dyson airwrap Hair Styler User Manual
- June 3, 2024
- dyson
Table of Contents
Dyson airwrap Hair Styler
In the box
- Some attachments may not be included.
- You can buy additional attachments at www.dysoncanada.ca/en/your-Dyson
Getting started
Using your attachments
-
Connecting the attachment
Turn the attachment into the main body until it fits securely. -
Changing attachments
To change the attachment, pull down on the switch to release. -
Cool touch tip
During use, the Airwrap™ barrels, Round volumizing brush, and Coanda smoothing dryer will get hot. To change to another attachment, hold the tip. -
Take care when handling hot attachments
-
Hold the attachment only in the area indicated.
-
Some attachments may need occasional cleaning.
-
For more information, go to www.dysoncanada.ca/en/your-Dyson
Pre-styling
Coanda smoothing dryer Before curling, pre-dry the hair until almost dry. Comes with two modes (i) drying and (ii) smoothing. Use the cool tip to switch between the two modes.
Curling Barrels
- Step 1: Take a section of hair and bring the barrel towards the tips. Hair will start to wrap around the barrel.
- Step 2: Move the styler toward the head, no need to twist. Hold for 15 seconds or until dry.
- Step 3: Press the cold shot for 5-10 seconds to set the curl. Switch off to release. To change the curl direction, rotate the cool tip.
Shaping
Smoothing brushes
- Step 1: Rough-dry hair with Coanda smoothing dryer.
- Step 2: Use a Smoothing brush to brush from root to tip.
- Tips: For volume, the face bristles outwards. Turn the brush inwards at the ends to create a shape.
Smoothing
- Coanda smoothing dryer
- Rotate the cool tip to select Smoothing mode.
- Press against the hair to switch the airflow direction.
- Step 3: Use dry hair to hide flyaways. Position against hair until it attracts then slowly run down to tips. For use on dry and straight hair.
How to use the contact bar: Position the contact bar against the head until you hear a click and hair attracts. Run from root to tip to hide flyaways.
Regular filter maintenance
The filter must be cleaned when the white LED starts flashing. Ensure that you unplug your appliance from the mains electricity supply and allow to cool down before cleaning your filter. The Dyson Airwrap™ multi-styler has highly tuned technology to give outstanding performance. This technology needs to be kept free from dust and hair product residue. Maintenance is required to maintain performance.
- Step 1: Slide the filter cleaning brush over the cable and onto the filter cage. Using a rotating action, clean the filter cage thoroughly. Remove the filter cleaning brush.
- Step 2: Hold the handle of your appliance and pull the filter cage downwards, onto the cable. Gently pull open the filter cage and slide it off the cable.
- Step 3: Wash the filter cage under a warm, running tap.
- Step 4: Shake the filter cage to remove the majority of the excess water, then leave it to dry naturally.
- Step 5: Using a rotating and up-and-down action, clean the filter mesh with the filter cleaning brush until all the debris has been removed. Do not use water or chemicals to clean the filter mesh.
- Step 6: Gently pull the filter cage open and slide it onto the cable. Slide the filter cage towards the handle and twist until it snaps into place.
- SV12 JN.00000 PN.000000-00-00 00.00.00 VERSION NO.01
Documents / Resources
|
dyson airwrap Hair
Styler
[pdf] User Manual
airwrap Hair Styler, airwrap, Hair Styler
---|---