Panasonic SL-G700M2 Network and Super Audio CD Player Owner’s Manual

SL-G700M2 Network and Super Audio CD Player

SL-G700M2

Network/Super Audio CD Player Lecteur Super Audio CD/réseau

Basic Owner’s Manual Manuel d’utilisation Fonctions de base

Music is borderless and timeless, touching people’s hearts across cultures and generations. Each day the discovery of a truly emotive experience from an unencountered sound awaits. Let us take you on your journey to rediscover music. Sans frontières, la musique est aussi intemporelle, touchant le coeur des gens en traversant les cultures et les générations. Tous les jours, nous attendons la révélation d’une expérience émotionnelle authentique à partir d’un son venu de nulle part. Permettez-nous de vous emmener en voyage pour redécouvrir la musique.
02 (02)

Delivering the Ultimate Emotive Musical Experience to All
At Technics we understand that the listening experience is not purely about technology but the magical and emotional relationship between people and music. We want people to experience music as it was originally intended and enable them to feel the emotional impact that enthuses and delights them. Through delivering this experience we want to support the development and enjoyment of the world’s many musical cultures. This is our philosophy. With a combination of our love of music and the vast high-end audio experience of the Technics team, we stand committed to building a brand that provides the ultimate emotive musical experience by music lovers, for music lovers.
Apportez à tous l’expérience musicale empreinte d’émotions
Chez Technics, nous savons que l’expérience de l’écoute n’est pas purement et simplement une question de technologie, mais de relation magique entre les personnes et la musique. Nous voulons que tout un chacun puisse ressentir la musique telle qu’elle a été conçue à l’origine et lui permettre de ressentir le choc émotionnel qu’il brûle de connaître. En apportant ce vécu, nous cherchons à accompagner le développement et le plaisir des nombreuses cultures musicales du monde. Telle est notre philosophie. Ici et maintenant, alliant l’amour de la musique et la grande expérience musicale de l’équipe Technics, nous sommes pleinement déterminés à construire une marque qui apporte le vécu musical émotionnel aux fervents de la musique.
Director Directeur
Michiko Ogawa
(03) 03

Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. · About descriptions in these operating instructions
– Pages to be referred to are indicated as ” “. – The illustrations shown may differ from your unit. – Unless otherwise indicated, operations are described using the remote control. · Illustrations and figures in this manual are of the silver main body. · A more detailed operating instruction is available in “Operating Instructions” (PDF format).
To read it, download it from the website. www.technics.com/support/downloads/oi/SL-G700M2.html · You will need Adobe Reader to browse or print “Operating Instructions” (PDF format). You can download and install a version of Adobe Reader that you can use with your OS from the following website. http://www.adobe.com/products/acrobat/readstep2.html If you have any questions, visit: U.S.A.: http://shop.panasonic.com/support Canada: www.panasonic.ca/english/support Register online at http://shop.panasonic.com/support (U.S. customers only)
04 (04)

Basic
English

Table of contents

IMPORTANT SAFETY INSTRUCTIONS

06

Installation

08

Control reference guide

09

Connections

12

Network settings

13

Playback

17

Licenses

19

Specifications

20

Limited Warranty

22

Accessories

AC power supply cord (1) K2CG3YY00191

System connection cable (1) K2KYYYY00233

Analog audio cable (1) K4EY4YY00003

Remote control (1) N2QAYA000240

Batteries for remote control (2)

· Product numbers provided in these operating instructions are correct as of October 2022. · These may be subject to change. · Do not use AC power supply cord with other equipment.

Using the remote control 2 1
R03/LR03, AAA (Alkaline or manganese batteries)

Note · Insert the battery so the terminals ( and ) match those in
the remote control. · Point it at the remote control signal sensor on this unit. ( 09) · Keep the batteries out of reach of children to prevent
swallowing.
(05) 05

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference.
1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install
in accordance with the manufacturer’s instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 Only use attachments/accessories specified by the manufacturer. 12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 13 Unplug this apparatus during lightning storms or when unused for long periods of time. 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Warning
Unit · To reduce the risk of fire, electric shock or
product damage, – Do not expose this unit to rain, moisture,
dripping or splashing.
06 (06)

– Do not place objects filled with liquids, such as vases, on this unit.
– Use the recommended accessories. – Do not remove covers. – Do not repair this unit by yourself. Refer
servicing to qualified service personnel. – Do not let metal objects fall inside this unit. – Do not place heavy items on this unit.
AC power supply cord · The power plug is the disconnecting device.
Install this unit so that the power plug can be unplugged from the socket outlet immediately. · Ensure the earth pin on the power plug is securely connected to prevent electrical shock. – An apparatus with CLASS I construction shall
be connected to a power socket outlet with a protective earthing connection.
Caution
Unit · This unit utilizes a laser. Use of controls or
adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. · Do not place sources of naked flames, such as lighted candles, on this unit. · This unit may receive radio interference caused by mobile telephones during use. If such interference occurs, please increase separation between this unit and the mobile telephone.
Placement · Place this unit on an even surface. · To reduce the risk of fire, electric shock or
product damage, – Do not install or place this unit in a bookcase,
built-in cabinet or in another confined space. Ensure this unit is well ventilated. – Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items. – Do not expose this unit to direct sunlight, high temperatures, high humidity, and excessive vibration.
Battery · Danger of explosion if battery is incorrectly
replaced. Replace only with the type recommended by the manufacturer. · Mishandling of batteries can cause electrolyte leakage and may cause a fire. – Remove the battery if you do not intend to
use the remote control for a long period of time. Store in a cool, dark place. – Do not heat or expose to flame. – Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed. – Do not take apart or short circuit.

– Do not recharge alkaline or manganese batteries.
– Do not use batteries if the covering has been peeled off.
– Do not mix old and new batteries or different types at the same time.
· When disposing of the batteries, please contact your local authorities or dealer and ask for the correct method of disposal.
· Avoid the use in the following conditions – High or low extreme temperatures during use, storage or transportation. – Replacement of a battery with an incorrect type. – Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. – Extremely high temperature and/or extremely low air pressure that can result in an explosion or the leakage of flammable liquid or gas.

