MeTra 120 70-7554 Receiver Wiring Adaptor Owner’s Manual
- June 3, 2024
- Metra
Table of Contents
MeTra 120 70-7554 Receiver Wiring Adaptor
IMPORTANT
Before starting, compare items on your invoice with items received. Thoroughly
check packing materials. If an item is missing, please call Crutchfield at
1-888-955-6000.
MATCH & CONNECT WIRES
- Match wires below to the matching function of each wire on your receiver (refer to instructions supplied with receiver). The wire colors of your new receiver may, or may not, match the wire colors of the adaptor. Match adaptor and receiver wires by function, disregarding color.
- Individually tape off any unused wires.
- Connect your receiver’s ground wire directly to a grounding point on your vehicle’s chassis.
- Make final wiring connections following instructions on the next page.
Receiver Wiring Adaptor Connections
CRIMP CONNECTIONS
Tools & Parts Required
CONTINUED
- Complete crimp connections for all necessary wires.
- Be sure to wrap any wires from the Wiring Adaptor that are not necessary (wires with no match from the new receiver) with electrical tape.
APPLICATION
When ready to install the receiver, plug the Wiring Adaptor from the new receiver or receiver assembly into the factory radio harness(es) in the vehicle dash.
Read User Manual Online (PDF format)
Loading......