coolado tPump P Cordless High Pressure Air Pump For Tires Instruction Manual

coolado tPump P Cordless High Pressure Air Pump For Tires

Please be sure to read this manual carefully before use

PRODUCT SPECIFICATION

Please read this instruction carefully before using this product for the first time. It will guide you to use it correctly and remind you of the relevant precautions.
This pump is a professional tool and not a toy.
This product is a portable smart air pump, suitable for the inflation of bicycle tires, balls, motorcycle tires and other high-pressure inflatables.
The product and tube will get hot after long use (>10 min) After long use please allow the pump to cool down for at least 10 minutes before proceeding.
Keep away from children.

CHARGING

• Please charge the battery before using the product for the first time.
• Use the charging cable to connect to a 5V 2A charger (not included).
• Battery indicator will light when charging:
  • Red light: charging
  • Green light: fully charged

PRODUCT DESCRIPTION

ACCESSORIES LIST

1. Presta valve adaptor
2. Plastic nozzle adaptor
3. Ball needle adaptor
4. Tube with schrader valve
5. Type-C charging cable

USE OF DIFFERENT ADAPTERS

SCHRADER VALVE

The tube is standard equipped with a Schrader valve suitable for

• Mountain bikes
• Electric bikes,
• Motorcycles
• Cars,
  just connect it directly.

PRESTA VALVE

Connect the Presta adapter first to the tube of the pump, then connect the tube to the Presta valve suitable for:

• Road bikes
• Individual mountain bikes

BALL NEEDLE

Connect first the ball needle adapter to the tube of the pump, moisture the needle a little and plug it into the valve of the ball. Suitable for

• basketball,
• football
• other kinds of balls.

INFLATING

START INFLATION

1. Screw one end of the air tube into the screw opening, then screw the other end into the tire valve (note: for the Presta valve,please install the Presta valve adapter at first).
2. Press the power switch to start the inflating.
3. Press the power switch to stop the inflation.

START LIGHT FUNCTION
Press the light button to switch the light on. Press again to switch the light off.

BATTERY AND BATTERY LIFE

• Fully charged at 25°C ambient temperature, the continuous working time is about 30 minutes,
• Higher pressures or lower ambient temperatures will reduce the battery working time.

CHOOSE THE RIGHT AIR PRESSURE

In order to ensure safety, before using the product to inflate, please inquire about the air pressure value required by the inflated item by reading the instructions or other ways to avoid accidents caused by low-pressure or over- pressure.

Suitable air pressure value for common products

Product

category

| Product type| Recommended

pressure range

---|---|---
Bicycle| 12, 14, 16-inch bicycle tire

20, 22, 24-inch bicycle tire

26, 27.5, 29 inch bicycle tire

| 30-50psi  2,0-3,5 bar

40-50psi  2,7-3,5 bar

45-65psi  3,0-4,5 bar

Motorcycle| Motorcycle tire| 25-45psi 1.8-3.0 bar
Car| Small car tire| 35-40psi 2.2-2.8 bar
Ball| Basketball Football Volleyball

Rugby

| 7-9psi     0,5-0,6 bar

8-16psi   0,5-1,1 bar

4-5psi     0,3-0,4 bar

12-14psi 0,8-1,0 bar

SPECIAL NOTES

• The inflation pressure of items such as balloons, toy balls, swimming rings and other products is lower than the range of this air pump, and the inflation cannot be automatically stopped by the preset pressure. The Coolado ePump is a better choice for these items
• Before inflating, please confirm the air pressure value required to avoid injury caused by over-inflation
• Please avoid putting it in a high temperature environment such as a car that can be exposed to direct sunlight;
• Do not bend or step on the inflation tube during inflation to keep the air flow smooth.
• Stay near the pump when the air pump is working and make sure the air pump is not over-pressurizing.
• Protect the pump against moisture, heavy falls, water immersion and mud or sand intrusion;
• There is a DC motor in the air pump, which may generate electric sparks during operation. So do not put il near flammable liquids or gases when in
• This product is a professional tool and not a toy, keep away from children; keep a safe distance from children when inflating objects;
• Before setting the inflation pressure value, please make sure that you have selected the correct measurement unit, it may lead to high air pressure danger.

PRODUCT PARAMETERS

Discharging: -10°C~45°C

Storage temperature| -10°C~45°C
Trachea size| 175±5mm , including air nozzle
Battery capacity| 2.600 mAh
Working noise| 1 meter away, the noise is less than 75dB
Input current| 5v 2A
Charging interface| micro -USB
Charging time| less than 4 hours

Common unit conversion: 1 bar= 14.5psi, 1 bar= 100kPa.

TROUBLESHOOTING

2.  Check if the air hose is leaking

3.  Check if the connection parts on both ends of the air tube are

tight

The air pump has shut down

automatically after screwing the valve adapter

| Press the Start/stop button to turn on the pump again
Air leakage when connecting the tube| Tighten the tube

CLEANING & MAINTENANCE

• The Coolado needs only to be cleaned on the outside surface with a dry, soft cloth.
• The product has a built-in non-removable lithium battery. Please do not throw the product into fire or discard il The lithium battery may cause fire, spontaneous combustion or explosion due to overheating, impact and water ingress.
• The storage temperature of the product should not be lower than -10 ° C or higher than 45 ° C. Excessive heat or cold will shorten the product’s lifetime and damage the built-in
• The battery may be damaged if not used for a long It is recommended to charge the pump at least once every three months.

WARRANTY

• The Coolado warranty is in accordance with the EU law and regulations
• 30 days money back guarantee from purchasing date. The pump must be returned to its original undamaged (See return policy on our website)
• Coolado provides a one-year warranty for failures caused by normal operation according to the manual. Improper use of the product and man-made damage are not covered by the
• To replace the product; it needs to be packaged
• The warranty is limited to the value of the
• Damages to the Coolado trump caused by, but not limited to: abuse, abnormal operation, water damage, non-advised power supply, high temperatures, motor burn caused by the high-voltage power supply, All man-made damage. Self-disassembly and accidental damage, damages caused by force majeure are not covered by the
• The liability of Coolado will ALWAYS be limited to the value of the pump.
• Coolado will not be liable for damages to persons and/or

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>