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Conforms to UL STD 62368. Certified to CAN/CSA STD C22.2 No.62368.

THIS FOLLOWING APPLIES IN THE U.S.A. AND CANADA. This device complies with part 15 of FCC Rules and Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC ID: ACJ-SL-G700M2 IC: 216A-SLG700M2 This transmitter must not be co- located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the ISED radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20 cm (7 7/8″) or more away from person’s body.
For indoor use only
THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the
equipment and receiver. · Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV
technician for help.
FCC Caution: To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to peripheral devices. Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.
THE FOLLOWING APPLIES ONLY IN CANADA. CAN ICES-3(B)/NMB-3(B)
(07) 07

English

IMPORTANTES MISES EN GARDE

Avant d’utiliser l’appareil, lire attentivement les instructions qui suivent. Se conformer tout particulièrement aux avertissements inscrits sur l’appareil et aux consignes de sécurité indiquées ci-dessous. Conserver le présent manuel pour consultation ultérieure.
1 Lire attentivement ces instructions. 2 Conserver ces instructions. 3 Lire toutes les mises en garde. 4 Suivre toutes les instructions. 5 Ne pas utiliser cet appareil près d’une source
d’eau. 6 Ne nettoyer qu’avec un chiffon sec. 7 Ne pas bloquer les évents d’aération. Installer
l’appareil selon les instructions du fabricant. 8 Ne pas installer l’appareil près d’un appareil
de chauffage tel qu’un radiateur, une cuisinière, un registre de chaleur ou tout dispositif émettant de la chaleur (y compris un amplificateur). 9 Pour des raisons de sécurité, ne pas modifier la fiche polarisée ou celle de mise à la terre. Une fiche polarisée est une fiche à deux lames, dont une plus large. Une fiche de mise à la terre est une fiche à deux lames avec une broche de masse. La lame plus large ou la broche de masse procure une protection accrue. Si ce genre de fiche ne peut être inséré dans une prise de courant, communiquer avec un électricien pour remplacer la prise. 10 S’assurer que le cordon est placé dans un endroit où il ne risque pas d’être écrasé, piétiné ou coincé. Faire particulièrement attention à ses extrémités de branchement, y compris sa fiche. 11 N’utiliser que les accessoires ou périphériques recommandés par le fabricant. 12 N’utiliser l’appareil qu’avec un chariot, meuble, trépied, support ou table recommandé par le fabricant ou vendu avec l’appareil. Lors de l’utilisation d’un chariot, le déplacer avec le plus grand soin afin d’éviter tout dommage.
13 Débrancher cet appareil lors d’un orage ou en cas de non-utilisation prolongée.
14 Confier l’appareil à un technicien qualifié pour toute réparation : cordon d’alimentation ou fiche endommagé, liquide renversé ou objet tombé dans l’appareil, exposition à la pluie ou à une humidité excessive, mauvais fonctionnement ou échappement de l’appareil.

AVERTISSEMENT
Appareil · Pour réduire les risques d’incendie, de choc
électrique ou de dommages à l’appareil, – N’exposez pas cet appareil à la pluie,
à l’humidité, à l’égouttement ou aux éclaboussements. – Ne placez sur l’appareil aucun objet rempli de liquide, comme par exemple des vases. – Utilisez les accessoires recommandés. – Ne retirez pas les couvercles. – Ne réparez pas cet appareil vous-même. Faites effectuer la réparation par un personnel qualifié. – Ne laissez aucun objet en métal tomber à l’intérieur de cet appareil. – Ne posez pas d’objets lourds sur cet appareil.
Cordon d’alimentation c.a. · La fiche d’alimentation permet de déconnecter
l’appareil. L’appareil doit être installé à proximité d’une prise secteur facile d’accès. · Assurez-vous que la lame pour la mise à la terre est insérée bien à fond afin de prévenir tout choc électrique. – Un appareil de classe 1 devrait être branché
dans une prise secteur avec une protection pour mise à la terre.
ATTENTION
Appareil · Cet appareil est doté d’un lecteur au laser.
L’utilisation de commandes ou le recours à des réglages autres que ceux indiqués dans ce manuel peuvent présenter des risques d’exposition à des radiations. · Ne placez aucune source de flamme nue, telles des bougies allumées, sur l’appareil. · Il est possible que cette unité reçoive des interférences provenant de téléphones cellulaires pendant son utilisation. Si de telles interférences se produisent, veuillez éloigner l’unité du téléphone cellulaire.

06 (26)

Emplacement · Positionnez cet appareil sur une surface plane. · Pour réduire les risques d’incendie, de choc
électrique ou de dommages à l’appareil, – N’installez pas cet appareil dans une
bibliothèque, une armoire ou tout autre espace confiné. Assurez-vous que la ventilation de l’appareil est adéquate. – N’obstruez pas les évents d’aération de l’appareil avec des journaux, des nappes, des rideaux ou d’autres objets similaires. – N’exposez pas cet appareil aux rayons directs du soleil, aux températures élevées, à une humidité élevée et à des vibrations excessives.
Piles · Il y a un danger d’explosion si les piles ne sont
pas correctement remplacées. Remplacez uniquement par le type recommandé par le fabricant. · La manipulation incorrecte des piles peut causer une fuite d’électrolyte, ainsi qu’un incendie. – Retirez les piles si vous n’avez pas l’intention
d’utiliser la télécommande pendant un long moment. Rangez-les dans un endroit frais et sombre. – Ne chauffez pas et n’exposez pas les piles à une flamme. – Ne laissez pas la (les) pile(s) dans un véhicule exposé directement aux rayons du soleil pendant un long moment avec fenêtres et portières fermées. – Ne démontez pas les piles et ne les courtcircuitez pas. – Ne rechargez pas des piles alcalines ou au manganèse. – N’utilisez pas des piles dont le revêtement a été enlevé. – Ne mélangez pas des piles usées avec des piles neuves ou différents types de piles. · Pour jeter les piles, veuillez contacter les autorités locales ou votre revendeur afin de connaître la procédure d’élimination à suivre.

