio source will be played.

4.  ” “: Play/pause, power on/off：
   ①POWER: Long press for 3 seconds to turn on/off the speaker.
   ②MUSIC: Short press to pause or play the music.
   ③CALL: Short press to hang up or answer the call.

TYPEC : the red indicator light is on when charging, and will be off when fully charged.
TF card : Hot-swap, 32GB.
AUX : 3.5mm stereo external audio input.
POGO PIN : DC5V 2A.

Indicator light:
Blue working indicator light:
Quick Flash: Bluetooth pairing mode;
Blue: Non-play mode, Pause;
Slow Flash: Play mode
Red charging indicator light:
The LED indicator glows red while charging. And when fully charged, it will be off.

Operation

1. Long press the power switch, the speaker will send out a “Bluetooth MODE” start-up voice prompt. At this moment, the indicator will be on, the “Bluetooth icon” is ashing fast, the speaker starts normally. (startup default enters into the Bluetooth mode.)

2. Press the Mode button to choose to play mode(Bluetooth/AUX/TF card) if the user wants to play another sound source after turning on the speaker.
   ( Note : TF card mode is invalid when there is no TF card, and AUX mode is also invalid when there is no access to AUX audio.)

3. The connection method with the tablet
   ①Enter the Bluetooth mode: If you have connected to this device before, the speaker will reconnect to your device within 30 seconds. If the connection is not successful, the speaker will stay in Bluetooth pairing mode, and the Bluetooth indicator will flash quickly. (The connection time diers from different tablets).
   ②Turn on the Bluetooth on your device (The opening method of Bluetooth function diers from the different tablet) and enter into search, Hi-box will appear on your tablet, at this moment, click the matched pair, the device will match successfully with the Hi-box in few second, and the Bluetooth LED is steady on, at the same time a voice prompt is coming out.
   ③If connected successfully, the tablet will enter the music player interface, you can choose your favorite music to play and enjoy it.
   ④Short press ” ****“button to answer the call, and continue the call through Hi-box; and short press “ ” button to end the calls (Answering calls through Hi-Box can automatically hold a conversation through the speaker while the conversation can be held through the speaker when you answer the call by your tablet, automatic telephone exchange diers from a different tablet, you can use the native controls on your Bluetooth device.)

4. Turn off the power: While the speaker is not in use, please long press the POWER button to turn off the speaker to prevent power loss and protect its battery. There is a low battery warning and voice prompt when the battery power is low and please charge the speaker timely.

5.  When the speaker disconnects Bluetooth for 10 minutes, it will automatically turn off.

6. For the operation method of using the mobile phone, please refer to the operation method of the tablet connection operation.

7.  How to use the speaker holder?

Notice :

1. It’s dangerous if you replace the battery improperly. You can only use the same type or equivalent type of battery to replace the damaged one. Battery(battery pack or combination battery) shall not be exposed to overheating environments such as sunshine and fire.
2. The maximum ambient temperature is 45°C.

Warm Reminder:
This device will power off automatically after 5 minutes if no any working conditions for power saving.

Specifications

Model No.: Hi-box
Channel system: Dual channel, stereo
Speaker power: 5W*2
Speaker impedance: 4 ohms
Transmission distance: <10M (Transmission distance diers from environment and Bluetooth device)
USB voltage: DC 5V
Built-in lithium battery: 3.7V/800mAh
Battery Life: 2 hours (volume at 100%)
Charging method: TYPE_C+ lithium battery
I/O interface: TYPE_C/TF Slot/Audio in
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>