jetec JPT-131 Pressure Transmitter Instruction Manual
- June 3, 2024
- JETEC
Table of Contents
jetec JPT-131 Pressure Transmitter Instruction Manual
Caution
The product produced through strict testing process. It also meets the specification as shown on catalog. Under normal and correct using circumstance, the product has a warranty for one year
The product cannot be used under below circumstances
- The outdoor environment
- High electromagnetic interference environment
- Humidity over 90% RH or temperature above 65°C environment
- Water environment
- High corrosion or polluted environment
Installation
- Please maintain balance for the pressure in the tube and atmosphere pressure.
- If install in outdoor environment, the device should provide a protection for over pressure.
- The power (V+) and output (OUT+) cannot be in wrong connection, it will lead to short circuit, and cause the damage to sensor output.
Dimensions
Please follow the below instruction for installation:
-
Set the product on pressure valve.
-
First, lock the transmitter by hand and make sure it sealed.
-
Open the pressure valve to balance the pressure inside.
-
Use wrench to seal the pressure connection and pressure valve.
-
Normal TEMP.
-
HIGH TEMP.
WIRING DIAGRAM
Support
JETEC ELECTRONICS CO., LTD.
Tel: 04-23729418
Fax: 04-23724011
Email: sales@jetec.com.tw
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>