niko 353-600121 Presence Detector Instruction Manual
- June 4, 2024
- niko
Table of Contents
Manual
Presence detector
353-600121
Presence detector P42MR, 230 V, master, 12-13 m, 360°, for flush-mounting box
Wiring
230 V – OFF
- remove if you want to use the contact as a dry contact (potential-free)
Dimensions
Installation
230 V – OFF
App settings
230 V – ON
LED behaviour
230 V – ON
Green LED continuous on| | Connection OK|
---|---|---|---
Green LED breathing| | Connection OK, overrule ON|
Green LED flashing| | Warming up| Wait
Red LED continuous on| | Error|
More info –>
Red LED breathing| | Warning
Blue LED flashing| | Walk test active
Specifications
| Article number | 353-600121 |
|---|---|
| Configuration | 230 V Master |
| Input voltage | 230 Vac ± 10 %, 50 Hz |
| Maximum power consumption | 0.2 W |
| Relay contact | NO (max. µ10 A), potential-free |
| Maximum load incandescent and halogen lamps (cosφ | 2300 W |
| Maximum load fluorescent lamps (cosφ ≥ 0.5) | 1200 VA |
| Maximum load economy lamps (CFLi) | 350 W |
| Maximum load LED lamps 230 V | 350 W |
| Maximum load LED driver | 500 VA |
| Maximum load electronic transformer | 500 VA |
| Maximum capacitive load | 140 µF |
| Maximum switching current | 165 A/20 ms or 800 A/200 µs |
| Light intensity range | 20 – 2000 lux, ∞ |
| Number of channels | 1 channel |
| Maximum number of secondary detectors | 10 |
| Switch-off delay | pulse, 15 s – 120 min, ∞ |
| Hysteresis on light intensity | 10% |
| Detection angle | 360° |
| Detection range (PIR) | Ø 12 m from a height of 3 m |
| Ambient temperature | -25 – +40 °C |
| Mounting method | flush-mounting box |
| Mounting height | 2 – 3.5 m |
| Colour | white (RAL 9010) |
| Dimensions visible (HxWxD) | 100 x 100 x 9.5 mm |
| Dimensions (HxWxD) | 100 x 100 x 44.5 mm |
| Wire capacity | 1.5/2.5 mm² |
| Maximum range Bluetooth ® (free field, depending on the device) | 50 m |
| Operating frequency | 2.4 GHz |
| Maximum radio frequency power | -2 dBm |
| Protection degree | IP20 |
| Impact resistance | IK02 |
| Modification of settings | app (iOS/Android) and 2-way Bluetooth® communication |
| Halogen-free | yes |
| Marking | CE |
Detection area
Troubleshooting
| Problem | Possible cause | Proposed solution |
|---|---|---|
| Load does not turn on | The wiring is not correct | Check the wiring scheme |
| The ambient light is too strong | Check the response value luminosity and raise |
the value if necessary
Load does not turn off| The switch-off delay is too long| Check the switch-off
delay and shorten the delay if necessary
The detector receives false triggers| Check for any objects that may cause
false triggering and remove them from the detection range or lower the
sensitivity
App cannot connect to the detector| Bluetooth ® has been disabled on your
mobile device| Enable Bluetooth ® on your mobile device
Support & contact
NV Niko sa Industriepark West 40 9100 Sint-Niklaas, Belgium
www.niko.eu
+32 3 778 90 80
support@niko.eu
Niko prepares its manuals with the greatest care and strives to make them as complete, correct and up to date as possible. Nevertheless, some deficiencies may subsist. Niko cannot be held responsible for this, other than within the legal limits. Please inform us of any deficiencies in the manuals by contacting Niko customer services at support@niko.eu.
PM353-600121R22203
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>