LightCloud G25 Tunable White Filament User Guide

: June 3, 2024
: Lightcloud

Table of Contents

LightCloud G25 Tunable White Filament
Product Features
Safety Information
Installing your Lightcloud Blue Lamp
Controlling your Lightcloud Blue Device
Setting Device to Pairing Mode
Functionality
FCC Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LightCloud G25 Tunable White Filament

LightCloud-G25-Tunable-White-Filament-PRODUCT

Hello

Lightcloud Blue is a Bluetooth mesh wireless lighting control system that allows you to control RAB’s various compatible devices. With RAB’s patent- pending Rapid Provisioning technology, devices can be quickly and easily commissioned for residential and large commercial applications using the Lightcloud Blue mobile app. Each device in a system can communicate with any other device, eliminating the need for a Gateway or Hub and maximizing the control system’s reach.

Product Features

Direct Connect LED, No Gateway or Hub required

Wireless control from your mobile device On/oﬀ and dimming
Tunable White 2200K-4500K
Create custom scenes
Activity Mode
Sensor compatible
Schedules and automation
SmartShift™ automated circadian schedule

Catalog Number: LCBST19-6-E26-9TW-F-C-SS
Model Number: LCBST19-6-E26-9TW-F-C-SS
Electrical: 6W, 800lm120Vac60Hz
Construction: Lamp Base: E26

Safety Information

Not suitable for use with dimmers and sensors unless speciﬁcally designed for RAB Lightcloud Blue Lamps.
Risk of electric shock.
Do not use where directly exposed to water.
Not intended for use with emergency exit ﬁxtures or emergency lights.
Only install in operating environments between – 4°F and 113°F (-20°C to 45°C).
Only use the control provided with or speciﬁed by these instructions to control this lamp. This lamp will not operate properly when connected to a standard (incandescent) dimmer or dimming control.
CAUTION: RISK OF ELECTRIC SHOCK. Do not use if outer lamp envelope is damaged or broken.

Installing your Lightcloud Blue Lamp

Turn oﬀ power

Place the wall switch in the oﬀ position.
Turn oﬀ the main power at the breaker panel or remove the fuse from the fuse box.

Find a suitable location

Lightcloud Blue devices should be positioned within 60 ft. of each other.
Building materials such as brick, concrete and steel construction may require additional Lightcloud Blue devices to extend around an obstruction.

Connect device to power

For ﬁrst time use, the lamp will be ready to pair to the Lightcloud Blue app Power on the lamp to enter pairing mode. While pairing, the lamp will ﬂash on/oﬀ 5x and then dim and ﬂash on/oﬀ 3x to indicate that it has been paired as an Ungrouped Device in the Lightcloud Blue app.

Controlling your Lightcloud Blue Device

Conﬁrm your device is powered on.
Download the Lightcloud Blue app from the Apple® App Store or Google® Play store.
Launch the App and create an account.
Tap the “add device” icon in the app to start connecting devices.
Follow the remaining steps in the app. Create areas, groups, and scenes to organize and control your devices.
You’re all set!

Setting Device to Pairing Mode

To restore your Lightcloud Blue ST19 Filament Tunable White lamp to factory settings, use the following methods.
Method 1: Delete from App

Open the app and access the device settings for the paired device. Be sure that the lamp is online and select “Delete”.

Method 2: Manual

Power the lamp oﬀ and on 5 times consecutively. Do not allow less than 1 second and more than 3 seconds to elapse between switching. The lamp will ﬂash 3 times, then reset to 100% brightness at default CCT.

Functionality

All conﬁguration of Lightcloud Blue products may be performed using the Lightcloud Blue app.

Emergency default
If communication is lost, the Lightcloud Blue lamps may fall back to a speciﬁc state, such as turning the Lightcloud Blue lamps on.

FCC Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
Note: This device has been tested and found to comply with the limits for Class B digital devices pursuant to Part 15 Subpart B, of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try and correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

To comply with the FCC’s RF exposure limits for general population / uncontrolled exposure, this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modiﬁcations to this equipment. Such modiﬁcations could void the user’s authority to operate the equipment.
CAUTION: Changes or modiﬁcations to this equipment not expressly approved by RAB Lighting may void the user’s authority to operate this equipment.

Lightcloud Blue is a Bluetooth mesh wireless lighting control system that allows you to control RAB’s various compatible devices. With RAB’s patent- pending Rapid Provisioning technology, devices can be quickly and easily commissioned for residential and large commercial applications using the Lightcloud Blue mobile app. Each device in a system can communicate with any other device, eliminating the need for a Gateway or Hub and maximizing the control system’s reach.

Learn more at: www.rablighting.com