vtech RM5754HD Baby Monitor User Guide

RM5754HD Baby Monitor
User Guide

RM5754HD Baby Monitor

Applicable Models
RM5754HD, RM5764HD, RM7764HD, RM7767HD, VM901-1W
Connect and power on the baby monitor (For RM5754HD)

1. Connect the Parent Unit to the adaptor and mains supply.

2. Connect the respective Baby Unit to the adaptor and mains supply.

3. Switch the Baby Unit on.

Connect and power on the baby monitor (For RM5764HD, RM7764HD)

1. Connect the Parent Unit to the adaptor and mains supply.

2. Connect the Baby Unit to the adaptor and mains supply.
   

3. Switch the Baby Unit on.

Connect and power on the baby monitor (For RM7767HD)

1. Connect the Parent Unit to the adaptor and mains supply.

2. Connect the Baby Unit to the adaptor and mains supply.
   

3.  Switch the Baby Unit on.

Connect and power on the baby monitor (For VM901-1W)

1. Connect the Parent Unit to the adaptor and mains supply.

2. Connect the Baby Unit to the adaptor and mains supply.

3. Switch the Baby Unit on.

Connect to a Wi-Fi network

1. Press key on your Parent Unit, and select “Configure Wi-Fi” on the setting tab.

2. Select your Wi-Fi network.

3. Enter Wi-Fi password and select “Done”.
   

4. Check the status bar icons to make sure both Parent Unit and Baby Unit connect to the router.If these icons are displayed on the Parent Unit, please place both the Parent Unit and Baby Unit closer to the router, then power off and on the Parent Unit and repeat Steps 1-3.

Update the software (for early software versions)

1. After connecting the system to your Wi-Fi network, it will update in 4 hours. A pop-up message will appear on the monitor when the update is completed. Select “Now” and reboot the system.
   

2. Now you can enjoy a more enhanced connection. After updating, the connection is set to router  mode by default. Using router mode will allow you to receive future software updates when available.

Update the software (for recent software versions)

1. Press key on your Parent Unit, and select “Software Update” on the setting tab.
   

2. If there is new software available, the Parent Unit will ask you to install it. Press ”Done” and the Parent Unit will reboot for the update.

Further help
To see a video version of this set-up guide scan here:

https://vttqr.tv/?q=3VP03

For setting up the full range of your monitor’s features scan here:

https://vttqr.tv/?q=3VP04

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>