ANKER C5 Magnetic Wireless Power Bank User Manual

June 3, 2024
Anker

C5 Magnetic Wireless Power Bank

ANKER C5 Magnetic Wireless Power Bank

ANKER C5 Magnetic Wireless Power Bank

Package

  • Magnetic wireless power bank *1
  • Type-C cable *1
  • User Manual

Functional component

ANKER C5 Magnetic Wireless Power Bank Overview

Wireless Charging

  1. This product realizes short-distance wireless power transmission through electromagnetic induction, and all receivers of the Qi standard can use this product for charging; inductive wireless charger. Supports fast charge 15W (compatible with 10W 7.5W 5W), and has C port input and output function.
  2. Single-click to open wireless charging /double-click to close wireless charging.
  3. C port output 15 W.
  4. When the C port input and the wireless charging output work at the same time; the power is powered by 5V at the same time

Circuit Protection

  1. Input under-voltage protection: when voltage value is lower than 4.5V, the product will not work (without cable)
  2. Input over-voltage protection: the product will not work when the input voltage exceeds 13.5V (without cable)
  3. FOD foreign object detection: use 25mm diameter metal, after detecting foreign object The green light flashes and turns off after 5 seconds.

Specification

  • Material: ABS+PC
  • Product Size: 64.79814mm
  • Input voltage: 5V/2A, 9V/2A, QC ,PD
  • Wireless charging output power: 5W, 7.5W, 10W, 15W
  • Coil: ∅50mm*2.0mm
  • Working temperature: -10℃ ~ +45℃
  • Compatibility: All devices with wireless receivers or Qi supported devices.

When the C port input and the wireless charging output work at the same time; the power is powered by 5V at the same time

Notice

  1. Do not squeeze or bump the device excessively.
  2. Do not use the wireless charger in severe high temperature, humidity or corrosive environment, avoid damaging the circuit of the device.
  3. Do not place it with magnetic cards with magnetic strips or chips (ID cards, bank cards, etc.) Too close to avoid the failure of the magnetic card

Warranty

The three guarantee period of this product: from the date of purchase (sent by the returned customer receipt or purchase machineSubject to the ticket date), provide 12-month warranty service, and other accessories (such as packaging, etc.)It is not within the scope of three guarantees. The appearance of the product is artificially damaged, and the loss of accessories is not within the scope of three guarantees scope. For products that are not within the three guarantees or exceed the three guarantees period, customers still enjoy maintenance services, but the maintenance cost shall be paid.

For your rights and interests, please fill in carefully and keep it properly as a pre maintenance voucher!
Do not modify the content without authorization, otherwise it will be deemed invalid.
The company reserves the final right to interpret the after-sales service regulations of the product.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals