Simply45 S45-3600B-W Cat6-6A UTP 180 Degree Keystone Jack Installation Guide

June 3, 2024
Simply45

Simply45 S45-3600B-W Cat6-6A UTP 180 Degree Keystone Jack

Cat6/6A UTP 180° Keystone Jack 110 Style, Toolless, w/6 Color ID, 568B Wiring Label, ANSI/TIA 568.2-D, ISO/IEC 11801 Class E, Ea, UL

TERMINATION INSTRUCTIONS

Simply45 S45-3600B-W-Cat6-6A UTP-180-Degree-
Keystone-Jack-FIG- \(1\)

  TIA / EIA TIA / EIA
  T568A T568B
1 White/Green White/Orange
2 Green Orange
3 White/Orange White/Green
6 Orange Green
4 Blue
5 White/Blue
7 White/Brown
8 Brown

INSTALLATION STEPS

  1. Strip off 1.6 inch of cable jacket. Fold back the drain wire.
  2. Insert a cable into the termination cap and fan out all four twisted pairs. Following the instruction of the color-coded wire position printed on the termination cap, position conductors into the slots and make sure the conductors are in the proper slot. Trim the ends of the conductors.
  3. Install the termination cap to outlet, which will also allocate the conductors sitting on the slotsSimply45 S45-3600B-W-Cat6-6A UTP-180-Degree-Keystone-Jack-FIG- \(4\)
  4. Secure the hinged outlet by using a crimp tool until it completely snap to effect the connectionSimply45 S45-3600B-W-Cat6-6A UTP-180-Degree-Keystone-Jack-FIG- \(5\)
  5. Fasten a cable tie wrap to secure drain wire on the cable fixture.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals