ET2 Contemporary Lighting E24221 Pierce LED Single Pendant Ceiling Light Instruction Manual
- June 9, 2024
- ET2 Contemporary Lighting
Table of Contents
ET2 Contemporary Lighting E24221 Pierce LED Single Pendant Ceiling Light
Before Getting Started
Read the instructions carefully prior to assembling the product.
When you open the package with a sharp tool like a cutter knife, be careful
not to damage the components inside.
Carefully remove all packaging materials and retain for future use.
Keep all hardware parts and packaging out of reach of small children.
Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product.
Ensure that you have all required contents for complete assembly Take care
when lifting. Assemble the product in close proximity to where you intend to
position the item.
Do not over tighten the screws and bolts as this may damage the threads.
Do not let children play with this product.
- Risk of suffocation! Keep any packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the
product.
Caution there is a risk of shock. Disconnect from power source before
assembling or cleaning
WARNING: Wires need to be connected to driver found in canopy and should
not be connected directly to power source or a short may occur.
Only use the recommended bulb type and do not exceed the maximum wattage as it
could cause fire.
Do not plug the product in if cord is torn or frayed.
Cleaning & Maintenance
On polished finishes, often using talc powder reduces the appearance of
fingerprints and other smudges
For respective shade surfaces, use the appropriate cleansers, i.e. glass
cleaner, acrylic polish, and wood polish.
Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.
Periodically (every 90 days) make sure that the screws are fully tightened.
Prolonged exposure to heat sources may cause glazing, melting and scorching,
or even cause color to fade.
PACKAGE CONTENTS
before Getting , Started , ensure the package contents the following components:
|
| ×1
---|---|---
| | ×1
| | ×3
| | ×3
| | ×2
| | ×1
| 
| ×1
CRITICAL INSTALLATION
This fixture must be installed with compatible dimmer types only.
Improper wiring of fixture end/or use of incorrect dimmer will cause
catastrophic fallure and viod the warranty.
Do not attempted to cut out factory connections without qualified Knowledge , Modifications made to this product without the consent of the manufacturer will warranty
FOR OPTIMAL USE
This fixture has seen tested to work with the below dimmers lutron diva DVCL0 153P
DVELV-300P
IMPORTANT
Make sure your dimmable LED fixture is Paired with the correct dimmer type.
Must be installed by a licensed electrician with Knowledge of electronic lighting systems.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>