Aqara C1 Smart Pet Feeder User Manual

Aqara C1 Smart Pet Feeder User Manual

Product Description

With the Aqara Smart Pet Feeder C1 equipped with Zigbee wireless communication protocol, you can feed your pet at scheduled times and portions by our app no matter where you are.

• An Aqara Zigbee 3.0 hub is required. Some functions require support of specific hubs. For more details, please see: www.aqara.com/support

Warnings

1. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
2. Children shall not play with the appliance.
3. Cleaning and user maintenance shall not be made by children without supervision.
4. It must only be supplied at safety extra low voltage corresponding to the marking on the appliance.

What’s in the Box

• Smart Pet Feeder
• C1 × 1,
• USB Cable × 1,
• Stainless Steel Bowl × 1,
• Plastic Bowl × 1,
• Desiccant × 1

Preparation Before Use

1. A smart phone or a tablet (with iOS or Android system) that can be connected to Wi-Fi or cellular network.

2. An Aqara hub that supports Zigbee 3.0.

3. 5V1A USB-A power supply such as a wall outlet or charging adapter.

4. Scan the QR code to download the Aqara Home app.
   Scan Me
   

5. Take the desiccant out of the plastic bag and put it into the desiccator slot in the lid.

6. Pour the dry pet food into the food bucket.

Note:

1. Particle diameter of dry pet food should be limited within 2-12mm.
2. This product is designed for pet cats and small and medium-sized dogs aged three months and older.
3. The smart pet feeder can only store dry food. It cannot store wet food or mixing wet and dry food.
4. It is recommended to place the feeder against the wall and away from tables, chairs and other furniture to reduce the risk of the feeder being knocked over by the pet.

Device Binding & Initialization

1. This product requires an Aqara Zigbee 3.0 hub. Please add the hub to the app according to the corresponding manual.
2. Click “+” in the upper right corner of the home page in the app to enter the “Add Accessory” page. Select “Smart Pet Feeder C1” and the hub to be connected, and follow the instructions on the app.
   Hold the reset button for 5 seconds, and then the hub will be connected.

Device Setting

Click the “…” in the upper right corner in the home page of the device to adjust the settings of the feeding plan, child lock, etc.

Power Supply

1. Please use the adapter to supply power to the feeder under normal circumstances.
2. The Smart Pet Feeder C1 can also work with dry batteries. Please open the battery cover at the bottom and put in batteries. In case of any power failure, the batteries can ensure the power supply.
3. Dry batteries need to be purchased separately. Three D batteries (LR20 alkaline batteries) are required.
4. When the device is powered by dry batteries, the indicator light will stay o# to save energy, but other functions still work as usual.

Note:

1. Different types of batteries or new and used batteries are not to be mixed.
2. Insert batteries in the correct polarity as indicated in the battery compartment.
3. Non-rechargeable batteries are not to be recharged.
4. Waste batteries should be recycled in line with the local laws and regulations. Do not dispose of them at will to avoid pollution.
5. If the appliance is to be stored unused for a long period, the batteries should be removed.
6. The supply terminals are not to be short-circuited.
7. Exhausted batteries are to be removed from the appliance and safely disposed of.

Food Bucket Cleaning

Press the clips on both sides of the food bucket, and you can take it out to clean.
Note: please do not rinse the lower part of the device to avoid any device failure.

Button Operations

once. The number of portions can be set in the app.
Note: one portion weighs about 6-10g, which varies with the size of the food particles. Please set the number of portions for every feeding according to your pets’ habits and the actual weight of one portion.
Voice recording| Press and hold the voice record button, and recording will start after a “beep” sound. Press and hold the button until you finish the recording, and then you will hear “beep, beep” to mark the completion of recording.
Check the binding state| Click the reset button. If the indicator light flashes in blue three times, the device is connected to the network.
If the indicator light turns red for about 1 second, the device is not connected to the network.
The device is restored to factory settings & configures network| Press and hold the reset button for 5 seconds until the indicator light turns blue and flashes continuously:
The device is restored to factory settings and is configuring network.

The configuration status will   last for 30 seconds, and in this period:

• If the user completes network configura­tion for the device successfully via the Aqara Home app, the indicator will stop flashing.
• If the configuration fails, the red indicator will flash shortly and then stop.
• If there are no other operations,  the indicator will be off after 30 seconds and network access will end.

Product Specifications

Aqara Smart Pet Feeder C1

• Color: White
• Model Number: PETC1-M01 (PET – Products for pets, C-Care series, M01 – First motorized product)
• Dimensions: 193×193×312 mm
• Rated Current: 1A
• Rated Voltage: 5V
• Operating Temperature: -10~45℃ (14°F ~ 113°F)
• Operating Humidity: 0-95% RH, without condensation
• IC: 22635- PETC1M01
• Wireless Protocol: Zigbee IEEE 802.15.4 (acts as a router/repeater)
• FCC ID: 2AKIT-PETC1M01

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment o# and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Federal Communications Commission (FCC) compliance statement:

1. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
2. This device may not cause harmful interference, and
3. This device must accept any interference received, including interference that may cause undesired operation.
4. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC NOTICE TO CANADIAN USERS

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES‐003.
This device complies with RSS‐247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Zigbee Warnings

Zigbee Operation Frequency: 2405-2480 MHz
Zigbee Maximum Output Power: ≤ 13 dBm
Under normal use of condition, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user.

RF Exposure statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

EU Declaration of Conformity

Hereby, Lumi United Technology Co., Ltd. declares that the radio equipment type Smart Pet Feeder C1, PETC1-M01, is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following
internet address: http://www.aqara.com/DoC/

WEEE Disposal and Recycling Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU)
which should not be mixed with unsorted household waste.
Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities.
Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

Customer Support

Online Customer Service: www.aqara.com/support
Customer Support Email: support@aqara.com
Website: www.aqara.com
Manufacturer: Lumi United Technology Co., Ltd.
Address: Room 801-804, Building 1, Chongwen Park, Nanshan iPark,
No. 3370, Liuxian Avenue, Fuguang Community, Taoyuan Residential
District, Nanshan District, Shenzhen, China
Made in China

References

• Aqara - Smart Home Automation Devices for Better Living
• Aqara Smart Device Product Support
• Тех. поддержка | Aqara

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>