VAXIS A5 Wireless Monitor User Guide

: June 3, 2024
: Vaxis

Table of Contents

VAXIS A5 Wireless Monitor
Ports
User Interface
APP Monitoring
Specification
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VAXIS A5 Wireless Monitor

Ports

VAXIS A5 Wireless Monitor-1

Shortcut
Power Button
HDMI Output
HDMI Input
3.5mm Audio Jack
DC Input
TF Card Slot
USB-C Port
NPF-970 Battery Plate
SMA Antenna Connector

User Interface

VAXIS A5 Wireless Monitor-2

Common Buttons

Main Menu

VAXIS A5 Wireless Monitor-4

Transmitter & Receiver Switching

Select the Signal Menu – Wireless Mode interface, switch TX or RX mode according to your needs, and the current status will be displayed in the status bar at the bottom.

Record & Replay

Click Record in the bottom right corner to record the current screen.

Record & Replay

VAXIS A5 Wireless Monitor-7

LUT Loading

Put the LUT file into the TF card (LUT format is *.cube, support 17x17x17 and 32x32x32),select the import button

LUT Loading

Select the LUT in the TF card and click import, it will be prompted that the current LUT
shortcut key can be overwritten during import. If the LUT shortcut key is not currently
selected, it will be loaded into the monitor (the monitor can save up to 50 LUTs).

You can only delete the LUT in the monitor, the LUT on the shortcut key cannot be deleted. You need to restore the factory setting, or select a new LUT to overwrite.
The LUT in the TF card also cannot be deleted, the only option is to format the memory card.

APP Download

Search Vaxis Vision on App Store or Google Play to download the IOS, Android, Ipad application.

Then open the mobile App to Connect Device, select Scan Code to connect
Click Wireless Information in the Signal Menu of A5
Scan the QR code to connect

APP Monitoring

Enter the Settings System Information interface, select Wireless Information
Then open the mobile App to Connect Device, select Scan Code to connect,and scan the QR code on the monitor to Connect.

Pairing

Enter the Signal Menu – WirelesS Information intertace, click the pairing button both on TX & RX simultaneously to pair. The pairing method is the same in TX or RX mode.

f it shows unpaired after Scanning the QR code, it means that the current A5 has never been paired after reset. If it shows paired, it proves that a device has been paired with it.

Firmware Upgrade
Put the upgrade folder into the top directory of the TF card(format FAT-32). Open Setting – System – Software Upgrade, if there is a prompt whether to upgrade the software, the upgrade folder has been successfully read. Click Yes to perform firmware upgrade.

Specification

Interface| DC IN,

HDMI IN, HDMI OUT,

3.5mm Audio Jack, Type-C

---|---
Input Voltage| NPF970/DC1 2V
Screen Size| 5.5 Inch Touch
Screen Resolution| 1920*1080 pixels
Screen Brightness| 1000cd/m’
Contrast Ratio| 1200 : 1
| ****

1920* 1080P 60/59.94/50/30/29.97/25/24/23 98