AVIS
RISQUE DE CHOC ÉLECTRIQUE
NE PAS OUVRIR

AVIS :

AFIN DE PRÉVENIR LE RISQUE DE CHOCS ÉLECTRIQUES, NE PAS RETIRER LES VIS. AUCUNE PIÈCE RÉPARABLE PAR L’UTILISATEUR À L’INTÉRIEUR. FAITES EFFECTUER LA RÉPARATION PAR UN PERSONNEL QUALIFIÉ.

Le symbole de l’éclair dans un triangle équilatéral indique la présence d’une tension suffisamment élevée pour engendrer un risque de chocs électriques.
Le point d’exclamation dans un triangle équilatéral indique que le manuel d’utilisation inclus avec l’appareil contient d’importantes recommandations quant au fonctionnement et à l’entretien de ce dernier.
Conforme à la norme UL STD 62368. Conforme à la norme CAN/CSA STD C22.2 No.62368.
CE QUI SUIT NE S’APPLICQUE QU’AUX ÉTATS-UNIS ET AU CANADA. Le présent appareil est conforme à la partie 15 des règles de la FCC et aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’appareil doit accepter tout brouillage subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
FCC ID : ACJ-SL-G700M2 IC : 216A-SLG700M2 Cet émetteur ne doit pas être placé à proximité d’une autre antenne ou d’un autre émetteur, ni être utilisé de pair avec de tels autres appareils. Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les lignes directrices d’exposition aux radiofréquences de la FCC et la règle CNR-102 de l’ISDE sur l’exposition aux radiofréquences. Cet équipement doit être installé et utilisé en gardant une distance de 20 cm (7 7/8 po) ou plus entre l’émetteur et le corps humain.
Pour usage intérieur seulement
CE QUI SUIT NE S’APPLIQUE QU’AU CANADA. CAN ICES-3(B)/NMB-3(B)

Français

(27) 07

Installation

Installation
· Eject a CD, fold the antenna and turn off all the equipment before connection and read the appropriate operating instructions. Be sure to raise this unit when moving, and do not drag this unit.
· Confirm the installation location can sustain the weight of this unit. ( 20)
· For the dimensions of this unit ( 20) · Refer to the following figure for the dimensions
of this unit’s legs.
Front

A

A: 340 mm

(13 25/64″)

B: 285 mm

(11 7/32″) B

Unit care
Pull out the AC power supply cord from the socket before maintenance. Clean this unit with a soft cloth. · When dirt is heavy, wring a wet cloth tightly to
wipe the dirt, and then wipe it with a soft cloth. · Do not use solvents including benzine, thinner,
alcohol, kitchen detergent, chemical wiper, etc. Doing so may cause the exterior case to be deformed or the coating to come off.
Using “Technics Audio Center”
If you install the dedicated app “Technics Audio Center” (free of charge) on your tablet/ smartphone, you can stream music files from the device on your network to this unit and configure the settings of sound quality, etc. For details, visit: www.technics.com/support/ · This application is subject to change or be
discontinued with notice.

08 (08)

Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.

Firmware updates
Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. These updates are available free of charge. · For the update information, refer to the
following website. www.technics.com/support/firmware/
To restore all the settings to the factory defaults
Press [NWP] or [CD] while this unit is turned on. Press [SETUP]. Press [ ], [ ] repeatedly to select “Initialization” and then press [OK]. Press [ ], [ ] to select “Yes” and then press [OK]. · A confirmation screen appears. Select “Yes”
in the following steps to restore all the settings to defaults. Press [ ], [ ] to select “Yes” and then press [OK] again.
To dispose of or transfer this unit
· Before disposing of or transferring this unit, be sure to erase all the recorded information by restoring the settings to factory default (above).
· Before you dispose of or transfer this unit to a third party, be sure to log out of your music streaming services accounts to prevent unauthorized use of your accounts.

CLASS 1 LASER PRODUCT

IEC60825-1:2001

CAUTION This product contains a laser diode of higher class than 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.

(Inside of product)

This unit (front)

Control reference guide

English

01 [ ] Standby/on button · Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.
02 Power indicator · Blue: The unit is on. · Red: The unit is in standby mode. · Off: The unit is off.
03 Headphones jack · Excessive sound pressure from earphones and headphones can cause hearing loss. · Listening at full volume for long periods may damage the user’s ears.
04 USB-A terminal (USB-A Front) (For AV) (DC 5 V 500 mA) · You can connect a USB device to the unit and play back music stored on the USB device. ( 18) · You can connect the USB flash memory with new firmware and update the firmware for this unit. For details, refer to the following website. www.technics.com/support/firmware/
05 Remote control signal sensor · Reception distance: Within approx. 7 m (23 ft) directly in front · Reception angle: Approx. 30° left and right

06 Disc tray ( 17)
07 Display · Input source, playback status, etc. are displayed.
08 [ ] Open or close the disc tray
09 Playback operation buttons (e.g. “CD”)

Stop Play/Pause Skip Search

[] [

]

· Press again to resume.

[ ][ ]

Press and hold [ ] or [ ].

