PreSonus Revelator io24 2 Channel Audio Interface User Guide

Revelator io24
2-channel audio interface for streamers and podcasters
Quick Start Guide

Hookup

Added bonus: PreSonus’ previously Top Secret recipe for…
Fantastic Vegan Gumbo
Ingredients:

• 80ml all-purpose flour
• 70 ml vegetable oil (e.g. high heat sunflower oil)
• 1-2 onions (diced)
• 2 celery stalks (diced)
• 1 green bell pepper (diced)
• 3 cloves garlic (minced)
• 1 liter of vegetable broth
• 1 handful of okra, cut into pieces
• 1 red bell bell pepper, cut into pieces
• 250g mushrooms, cut into pieces
• 1 cauliflower, cut into florets
• PreSonus “Sweet Darlin‘“ Cajun Dry Rub
• salt
• thyme
• smoked paprika
• paprika (hot)
• black pepper
• 2-3 bay leaves
• parsley, finely chopped
• spring onion, finely chopped

Cooking Instructions:

1. Make a roux: heat the oil in a pan set to medium heat. and stir in the flour. Slowly add flour 1-2 Tbsp at a time, stirring continuously. Continue cooking and stirring the roux until it is a dark brown (it should look like melted chocolate—milk or dark chocolate is a question of taste and patience.) Be careful to not let the oil get too hot, or the flour will burn and you’ll have to start over! It’s best to work with the heat set to medium and your patience set to high.

2. Once roux has reached the desired color, add the onions, peppers and celery; stir well. After a few moments, add the garlic and fry briefly. Then add the broth and bring to a boil.

3. Add bay leaves and okra, and season to taste with the spices. Simmer on lowest heat for about one hour.

4. In the meantime, place cauliflower, red bell peppers and mushrooms on a baking sheet. Drizzle with oil and sprinkle with Sweet Darlin‘. Brown in the oven at approx.
   220°C.

5. Add the vegetables to the stew and simmer a little more, or turn off the heat and let it sit for a few hours (Like any stew, it gets better overnight.)

6. Serve with rice and sprinkle with green onion and parsley. Season to taste with Tabasco (or other hot sauce).

Basic functions

Press channel 1 or 2 button to select channel. Press encoder to cycle through settings.
Turn encoder to change chosen setting.

Tap Preset to cycle through sound presets. Press and hold Preset to turn presets off or on.

From Home screen, press Encoder to cycle through control of Headphone volume, Main volume, or monitor blend. Turn encoder to adjust the selected parameter.

© 2021 PreSonus Audio Electronics, Inc. All Rights Reserved. PreSonus is a registered registered trademarks of PreSonus Audio Electronics, Inc.
Other product names mentioned herein may be trademarks of their respective companies. All specifications subject to change without notice.

1. Combo input jacks. Suitable for XLR, Line, or Instrument connections.
2. Channel Select Buttons. Press to display information about Input 1 or input 2 on screen (3).
3. Screen. Displays metering, preset selection, and other important information.
4. Back Button. Returns display on screen (3) to default Home view.
5. Preset Selectors. Cycles through presets for inputs 1 and 2, respectively. Press to cycle through Presets; press and hold to bypass Presets.
6. Multipurpose Encoder. Controls many parameters. From Home screen, press it to cycle through controlling Headphone volume, Main volume, or monitor blend. From Channel screen, press it to cycle through +48v, gain, and high-pass filter options. Rotate Encoder to adjust the selected parameter.
7. Mute. Enables/Disables the Main Outs.
8. Kensington Lock. Connect this port to a Kensington lock to prevent theft.
9. USB-C. Connect USB-C to USB-A cable (included) to your computer or USB power source.
10. MIDI In/Out. Connect to external MIDI controllers like keyboards for control of virtual instruments in Studio One.
11. Main Out. Balanced 1/4” TRS outputs for speakers or power amp.
12. Headphone Output. The rear-panel headphone output mirrors the same streams as the Main left/right outputs.

Install Universal Control

 Once you have registered your Revelator io24, download Universal Control from your MyPreSonus account—Universal Control unlocks all of Revelator io24’s advanced features.

1. Install Universal Control on your computer.
2. Mac Users. Open Universal Control and choose Single or Multi Device Mode.
   Windows Users. Multi mode is always enabled.

Install Studio One

1. Download the Studio One Artist installer from your My PreSonus account and install it on your computer.
2. Launch Studio One Artist and enter your My PreSonus credentials. Follow the onscreen instructions to activate.

 Start Recording!

1. Click “New Song.”
2. Select the “Podcast Production” template and click “OK.”
3. Click record arm on the blue “Host” track.
4. While watching the meters in Studio One, speak into your microphone and use Revelator io24 to set your microphone input level.
5. Click Record in Studio One.
6. To play back, click the Stop, Return to Zero, and Play to listen back to your recording.
   But wait! Your Revelator io24 can do so much more! Visit www.presonus.com to download you user manual and watch helpful videos about all the things you can do from Universal Control including:
   • Create custom voice presets
   • Create mixes for multi mode
   • And more!

Serves 3-4
18011 Grand Bay Ct. Baton Rouge,
Louisiana 70809 USA
1-225-216-7887
www.presonus.com
Part# 70-12000164-A

References

• PreSonus | Wherever sound takes you.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>