VAXIS 058 Pro Storm Wireless Monitor Mount Instruction Manual
- June 1, 2024
- Vaxis
Table of Contents
VAXIS 058 Pro Storm Wireless Monitor Mount
EU Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or
retailer for recycling advice.
Important Information
Please read this user manual before you use this product, it contains all the notes and important things regarding operating this product. By the safety precautions and operating instructions listed in this user manual, our applies provided the product is handled properly for its intended use, but may not apply to the below cases:
- Repairs or product modification and alterations have been executed by unauthorized personnel.
- The damages are caused by accidents including but not limited to lightning, fire, exposure to rain or water, and moisture.
- Do not use a provided power adapter with a specific power voltage that is not compliant with the rated voltage range in the attached label of the power adapter in the package.
- The model label on the product has been modified or the warranty tag has been removed by unauthorized personnel.
Safety Precaution
Danger: Be careful with electricity.
- When connecting any equipment (such as any player TV, etc.), please turn off the power to the product before any operation is undertaken.
- Power outlet: To prevent electric shock fire or short circuit, please make sure the type of electrical plug used on the receiver’s and transmitter’s power cord is compliant with the rated voltage range in the attached label of the power adapter in the package.
- Power cord: Do not place any heavy articles above the power cord. To avoid being stepped on or pinched by heavy items, the power cord should not be located in the place where people pass by frequently.
- Power overloading: Avoid overloading the wall’s electrical outlets and extension cord or other multi-socket; otherwise could result in electric shock or fire.
- Lightning: For protection from lightning or when the product is left unattended for a long period, please disconnect it from the power source.
- Please disconnect the power cord from the power outlet when you are not using the receiver and transmitter, this will reduce the risk of electric shock or fire.
Warning
- This product should not be exposed to dripping or splashing. Do not place any object filled with liquid on the product(eg. vases).
- To avoid electric shock, please do not block or stick anything on the air vent of the product; do not remove the cover or put objects just as pins, or steel wire into the gap of the air vent.
- Please place the receiver/ transmitter on a flat hard and stable surface.
- Ventilation: please do not block the air vents on the receiver/transmitter or place any heavy object on top of them. Blocking the airflow can damage the product itself. Please make sure that there is adequate ventilation distance between the receiver and TV, and also put the product away from direct sunlight or any source of heat.
- Water Exposure: To reduce the risk of electric shock or fire, please do not expose the receiver/transmitter to rain or moisture.
- We assume no responsibility for any damage or result caused by using other adapters instead of our standard adapters
Special Notice
- Although the product has provided the function of data encryption when transmitting, you still need to pay attention to deliberate signal interception. There will be the Possibility of a third party intentionally intercept the transmission signal since the product adopt wireless communication. Please do not use the product on confidential and important communications, or life-related communications The main concern is that the content of wireless communication might be received by the third party’s wireless devices deliberately or accidentally.
- The impact of radio waves (such as the following environment may cause abnormal audio and video(blocked image, noise … etc.).
- Transmit near the wall which is hard for the radio waves to get through.
- Quite close to the refrigerator, metal fitment and appliances, or next to the crowded situation.
- This product has been tested and manufactured to comply with national electrical safety rules, however, there will be noise caused by interference with other machines in rare cases. If the interference happens, please keep a certain distance away from other machines.
- The product is susceptible to interference from 5GHz wireless local area networks or other wireless devices.
- The optimal range between transmitter and receiver is between 1 meter and 50 meters within line of sight indoors.
- Please do not set up the transmitter and receiver on a metal shelf, or it will hinder wireless communications.
- 10S0P/60 Hz Wireless transmitting.
- It will take 15-20 seconds to boot the system before wireless communication starts, the media receiver can not be operated during this time.
About the User Manual
- Please read this manual carefully before you use this product and retain it properly for future reference.
- If there is any question or difficulty about the operation of the product, please feel free to contact us or the dealer.
- The company reserves the authority to modify the instruction manuals.