10 Multi-control knob · Turn this knob clockwise or anticlockwise to switch the input source and scroll through items. · To set an item, press the knob; to enter the setup screen, press and hold it.
11 Input selector button · Switch the input source.
12 Headphone volume button · Headphone volume is displayed. (Volume can be adjusted with the multi-control knob while displaying.) · — dB (min), -99.0 dB to 0 dB (max)

(09) 09

Control reference guide (Continued)

This unit (rear)

01 Analog audio output terminals (ANALOG OUT) · You can connect the pre- amplifier which has the unbalanced input terminals, etc. with analog audio cable (supplied) to output the analog audio signals. · You can connect the pre-amplifier which has the balanced input terminals, etc. with XLR cable (not supplied).
02 Wireless LAN antenna ( 14)
03 Optical digital output terminal (OPT) You can connect a digital audio output device such as D/A converter, etc. with optical digital audio cable (not supplied) and play back music.
04 Coaxial digital output terminal (COAX) You can connect a digital audio output device such as D/A converter, etc. with coaxial digital cable (not supplied) and play back music.
05 Optical digital input terminal (OPT) You can connect a digital audio output device with optical digital audio cable (not supplied) and play back music. · The digital audio input terminals of this unit can only detect the following linear PCM signals. For details, refer to the operating instructions of the connected device. – Sampling frequency: 32/44.1/48/88.2/96 kHz – Number of quantization bits: 16/24 bit
10 (10)

06 Coaxial digital input terminal (COAX) You can connect a digital audio output device with coaxial digital cable (not supplied) to this unit and play back music. · The digital audio input terminals of this unit can only detect the following linear PCM signals. For details, refer to the operating instructions of the connected device. – Sampling frequency: 32/44.1/48/88.2/96/176.4/192 kHz – Number of quantization bits: 16/24 bit
07 USB-B terminal (USB-B) You can connect the PC, etc. or another device with USB 2.0 cable (not supplied) to this unit and play back music. · For details, refer to “Operating Instructions”.
08 Product identification marking · The model number is indicated.
09 USB-A terminal (USB-A Rear) (DC 5 V 1 A) You can connect a USB HDD to the unit and play back music stored on the USB HDD. ( 18)
10 LAN terminal ( 14)
11 System terminal (CONTROL)
12 AC IN terminal ( ) ( 12)

English

Remote control

Buttons that works for this unit
01 [NWP ]/[CD ]: Standby/on button · Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. The input source also switches for each (switches to the last selected input source when [NWP ]).
02 [NWP]/[CD]: Select the device to be operated · The playing layer switches by pressing [CD] while the playback stops for Hybrid Super Audio CD (SACD). · Press and hold [CD] to switch to “Pure Disc Playback” mode. ( 18)

03 [>INPUT<]: Switch the input source
04 [ ]: Open or close the disc tray
05 [INFO]: View content information
06 [ ], [ ], [ ], [ ]/[OK]: Selection/OK
07 [RETURN]: Return to the previous display
08 [MQA]: Switches MQA decoding function to “On”/”Off” · “MQA Decoding : On” is displayed when the function is “On”. · Press repeatedly to switch the function.
09 [DIMMER]: Adjust the brightness of the power indicator, display, etc. · Press repeatedly to switch the brightness.
10 [MENU]: Enter menu
11 [SETUP]: Enter setup menu*
12 Playback control buttons ( 17)
13 Numeric buttons, etc. · To enter 2 digits or more Example: 16: [ 10] > [1]

[6] 124: [ 10] > [ 10] > [1] > [2] > [4] · [CLEAR]: Clear the entered value.
*: Press [NWP]/[CD] first to operate this unit.
(The remote control works only for the devices supporting system control function when pressing [AMP].)
Buttons that work for the connected
Technics devices The remote control of this unit also works for Technics devices (Stereo Integrated Amplifier, etc.). For information on the operations of the devices, please also refer to their operating instructions.
01 [ ] Standby/on button 02 Select the device to be operated 03 Select the input source 04 Measure the output signal when speakers
are connected, and correct its output
05 Adjust the volume 06 Mute the sound

(11) 11

Basic

Connections

Connecting to an amplifier
XLR cable* (not supplied)

Analog audio cable (supplied)

Pre-amplifier with unbalanced input terminals

Pre-amplifier with balanced input terminals

Amplifier (AV receiver, control amplifier, etc.)
*: We recommend using cables with a length of
3 m (10 ft) or less. · For details, refer to the operating instructions of
the connected device. · Do not use any other analog audio cables
except the supplied one.
Connecting to a digital audio output device

Optical digital audio cable (not supplied)

Coaxial digital cable (not supplied)

· Audio signal of Super Audio CD and Super Audio CD layer of Hybrid Super Audio CD cannot be output from the digital audio output terminal of this unit. Connect the device to the analog audio output terminal.
· When enjoying video contents with this function, the video and audio output may not be synchronized.
· For details, refer to the operating instructions of the connected device.
AC power supply cord connection
Connect only after all other connections are completed.
AC power supply cord (supplied)
To a household AC outlet
Insert the AC power supply cord up to a point just before the round hole. · Use only the supplied AC power supply cord. · Insert the plugs of the cables to be connected all the way in. · Do not bend cables at sharp angles. · Wireless LAN (Wi-Fi®) setting may start when this unit is turned on. If you stop the Wi-Fi setting, select “No” in “Wi-Fi Setup” screen. Select “Yes” to keep the Wi-Fi setting. ( 14) · Press [NWP]/[CD] first to operate this unit. Note · This unit consumes a small amount of AC power ( 20) even when the unit is in standby mode. Remove the plug from the main electrical outlet if you will not be using the unit for an extended period of time. Place the unit so the plug can be easily removed.

12 (12)

Digital audio output device

Network settings
You can stream online music services or music files from your smartphone/tablet to this unit. To use these features, this system must join the same internet-connected network as the compatible device.

Basic

This unit can be connected to a router using a LAN cable or built-in Wi-Fi®. For a stable connection to the network, a wired LAN connection is recommended.

English

Note
· If you try to change the network settings immediately after turning on this unit, it may take some time until the network setup screen is displayed.
· If “Firmware update is available” is displayed after the network connection is set up, the firmware for this unit is available. – For the update information, refer to the following website. www.technics.com/support/firmware/
· In order to fully enjoy all the features the SLG700M2 has to offer, it has been designed to work with the Google Home app which integrates with your Google account.
Preparation
If you install the Google Home app or Apple Home app on your smartphone/tablet, you can set up a connection using the application. · When using Chromecast-enabled apps to play
music on this unit, set up a connection using the Google Home app and a Google Assistantenabled device. · When using AirPlay to play music on this unit, add the product to Home in the Apple Home app. Adding this unit to the network via Apple Home app will also allow the user to stream audio using Siri. · Make sure that the Wi-Fi function and Bluetooth® function are activated on your smartphones/tablet.

