Jetec TKF-12 Phase Sequence Tester Installation Guide
- June 13, 2024
- JETEC
Table of Contents
PHASE SEQUENCE TESTER
JTKF-12
PHASE SEQUENCE AND MOTOR ROTATION TESTER
JTKF-13
The unique TKF-12 & TKF-13 testers has been designed for checking triple phase power installations in the wide range of the phase-phase voltage between 100V to 690V in distribution network frequency range 10-70Hz. Our testers enables rotary field and motor rotation indication also with contact-less detection. TKF-13 provides quick indication of 3 phase rotation using test leads or can be used to determine motor rotation on 3 phase motors. TKF-12 is powered from tested network. TKF-13 is powered from 9V battery with AUTO-OFF function.
Standard accessories of the tester JTKF-12:
– pin probe with banana connector – black WASONBLOGB1
– pin probe with banana connector – red WASONREOGB1
– pin probe with banana connector – yellow WASONYEOGB1
– “crocodile” clip K01; black WAKROBL20K01
Optional accessories of the tester JTKF-12:
– AGT-16P (triple phase socket adapter) WAADAAGT16P
– AGT-32P (triple phase socket adapter) WAADAAGT32P
– AGT-63P (triple phase socket adapter) WAADAAGT63P
– carrying case S1
WAFUTS1
Standard accessories of the tester JTKF-13:
– test lead with banana plug; 1,2m; black WAPRZ1X2BLBB
– test lead with banana plug; 1,2m; red WAPRZ1X2REBB
– test lead with banana plug; 1,2m; yellow WAPRZ1X2YEBB
– pin probe with banana connector – black WASONBLOGB1
– pin probe with banana connector – red WASONREOGB1
– pin probe with banana connector – yellow WASONYEOGB1
– “crocodile” clip K01; black WAKROBL20K01
– alkaline battery 6LR61 (9V)
Optional accessories of the tester STKF-13:
– AGT-16P (triple phase socket adapter) WAADAAGT16P
– AGT-32P (triple phase socket adapter) WAADAAGT32P
– AGT-63P (triple phase socket adapter) WAADAAGT63P
– carrying case S1
WAFUTS1
JTKF-12
- Phase sequence indication (direction of field rotation) in the power network with rated phase-to-phase voltage (120…690V) AC by LED signalization.
- Operation in the power network with frequency range 10…70Hz.
- Indication of the voltage presence in the particular phases by neon lamps signalization.
- Power supply from the tested network (continuous operation to 15 minutes for max. voltage).
- Protection against faulty indication of field rotation.
Electric security:
– type of insulation double, according to EN 61010-1
– measurement category CAT III 600V acc. to EN 61010-1
– protection class acc. to EN 60529
IP42
Rated operational conditions:
– rated phase-to-phase voltage range 120…690V AC
– maximum operation phase-to-phase voltage 760V AC
– frequency range
10…70Hz
– operating temperature
-10…+45°C
– storage temperature
-20…+60°C
Other technical data:
– power supply from the tested electrical installation, up to 15
min for max. voltage
– dimensions 130 x 70
x 35mm
– weight (without test leads) approx.
200g
JTKF-13
-
Phase sequence indication (direction of field rotation) in the power network with rated phase-to-phase voltage (120…690V AC) by LED signalization.
-
Operation in the power network with frequency 2…70Hz.
-
Indication of the voltage presence in the particular phases by means of neon lamps.
-
Indication of direction of motor rotations:
– under state without voltage with using the test leads,
– remote, during motor operation. -
Detection of magnetic field presence.
-
AUTO-OFF function.
v.8
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>