coolado tPump Model P Cordless High-Pressure Air Pump for Tires Instruction Manual
- June 6, 2024
- coolado
Table of Contents
INSTRUCTION MANUAL
trump MODEL P
CORDLESS HIGH-PRESSURE AIR PUMP FOR TIRES
Please be sure to read this manual carefully before use
PRODUCT SPECIFICATION
Please read this instruction carefully before using this product for the first
time.
It will guide you to use it correctly and remind you of the relevant
precautions.
This pump is a professional tool and not a toy.
This product is a portable smart air pump, suitable for the inflation of
bicycle tires, balls, motorcycle tires, and other high-pressure inflatables.
The product and tube will get hot after long use (>10 min) After long use,
please allow the pump to cool down for at least 10 minutes before proceeding.
Keep away from children.
PRODUCT DESCRIPTION
- LED flashlight
- LED Charging indicator light
- LED flashlight on/off button
- Power on/off button
- Pump hose screw opening
- Micro USB port
ACCESSORIES LIST
CHARGING
Please charge the battery before using the product for the first time. Use the
charging cable to connect to a 5V 2A charger (not included). The battery
indicator will light when harging:
Red light: charging
Greenlight: fully charged
USE OF DIFFERENT ADAPTERS
SCHRADER VALVE
The tube is standard equipped with a Schrader valve suitable for
– Mountain bikes
– Electric bikes,
– Motorcycles
– Cars. just connect it directly.
PRESTA VALVE
Connect the Presta adapter first to the tube of the pump, then connect the tube
to the Presta valve suitable for:
– Road bikes
– Individual mountain bikes
BALL NEEDLE
Connect the ball needle adapter to the tube of the pump, moisture the needle a
little and plug it into the valve of the ball. Suitable for
– basketball,
– football
– other kinds of balls.
INFLATING
START INFLATION
- Screw one end of the air tube into the screw opening, thescrew the other end into the tire valve (note: for the Presvalve, please install the Presta valve adapter at first).
- Press the power switch to start the inflating.
- Press the power switch to stop the inflation.
START LIGHT FUNCTION
Press the light button to switch the light on. Press again to switch the light off.
BATTERY AND BATTERY LIFE
- Fully charged at 25°C ambient temperature, the continuous working time is about 30 minutes,
- Higher pressures or lower ambient temperatures will reduce the battery working time.
SPECIAL NOTES
- The inflation pressure of items such as balloons, toy balls, swimming rings, and other products is lower than the range of this air pump, and the inflation cannot be automatically stopped by the preset pressure. The Colorado ePump is a better choice for these items
- Before inflating, please confirm the air pressure value required to avoid injury caused by over-inflation bursting.
- Please avoid putting it in a high-temperature environment such as a car that can be exposed to direct sunlight;
- Do not bend or step on the inflation tube during inflation to keep the air flow smooth.
- Stay near the pump when the air pump is working and make sure the air pump is not over-pressurizing.
- Protect the pump against moisture, heavy falls, water immersion, and mud or sand intrusion;
- There is a DC motor in the air pump, which may generate electric sparks during operation. So do not put it near flammable liquids or gases when in use.
- This product is a professional tool and not a toy, keep away from children; keep a safe distance from children when inflating objects;
PRODUCT PARAMETERS
Inflatable pressure range | 0.210.3 bar/3150 psi |
---|---|
Product size | 032x230mm (metal size without hose ) |
Working temperature | Charging: 0°C–45°C Discharging: -10°C–45°C |
Storage temperature | -10°C–45°C |
Trachea size | 175±5mm, including air nozzle |
Battery capacity | 2.600 mAh |
Working noise | 1 meter away, the noise is less than 75dB |
Input current | Sv 2A |
Charging interface | micro-USB |
Charging time
.
| less than 4 hours
,
Common unit conversion: 1 bar= 14.5psi, 1 bar= 100kPa.
TROUBLESHOOTING
MALFUNCTION | SOLUTION |
---|---|
Slow inflation |
- Check whether the battery is sufficiently charged
- Check if the air hose is leaking
- Check if the connection parts on both ends of the air tube are tight
Air leakage when connecting the tube| Tighten the tube
CLEANING & MAINTENANCE
- The Colorado trump P needs only to be cleaned on the outside surface with a dry, soft cloth.
- The product has a built-in non-removable lithium battery. Please do not throw the product into fire or discard it carelessly. The lithium battery may cause fire, spontaneous combustion, or explosion due to overheating, impact, and water ingress.
- The storage temperature of the product should not be lower than -10 ° C or higher than 45 ° C. Excessive heat or cold will shorten the product’s lifetime and damage the built-in battery. The battery may be damaged if not used for a long time. It is recommended to charge the pump at least once every three months.
WARRANTY
- The Colorado warranty is in accordance with the EU law and regulations 14 days money-back guarantee from purchasing date. The pump must be returned to its original undamaged package. (See return policy on our website)
- Colorado provides a one-year warranty for failures caused by normal operation according to the manual. Improper use of the product and man-made damage is not covered by the warranty.
- To replace the product; it needs to be packaged completely.
- The warranty is limited to the value of the pump.
- Damages to the Collado trump caused by, but not limited to: abuse, abnormal operation, water damage, non-advised power supply, high temperatures, motor burn caused by the high-voltage power supply, All man-made damage. Self-disassembly accidental damage, damages caused by force majeure are not covered by the warranty.
- The liability of Collado will ALWAYS be limited to the value of the pump.
- Colorado will not be liable for damages to persons and/or property.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>