(Using Google Home app) 1 Install the Google Home app on your
smartphone/tablet. · To download the Google Home app, visit:
https://www.google.com/cast/setup/
(Using Apple Home app) 1 Install Apple Home app on your
smartphone/tablet. · To download Apple Home app, visit:
https://www.apple.com/ios/home/
2 Connect your smartphone/tablet to the same network as this unit before setting. · Make sure that the network is connected to the Internet.
(13) 13

Basic

Network settings (Continued)

Wired LAN connection

Point up the antenna on the rear of this unit as shown in the figure.

LAN cable (not supplied)
Broadband router, etc.
1 Disconnect the AC power supply cord. 2 Connect this unit to a broadband
router, etc. using a LAN cable. 3 Connect the AC power supply cord to
this unit. ( 12) 4 Press [NWP ]/[CD ] to turn this
unit on. · When the connection is established, ” ” is
displayed. 5 Press [>INPUT<] to select “Chromecast
built-in”. (Using Google Home app) 6 Open the Google Home app and
follow the on-screen instructions to set up a connection. ( 16) (Using Apple Home app) 6 Open Apple Home app and follow the on-screen instructions to set up a connection. ( 16)
Note · While the AC power supply cord is
disconnected, the LAN cable must be connected or disconnected. · Use category 7 or above straight LAN cables (STP) when connecting to peripheral devices. · Inserting any cable other than a LAN cable in the LAN port can damage the unit. · When a LAN cable is connected, the Wi-Fi function may be disabled.
Wireless LAN connection Preparation
Disconnect the AC power supply cord. Disconnect the LAN cable. Place this unit as close to the wireless router as possible.
14 (14)

Connect the AC power supply cord to this unit. ( 12)
Note
· The setting will be cancelled after the set time limit. In that case, try the setting again.
· To cancel this setting in the middle, press [ ] or turn the unit to standby mode.
· When the connection is established, ” ” is displayed. ( 16)
Network setting for the first time using app
1 Press [NWP ]/[CD ] to turn this unit on. · “Wi-Fi Setup” is displayed.
2 Press [ ], [ ] to select “Yes” and press [OK]. · “Setting” is displayed.
(Using Google Home app) 3 Open the Google Home app and
follow the on-screen instructions to set up a connection. ( 16)
(Using Apple Home app) 3 Open Apple Home app and follow
the on-screen instructions to set up a connection. ( 16)
Note
· This unit will be displayed as “Technics-SL-
G700M2-” if the device name is not set. (“” stands for characters unique to each
set.) · You can check your network information (SSID,
MAC address and IP address) from the Google Home app or “Technics Audio Center” app. · Some items on the Google Home app are irrelevant to this unit. · When this unit is switched to standby mode and turned on before the Wi-Fi setting is complete, “Wi-Fi Setup” is displayed. Complete the Wi-Fi setting or set “Wi-Fi Menu” to “Off” to turn off the display.

English

Setting the network from the setup menu (When not using apps with this unit)
Using the WPS button
“WPS” If your wireless router supports WPS, you can set up a connection by pressing the WPS button. · A compatible wireless router may have the WPS
identifier mark. · Complete the settings within 2 minutes while
“WPS” is displayed. · When “Wi-Fi Setup” is displayed when turning
on this unit, press [ ] to cancel the network setting and start the setting again. 1 Press [NWP] or [CD]. 2 Press [SETUP]. 3 Press [ ], [ ] repeatedly to select
“Network” and then press [OK]. · When “Wi-Fi Menu” screen is displayed,
press [OK]. 4 Press [ ], [ ] to select “On” and then
press [OK]. (The wireless LAN function is enabled.) 5 Press [ ], [ ] to select “WPS Push” and then press [OK]. · “WPS” blinks. Complete step 6 within
2 minutes. 6 After “WPS” is displayed, press the
WPS button on the wireless router. Example:
· “Linking” blinks. · When the connection is established,
“Success” is displayed. – “Fail” may be displayed if the connection
was not complete. Try this method again from the setup menu. If “Fail” is still displayed, try other methods. 7 Press [OK] to exit the setting.

Basic
Using the WPS PIN code
“WPS PIN”
If your wireless router supports WPS, you can set up a connection by entering the WPS PIN code. · For details on how to enter the PIN code, refer
to the operating instructions of the wireless router. · Complete the settings within 2 minutes while “WPS PIN” and the PIN code are displayed. · When “Wi-Fi Setup” is displayed when turning on this unit, press [ ] to cancel the network setting and start the setting again. 1 Press [NWP] or [CD]. 2 Press [SETUP]. 3 Press [ ], [ ] repeatedly to select
“Network” and then press [OK]. · When “Wi-Fi Menu” screen is displayed,
press [OK]. 4 Press [ ], [ ] to select “On” and then
press [OK]. (The wireless LAN function is enabled.) 5 Press [ ], [ ] to select “WPS PIN” and then press [OK]. · The PIN code is displayed. Complete step 6
within 2 minutes. 6 Enter the PIN code into the wireless
router from PC, etc. · “Linking” blinks. · When the connection is established,
“Success” is displayed. – “Fail” may be displayed if the connection
was not complete. Try this method again from the setup menu. If “Fail” is still displayed, try other methods. 7 Press [OK] to exit the setting.
Note
· Depending on a router, other connected devices may temporarily lose their connection.
· For details, refer to the operating instructions of the wireless router.