Overview
A wide variety of advanced features is included, such as 3D Lut Import, Waveform, Vectorscope, Brightness Histogram, Audio Meters, Focus Assist, False Color, Zebra, Single Color, Freeze, Zoom, Anamorphic, etc. PRO VUE is a more reliable, professional and portable wireless monitor kit. Paired with the Movcam follow focus system, the critical follow focus information will be displayed as overlays directly on the monitor. allowing camera assistants to focus and keep their eyes on the image. The bright (1500 nits) and lightweight (405g) monitor brings you the most vivid productions.
Features
- 5.5-inch Full HD touchscreen, 1500 nits brightness
- Zero-latency video transmission
- Transmission range up to 200 m/ 650 ft(Line-of-Sight)
- Support HOR, 3D LUT import & video analysisi functions
Packing List
Please check the packing list carefully after unpacking, if any part is
missing, please contact the dealer. 
- Since the product’s improving process, all the performance, design and accessories of our products are subject to minor change without prior notice.
Monitor Interface Description
For Monitor
- Install the V -Lock battery
Monitor Menu Operation
False Color : Tap on the screen to access the settings menu, then select False Color to do the relevant settings.
Zebra: Tap on the screen to access the settings menu, then select Zebra to do the relevant settings.
Brightness Histogram : Tap on the screen to access the settings menu, then select Brightness Histogram to do the relevant settings.
RGB Histogram : Tap on the screen to access the settings menu, then select RGB Histogram to do the relevant settings.
Luminance Waveform: Tap on the screen to access the settings menu, then select Luminance Waveform to do the relevant settings.
RGB Waveform: Tap on the screen to access the settings menu, then select RGB Waveform to do the relevant settings.
Vectorscope: Tap on the screen to access the settings menu, then select Vectorscope to do the relevant settings.
All Wave: Tap on the screen to access the settings menu, then select All Wave to do the relevant settings.
HOR: Tap on the screen to access the settings menu, then select HDR to do the relevant settings.
Single Color: Tap on the screen to access the settings menu, then select Single Color to do the relevant settings.
Peaking: Tap on the screen to access the settings menu, then select
Peaking to do the relevant settings.
Center Mark: Tap on the screen to access the settings menu, then select
Center Mark to do the relevant settings.
Safe Area: Tap on the screen to access the settings menu, then select
Safe Area to do the relevant settings.
Mark Ratio: Tap on the screen to access the settings menu, then select
Mark Ratio to do the relevant settings.
Grid Lines: Tap on the screen to access the settings menu, then select
Grid Lines to do the relevant settings.
Audio Meters: Tap on the screen to access the setting menu, then select
Audio Meters to do the relevant settings.
LUT: Tap on the screen to access the settings menu, then select LUT to do
the relevant settings.
Anamorphic: Tap on the screen to access the settings menu, then select
Anamorphic to do the relevant settings.
Display Flip : Tap on the screen to access the settings menu, then select Display Flip to do the relevant settings.
Backlight : Tap on the screen to access the settings menu, then select Backlight to do the relevant settings.
Screen : Tap on the screen to access the settings menu, then select
Screen to do the relevant settings a set.
Colour Temperature : Tap on the screen to access the settings menu, then
select Color Temperature to do the relevant settings.
Language : Tap on the screen to access the settings menu, then select
Language to do the relevant settings.
Specification
| ITEM | SPECIFICATION |
|---|---|
| Bandwidth | 40MHz |
| **** |
1080p(23.98/24/25/30/50/60Hz),
| 1080p(23.98/24/25sF),
Video Formats| 1080i(50/59.94/60Hz),
720p(50/59.94/60Hz),
| 576p, 576i, 480p, 480i
Audio Formats| PCM
Transmission
Range
| 200 m (Line-of-Sight)
Resolution| 1920×1080
Brightness| 1,500 nits
Contrast| 1000:1
Viewing Angle| 178° ( H/V)
Backlight| LED
Antenna| Built-in antennas
Receiving Sensitivity| -70dBm
Operating Voltage| 7-36 V DC
Power Consumption| 15W
Temperature| -10 – 50°C (Operating); -40 – 80°C (Storage)
Troubleshooting
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
(Example use only shielded interface cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. This equipment complies
with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Cautions!
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void
the user’s authority to operate the equipment.