OLIGHT Baton 3 Stainless Steel LED Torch User Manual
- June 3, 2024
- OLIGHT
Table of Contents
USER MANUAL
Baton 3 Stainless Steel
Baton 3 Stainless Steel LED Torch
Thank you for purchasing this Olight Product. Please read this manual carefully before use and keep it for future reference!
IN THE BOX
SPECIFICATIONS
- All above specifications are test results based on ANSI/NEMA FL1-2009 Standard. The tests are performed using the battery included in the flashlight.
BATTERY INSTALLATION
Before first use, please unscrew the body and remove the insulating film. If the battery needs to be replaced, make sure that the positive end of the new battery faces the flashlight head when you put it in.
AVAILABLE BATTERIES
- 1 x customized 550mAh 3.7V IMR16340 rechargeable battery, not compatible with any other batteries
BATTERY LEVEL INDICATOR
NOTE: If using moonlight mode, the battery indicator will only display when the battery level is below 5%.
CHARGING
- Before first use please fully charge the product.
- Connect the USB end of the magnetic charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (best charging efficiency with a USB power source of no less than 5W (5V 1A) ).
The red indicator means charging, while the green indicator means charging complete.
DANGER
-
DO NOT separate the battery from the flashlight.
The rechargeable IMR battery included comes with a strong discharge current. If any external conductor causes a battery short circuit to occur, it will become hot or burn itself and could potentially cause an unpredictable disaster. -
DO NOT cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials.
-
DO NOT shine the light directly into human eyes.
This may cause temporary blindness, or permanent damage to the eyes.
WARNING
- Keep out of reach of children.
- When the flashlight is working on the high mode, the surface temperature can reach 50°C. Please switch off the flashlight temporarily or turn it to low mode.
- Please use turbo mode with caution. Turbo greatly reduces the runtime and leads to high temperature on the flashlight surface.
- DO NOT use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold.
- If the product is left unused or carried and transported, please lock the button to avoid accidentally activating the flashlight.
- Please keep the front lens clean. Due to radiation energy, it may heat up foreign matter on the lens which can potentially cause damage.
- The battery can only be stored inside the product and charged with the included specified charger.
- Store the battery with care. Please store the battery in a dedicated box after being taken out of the product if the battery needs to be changed. Keep it in a cool and dry place.
NOTICE
-
When the flashlight is turned off, the current mode will be memorized. The modes that can be memorized are: moonlight, low, medium, and high mode (after the light is turned off, the high mode will be memorized for 10 minutes before reverting to medium mode. If the light is turned off on turbo mode, the high mode will be memorized instead and will also revert to medium mode after 10 minutes (turbo mode can not be memorized).
-
Turbo will stay on for 1 minute and then step down to high mode within half a minute.
-
Moonlight and turbo mode are not the normal brightness levels (low, medium, and high mode).
Under moonlight and turbo mode, press and hold the switch to enter the normal brightness level cycle. -
When the product is used in a low-temperature environment, please try and keep it warm. If the temperature is too cold, it may not reach the highest output.
-
DO NOT short-circuit the copper pole in the center of the tailcap with the flashlight’s metal housing.
The short circuit in this case will result in an electric discharge of below 3mA between them, and may lead to a complete battery drain if it is in this state for too long.
EXCLUSION CLAUSE
Olight is not liable for damages or injuries sustained resulting from the
usage of the product inconsistent with the warnings in the manual, including
but not limited to using the product inconsistent with the recommended lockout
mode.
HOW TO OPERATE
ON/OFF: Single click the side switch to turn the light on/off. When the
light is turned on, it will return to the previous brightness level selected
before the light was turned off.
CHANGE BRIGHTNESS LEVEL: When the flashlight is on, press and hold the
side switch and it will, starting from the present brightness level,
automatically cycle through Low, Medium, and High mode. The mode is selected
when the side switch has been released. (Please note: moonlight and turbo are
not in the automatic cycle ).
MOONLIGHT: When the flashlight is off, press and hold the side switch for
over one second to access the moonlight mode.
DIRECT ACCESS TO TURBO: Quickly double press the side switch to activate
the turbo mode.
STROBE: When the flashlight is on, triple-click the side switch to
activate strobe mode. To quit this mode, single click or press and hold the
switch.
TIMER: The Baton 3 has a long (9 minutes) and short (3 minutes) timer
when the light needs to be automatically turned off. When the flashlight is
on, double click and hold the side switch under the current brightness level
to access the timer settings.
A single blink accesses the short timer while two blinks accesses the long
timer. The flashlight will automatically turn off when the timer is up. After
the timer is set, double click and hold the side switch to shift the timer
settings.
LOCKOUT/UNLOCK: When the flashlight is off, press and hold the side
switch (for about 2 seconds) to access the button lockout mode (the flashlight
will enter the moonlight mode first and will then switch off to signal the
lockout mode). Under the lockout mode, press and hold the switch for less than
one second without releasing it. The red indicator below the switch will be on
for a short time to signal that the light is still in a lockout mode. To
unlock it, keep holding switch for over one second until the
moonlight mode is on again.
WARRANTY
Within 30 days of purchase: Contact the original seller for repair or
replacement.
Within 5 years of purchase: Contact Olight for repair or replacement.
Battery warranty: Olight offers a one year warranty for all rechargeable
batteries.
MCC magnetic USB charging cable: One year.
For any of the fragile or low-value fittings not covered above, like lanyard
and clip, you can contact the post-sale within 30 days of the purchase, if it
has any quality drawback or damage under normal use condition. If such
drawback or damage occurs after 30 days of the purchase or under abnormal use
condition, we will only offer conditional
quality assurance as appropriate.
EU- DECLARATION OF CONFORMITY
https://olightworld.com/ec-declaration
EU-Declaration of Conformity can be found here:
https://olightworld.com/ec-declaration
USA Customer Support
[email protected]
Global Customer Support
[email protected]
Visit www.olightworld.com to see our complete
product line of portable illumination tools.
Dongguan Olight E-Commerce
Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial
Park, No 6 Zhongnan Road, Changan
Town, Dongguan City, Guangdong, China. A. 5, 18, 2022
3.4000.0441
Made in China
THANK YOU!
References
- Olight | Illuminate Your World.
- Flashlights, Tactical Light, Outdoor Tools - Olight Official Store- Olight