(15) 15

Basic

Network settings (Continued)

Setting the network from the setup menu (When using apps with this unit)
1 Press [NWP] or [CD]. 2 Press [>INPUT<] to select “Chromecast
built-in”. 3 Press [SETUP]. 4 Press [ ], [ ] repeatedly to select
“Network” and then press [OK]. · When “Wi-Fi Menu” screen is displayed,
press [OK]. 5 Press [ ], [ ] to select “On” and then
press [OK]. (The wireless LAN function is enabled.) 6 Press [ ], [ ] to select “Wi-Fi Setup” and then press [OK]. · “Setting” is displayed.
(Using Google Home app) 7 Open the Google Home app and
follow the on-screen instructions to set up a connection.
(Using Apple Home app) 7 Open Apple Home app and follow
the on-screen instructions to set up a connection.
Using the Google Home app
“Wi-Fi Setup”
1 Open the Google Home app or Apple Home app and follow the on-screen instructions to set up a connection. · When the connection is established, “Success” is displayed. – “Fail” may be displayed if the connection was not complete. Try this method again from the setup menu. If “Fail” is still displayed, try other methods.
2 Press [OK] to exit the setting.
Note
· This unit will be displayed as “Technics-SL-
G700M2-” if the device name is not set. (“” stands for characters unique to each
set.) · You can check your network information (SSID,
MAC address and IP address) from the Google Home app or “Technics Audio Center” app. · Some items on the Google Home app are irrelevant to this unit.

Streaming music over the network
This unit is compatible with Chromecast-enabled apps. For detailed information of Chromecastenabled apps, visit: g.co/cast/apps You can also stream music files from the device on your network to this unit by using the “Technics Audio Center” app. Download and install the app from the website below. www.technics.com/support/
Preparation
· Complete the network settings. ( 13) (Make sure that the network is connected to the Internet.)
· Install the supported application on your device. · Connect the device to the network currently
used at home.
1 Start the Chromecast-enabled app, AirPlay-enabled app or “Technics Audio Center” app on your device (smartphone, tablet, etc.), and select this unit as the output speaker.
2 Play back the music.
Not all music streaming services are available in all countries/regions. Registration/ subscription may be required, or fees may be charged to use music streaming services. Services are subject to change or be discontinued. For details, visit an individual music streaming service’s website.
Important notice: Before you dispose of or transfer this unit to a third party, be sure to log out of your music streaming services accounts to prevent unauthorized use of your accounts.

16 (16)

Playing back CD/SACD

1 Press [NWP ]/[CD ] to turn this unit on.

2 Press [ ] to open the disc tray and insert a CD.

Place label up in the proper position in the middle of the disc tray.

12 cm CD

DO

DO NOT

8 cm CD

DO

DO NOT

· Press [ ] again to close the disc tray.
3 Press [ ].
Note
· Be careful not to get your finger caught in the disc tray when opening/closing it.
Repeat Playback
Press [CD]. Press [ ].
“1 “: Only plays the selected track.
” “: All tracks are repeated.
Random playback
Press [CD]. Press [RND]. · Press again to cancel.
Program playback
Press [CD]. Press [PGM] in the stop mode. · “Program Mode” screen is displayed. Press the numeric buttons to select tracks. · Repeat this step to make further selections. Press [ ] to start playback. · Press [ ] or [ ] in the stop mode to check the
programed order. · Press [CLEAR] in the stop mode to clear the
last track. · Press [PGM] in the stop mode to cancel the
program mode, and the program memory will be stored. · Press [ ] in the stop mode and select “Yes” to cancel the program mode. (The program memory will be cleared.)
Note
· The program memory will be cleared in the

Playback

Basic

English

following conditions. – When turning on/off this unit – when replacing the CD – when switching the layer · The program mode is cancelled when the random playback is set.

Playing back Hybrid Super Audio CDs
Hybrid Super Audio CD discs include a conventional CD layer along with the Super Audio CD layer. Although Super Audio CD layer is preferentially played back, you can select the CD layer or Super Audio CD layer for playback by pressing [CD] while the playback stops.
Note
· The layer cannot be selected on the disc except Hybrid Super Audio CD discs.
· “Super Audio CD” is displayed as an input source while Super Audio CD is played back.

Compatible CD
· A disc with the CD Logo.
· This unit can play back discs that conform to the CD-DA format.
· The unit may not be able to play some discs due to the condition of the recording.
· Before playback, finalize the disc on the device it was recorded on.

CDs that cannot be used
· CDs with irregular shapes, such as heart shapes (Use of such CDs may cause malfunction.)

CDs that are not guaranteed to operate
with this unit
· Discs with illegally copied data and those that do not conform to industry standards
· DualDiscs (Discs that record data such as music and images on both sides)

Disc formats supported by this unit

Super Audio CD (SACD)
Commercially available CDs (CD-DA) CD-R/CD-RW (CD-DA)

Support (2-channel only)
Support
Support

This unit’s lens
Use the lens cleaner (not supplied) to clean the unit’s lens.

Clean discs
DO

DO NOT

Wipe with a damp cloth and then wipe dry with a dry cloth.
(17) 17

Basic

Playback (Continued)

Disc handling precautions
· Handle discs by the edges to avoid inadvertent scratches or fingerprints on the disc.
· Do not attach labels or stickers to discs. · Do not use disc cleaning sprays, benzine,
thinner, static electricity prevention liquids or any other solvent. · Do not use the following discs: – Discs with exposed adhesive from removed
stickers or labels (rented discs, etc.). – Discs that are badly warped or cracked. – Irregularly shaped discs, such as heart shapes.
Incorrect display or play does not start. · Make sure that the disc is compatible with this
unit. · There is moisture on the lens. Wait for about an
hour and then try again. · Unfinalized CD-R and CD-RW cannot be played
back. Playback takes time to start. · It may take some time for the disc to load if
there are a lot of tracks on it.
Pure Disc Playback
By disabling the network functions, etc. this unit operates exclusively for the playback of CD/SACD for the higher quality sound.
Press [CD] for 5 seconds or longer. · A confirmation screen appears. Press [OK]. Press [ ], [ ] to select “Yes” and then press [OK].
Note
· This unit is not displayed as the output speakers on “Technics Audio Center” app, etc. after setting.
· Press [CD] again for 5 seconds or longer to cancel and return to the normal mode.
· Playback of the online music streaming services, music files from network devices, etc. cannot be available while “Pure Disc Playback” is enabled.
· The display is turned off by dimmer function after setting “Pure Disc Playback” to “On”. Press [DIMMER] repeatedly to switch the brightness. ( 11)
Playing back music stored on the USB device
Connect a USB device to the USB-A terminal (USB-A Front/USB-A Rear) on the front/rear of this unit. ( 09, 10) Press [NWP] or [CD]. Press [>INPUT<] repeatedly to select “USB-A Front”/”USB-A Rear”.
18 (18)

