Room Board Gardner Wall Sconce Instruction Manual
- October 30, 2023
- Room Board
Table of Contents
Room Board Gardner Wall Sconce
Product Information
The Gardner Light Fixture is a wall sconce that can be installed in any indoor location. The fixture comes with all the necessary hardware for installation, including a mounting plate, mounting plate screws, back plate screws, and wire nuts.
Recommended Tools
- Phillips head screwdriver
- Wire stripper/cutter
- Voltage tester
- Flat Head Screwdriver
Attention
If you do not have an existing electrical light box in your intended
installation site, have one installed by a licensed professional.
Product Usage Instructions
- Turn off the power to the circuit that the light fixture will be installed on.
- Attach the mounting plate to the junction box using the provided mounting plate screws.
- Using a wire stripper/cutter, strip approximately 1/2 inch of insulation from the wires in the junction box and from the wires on the sconce.
- Twist together the wires from the sconce with their corresponding wires from the junction box using the included wire nuts. Make sure that the connections are tight and secure. Tuck the excess wire into the junction box.
- Attach the sconce to the mounting plate using the provided back plate screws.
- Turn on the power to the circuit and test the light fixture using a voltage tester.
For any further assistance or questions regarding installation, please contact our customer support team at 800.486.6554 or visit our website at roomandboard.com.
GARDNER
This Product Includes
- A. Gardner Light Fixture
- B. Mounting Plate
- C. Mounting Plate Screws x2
- D. Back Plate Screws x2
- E. Wire Nuts
CAUTION
Cut power to the circuit before installation
- Attach the mounting plate to the junction box using provided mounting plate screws.
- Using the included wire nuts, twist together the wires from the sconce with their corresponding wires from the junction box. Tuck the excess wire into the junction box.
- Attach the sconce to the mounting plate using provided back plate screws.
- Return power to the circuit and turn on the light.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>