Press [ ], [ ] to select an item and then press [OK]. · Repeat this step to make further selections. · Press [RETURN] to return to the previous
folder. · Random/repeat playback can be set. ( 17)
Using Bluetooth®
You can listen to the sound from the Bluetooth® audio device from this unit wirelessly.
Pairing a Bluetooth® device
Turn on the Bluetooth® feature of the device and place the device near this unit. (If a Bluetooth® device is already connected, disconnect it.)
Press [NWP] or [CD]. Press [>INPUT<] repeatedly to select “Bluetooth”. · When “Pairing” is indicated on the display,
proceed to step 6. Press [MENU]. Press [ ], [ ] repeatedly to select “Pairing” and then press [OK]. Press [ ], [ ] to select “Yes” and then press [OK]. · “Pairing” is displayed, and this unit waits for
registering.
Select “Technics-SL-G700M2-****” from the
Bluetooth® device’s menu. · If the device name is set on the Google Home
app, the set name is displayed.
Decoding MQA source
This unit includes the MQA (Master Quality Authenticated) technology, which enables playback of MQA audio files and streams, delivering the sound of the original master recording. For details, refer to “Operating Instructions”. To deliver the master quality audio of an MQA source, MQA decoding function needs to be set to “On”. Switch the MQA decoding function to “On” or “Off” in the following steps. · The default setting is “On”.
Press [MQA]. · “MQA Decoding : On” is displayed and the
MQA decoding function is set to “On”. (Press again to set the function to “Off”.) Play back the MQA source. · When only using the analog audio, set “Digital Output” to “Off” for better sound quality of MQA content playback.

The Wi-Fi CERTIFIEDTM Logo is a certification mark of Wi-Fi Alliance®. The Wi- Fi Protected SetupTM Logo is a certification mark of Wi-Fi Alliance®.
Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple and AirPlay are trademarks of Apple Inc., registered in the U.S. and other countries. This product is compatible with AirPlay 2. iOS 11.4 or later is required.
Google, Google Home, and Chromecast builtin are trademarks of Google LLC. Google Assistant is not available in certain languages and countries. Windows is a trademark or a registered trademark of Microsoft Corporation in the United States and other countries. Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. This product is protected by certain intellectual property rights of Microsoft Corporation and third parties. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary and third parties. Mac and OS X are trademarks of Apple Inc., registered in the U.S. and other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Holdings Corporation is under license. Other trademarks and trade names are those of their respective owners. “Super Audio CD” is a registered trademark.

Licenses
SBM Direct is a registered trademark. “DSD” is a trademark of Sony Corporation. FLAC Decoder Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Josh Coalson Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: – Redistributions of source code must retain
the above copyright notice, this list of conditions and the following disclaimer. – Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. – Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The Spotify Software is subject to third party licenses found here: https://www.spotify.com/ connect/third-party-licenses.
MQA and the Sound Wave Device are registered trade marks of MQA Limited © 2016
(19) 19

English

Specifications

GENERAL
Power supply Power consumption Power consumption in standby mode (Network Standby Off) Power consumption in standby mode (Network Standby On)*1
Dimensions (W×H×D)
Mass Operating temperature range Operating humidity range

AC 120 V, 60 Hz 45 W
0.2 W
2.0 W
430 mm (16 15/16″) × 98 mm (3 7/8″) × 407 mm (16 1/32″) Approx. 12.3 kg (27.2 lbs) 5 °C to 35 °C (41 °F to 95 °F) 35% to 80% RH (no condensation)

*1: Wired LAN or Wireless LAN

ANALOG OUTPUT SECTION

Channel

2 ch

Output level BALANCED

2.2 Vrms (Super Audio CD) / 2.2 Vrms (CD)

UNBALANCED

2.2 Vrms (Super Audio CD) / 2.2 Vrms (CD)

Frequency response
Super Audio CD

2 Hz to 50 kHz (-3 dB)

CD

2 Hz to 20 kHz (-3 dB)

THD+N

Super Audio CD 0.0006% (1 kHz, 0 dB)

CD S/N (IHF-A)

0.0015% (1 kHz, 0 dB)

Super Audio CD

BALANCED: 121 dB UNBALANCED: 118 dB

CD

BALANCED: 121 dB UNBALANCED: 118 dB

Dynamic range (IHF-A)
Super Audio CD

BALANCED: 110 dB UNBALANCED: 110 dB

CD

BALANCED: 98 dB UNBALANCED: 98 dB

20 (20)

DISC SECTION
Disc played (8 cm (3″) or 12 cm (5″)) Pick up
Wavelength
Laser power Audio Output (Disc) Format

Super Audio CD (2ch area only), CD, CD-R, CD-RW
650 nm (Super Audio CD), 790 nm (CD) CLASS 1 2ch (FL, FR) Super Audio CD, CD- DA

Bluetooth® SECTION

Bluetooth® system specification Wireless equipment classification

Bluetooth® Ver.4.2 Class 2 (2.5 mW)

Supported profiles A2DP, AVRCP

Supported codec AAC, SBC

Frequency band

2.4 GHz band FH-SS

Operating distance

Approx. 10 m (33 ft) Line of sight*2

*2: Prospective communication distance.
Measurement environment: Temperature 25 °C (77 °F)/ Height 1.0 m (3.3 ft) Measure in “Mode 1″

TERMINALS SECTION

Headphones Jack

Stereo, 6.3 mm (1/4″)
110 mW, 32 (VOL MAX) Type A Connecter

USB 2.0 High Speed

USB (Front/Rear) DC 5 V 500 mA (Front)

DC 5 V 1 A (Rear)

File system USB-B (PC)
Ethernet interface
Digital Input Optical digital input Coaxial digital input Format support
Analog output BALANCED UNBALANCED
Digital output Optical digital output Coaxial digital output Format support
System port System control

USB Mass Storage Class FAT16, FAT32, NTFS Rear, Type B Connecter LAN (100BASE- TX/10BASE-T)
Optical terminal
Pin jack LPCM
3 pin XLR Pin jack
Optical terminal
Pin jack LPCM
3.5 mm (1/8”), Jack

FORMAT SECTION
USB-A

USB Standard

USB 2.0 high-speed USB Mass Storage class

USB-B USB Standard DSD control mode

USB 2.0 high-speed
USB Audio Class 2.0, Asynchronous mode ASIO Native mode, DoP mode

Wi-Fi SECTION
Standard
Frequency band
Security WPS version

IEEE802.11a/b/g/n/ac 2.4 GHz band
5 GHz band WPA2TM Version 2.0

· The WLAN feature of this product shall exclusively be used inside buildings.

English

Format
This unit supports the following formats. · This unit does not support the playback of copy-protected music files. · Playback of all files in formats supported by this unit is not guaranteed. · Playback of a file in a format not supported by this unit may cause choppy audio or noise. In such cases,
check to see if this unit supports the file format. · This unit does not support VBR (Variable Bit Rate) playback. · Some of the connected devices or servers may be capable of converting files in formats not supported by
this unit and output them. For details, refer to the operating instructions for your devices or servers. · File information (sampling frequency, etc.) shown by this unit and playback software may differ from each
other. · Depending on PC, application, etc., the content may not be played back even though the sampling
frequency is supported. Check the PC, application, etc., to play back properly.

Extension

Sampling frequency

MP3 AAC
WAV

.mp3 .m4a/.aac
.wav

FLAC .flac

AIFF .aiff

ALAC .m4a DSD .dff/.dsf PCM

32/44.1/48 kHz 32/44.1/48/88.2/96 kHz 32/44.1/48/88.2/96/ 176.4/192/352.8/384 kHz 32/44.1/48/88.2/96/ 176.4/192/352.8/384 kHz 32/44.1/48/88.2/96/ 176.4/192/352.8/384 kHz 32/44.1/48/88.2/96/ 176.4/192/352.8/384 kHz 2.8/5.6/11.2 MHz 32/44.1/48/88.2/96/ 176.4/192/352.8/384 kHz

Bit rate/ Number of quantization bits 16 to 320 kbps 16 to 320 kbps 16/24/32 bit 16/24 bit 16/24/32 bit 16/24 bit
16/24/32 bit

USB-A

USB-B

LAN (DMP/ DMR)*3

*3: Whether or not each music file can be played back over your network is determined by the network
server even if the format of the file is listed above. For example, if you are using Windows Media Player 11, not all music files on the PC are playable. You can play back only those added to the library of Windows Media Player 11. Note
· Specifications are subject to change without notice. · Mass and dimensions are approximate.

(21) 21

Limited Warranty (ONLY FOR U.S.A.)

Technics Products ­ Limited Warranty

Limited Warranty Coverage (For USA Only) If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor.

Product or Part Name

Parts

Labor

Technics Network/ Super Audio CD Player

3 (three) years

3 (three) years

During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States. This warranty is extended only to the original purchaser of a new product which was not sold “as is”. Mail-In Service–Online Repair Request

Online Repair Request To submit a new repair request and for quick repair status visit our Web Site at http://shop.panasonic.com/support
When shipping the unit, carefully pack, include all supplied accessories listed in the Owner’s Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at http://shop.panasonic.com/support as Panasonic is committed to providing the most up to date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty.

IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.

Limited Warranty Limits and Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to:
Panasonic Corporation of North America Consumer Affairs Department 8th Fl. Two Riverfront Plaza Newark NJ 07102-5490 PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.
for all your Technics gear Go to
http://shop.panasonic.com/support Get everything you need to get the most out of
your Technics products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Batteries,
Backup Chargers & more… Customer Services Directory For Product Information, Operating Assistance, Parts, Owner’s Manuals, Dealer and Service info go to http://shop.panasonic.com/support
For the hearing or speech impaired TTY: 1- 877-833-8855
As of October 2022

The model number and serial number of this product can

be found on either the back or the bottom of the unit.

Please note them in the space provided below and keep for

future reference.

MODEL NUMBER

SL-G700M2

SERIAL NUMBER

22 (22)

User memo: DATE OF PURCHASE DEALER NAME DEALER ADDRESS
TELEPHONE NUMBER

Limited Warranty (ONLY FOR CANADA)

Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3
TECHNICS PRODUCT ­ LIMITED WARRANTY

Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by Panasonic Canada Inc.

Technics Network/Super Audio CD Player

3 (three) years parts and labour

This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Technics brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original packaging. IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIRED LIMITATIONS AND EXCLUSIONS This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than an Authorized Servicer, or damage that is attributable to acts of God. Dry cell batteries are also excluded from coverage under this warranty. THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is not exhaustive, but for illustration only.) In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you specific legal rights and you may have other rights which vary depending on your province or territory.

WARRANTY SERVICE For product operation, repairs and information assistance, please visit our Support page on:
www.panasonic.ca/english/support

IF YOU SHIP THE PRODUCT TO A SERVICENTRE Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.

English

(23) 23

Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 http://www.panasonic.com
© Panasonic Corporation 2022 Printed in Malaysia Imprimé en Malaisie

Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 www.panasonic.com

En Cf
TQBM0857 M1022YY0

References

• Panasonic - Official Consumer Product Support
• Adobe - Download Adobe Acrobat Reader
• Panasonic - Official Consumer Product Support
• Panasonic Australia | Air Con | Cameras | Home Appliances
• Support | Technics
• Operating Instructions | Downloads | Technics
• Firmware Update | Technics
• Home app - Apple
• Spotify - Web Player: Music for everyone

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>