BRESSER BR-10RGB LED Light Tube with Built-in Rechargeable Battery Instruction Manual
- June 3, 2024
- BRESSER
Table of Contents
LED Light Tube with Built-in Rechargeable Battery
Instruction Manual
INSTRUCTION MANUAL
Visit our website via the following QR Code or web link to find further information on this product or the available translations of these instructions.
PARTS LIST & DELIVERY CONTENT
GENERAL WARNINGS
DANGER OF BODILY INJURY!
Do not use in the presence of children or animals. Store out of reach of
children and animals.
Never touch parts of the device during operation or before it has cooled down
completely (approx. 45 min. after switching off)!
RISK OF GLARE!
Make sure that people and animals do not look into the light. The high
luminosity can cause glare to the eyes and afterimages. This impairment of
vision can lead to accidents.
RISK OF MATERIAL DAMAGE!
Make sure that no one can trip over connection cables of the device.
The device could be knocked over.
The manufacturer accepts no liability for damage to property caused by
improper or insufficiently safe installation!
Only use the recommended power supply unit or the recommended rechargeable
batteries 4 for the power supply! he manufacturer accepts no liability for
voltage damage aused by the use of an unsuitable power adapter!
DANGER OF AN ELECTRIC SHOCK!
This device contains electronic parts that are powered by a power source
(power adapter). Only use the device as described in the manual. Otherwise,
you run the DANGER of an ELECTRIC SHOCK. Never bend, squeeze or pull power
cables, connecting cables, extensions or connectors. Protect cables from sharp
edges and heat. Check this device, cables and connections for damage before
use.
Never attempt to operate a damaged device, or a device with damaged electrical
parts! Damaged parts must be replaced immediately by an authorized service
agent. Operate the device only in a completely dry environment and do not
touch the device with wet or damp body parts.
FIRE/EXPLOSION HAZARD!
Always place the device in such a way that it cannot tip over and ensure that
it is stored in a reasonably safe place.
- Keep children and animals away from the device! They could knock the device over.
- Make sure that no one can trip over connection cables. The device could be knocked over.
- Do not expose the device to high temperatures. Do not short-circuit the device or dispose of in fire! Excessive heat and improper handling can cause short circuits, fires and even explosions!
- Never cover the ventilation slots or cooling fins of the device during operation or until it has cooled down completely!
- Only use the recommended power supply unit or batteries 4 !
! IMPORTANT NOTE!
Do not disassemble the device! In the event of a defect, please contact your
dealer. They will contact the Service Center and can arrange the return of
this device for repair if necessary.
Disconnect the power supply by pulling the mains plug when the appliance is
not in use, in case of a longer interruption of operation and before any
maintenance and cleaning work.
Place your device so that it can be disconnected from the power supply at any
time. The power outlet should always be near your appliance and should be
easily accessible, as the plug of the power cord serves as a disconnect device
from the mains supply. To disconnect the unit from the mains, always pull the
mains plug and never pull the cable! Do not subject the device to excessive
vibrations.
1.1 PARTS LIST (Fig. 1-3)
- Function indicator.
- UP button .
- Power/Function button
- DOWN button
- Battery charging port
1.2 DELIVERY CONTENT (Fig. 1-3)
LED Light tube with built-in rechargeable battery (1x), power adapter with
cable (1x), remote control (1x), instruction manual (1x)
POWER SUPPLY
NOTE: This device is powered by the built-in rechargeable battery. Before
commissioning, make sure that it is fully loaded. Only use the mains adapter
supplied for charging!
Press Power/Function button to power on the device.
3 SPECIAL LIGHTING EFFECTS MODE
Hold the Function button for 3 seconds when the light is on, to enter the
mode of programmed special lighting effects. Hold the Function button for
another 3 seconds to enter the mode of color temperature and RGB.
Note: Please make sure that you hold the Function button enough for 3
seconds while switching the modes between special lighting effect and color
adjustment (RGB color selection), otherwise the light will be turned off. In
the mode of special lighting effect, shortly press Function button to switch
among different lighting options from F1 to F10.
F1: Thunder flash
F2: Fireworks
F3: Candle
F4: TV
F5: Bad bulb
F6: Paparazzi
F7:SOS
F8: Police car
F9: Ambulance
F10:Flicker
UP / DOWN button to increase or decrease the brightness.
EXTERNAL POWER SUPPLY
Use the original power adapter to extend the work time.
INFRARED CONTROL
Control the power switch, dimmer, color temperature, color selection and
special lighting effects through the infrared remote control.
OPERATING AND USING THE DEVICE
- Powering on or off the light tube.
- Hold the Power button for 1 second and release it to switch on or off the device.
ADJUSTING THE BRIGHTNESS
Press Up or Down button to increase or decrease the brightness.
ADJUSTING THE COLOR TEMPERATURE AND SELECTING RGB COLORS
Shortly press the Function button by 9 steps to choose the color temperature
from 3000K, 4500K, 6000K and 6 different colors when the light is on.
MAGNETIC ATTACHMENT
The light tube comes with magnetic parts which are used to be attached on
somewhere on metal surface.
DISPOSAL
Dispose of the packaging materials by type. Contact your local waste-disposal
service or environmental authority for information on the proper disposal.
Do not dispose of electronic devices in the household garbage! According to
the European Directive 2002/96/EU on Waste Electrical and Electronic Equipment
and its ransposition into national law, used electrical equipment must be
collected separatelyand recycled in an environmentally sound manner.
Observe the current legal regulations when disposing of the device!
Information on proper disposal can be obtained from municipal waste disposal
service providers or the nvironmental Agency.
CLEANING
Before cleaning the device, disconnect it from the power supply (remove plug
or remove batteries)!
Only use a dry cloth to clean the exterior of the device. To avoid damaging
theelectronics, do not use any cleaning fluid.
Protect the device from dust and moisture. Store it in the suppliedbag or
transportation packaging. The batteries should be removed from the unit if it
has not been used for a ong time.
EC DECLARATION OF CONFORMITY
A “Declaration of conformity” in accordance with the applicable directives
and corresponding standards has been prepared by Bresser GmbH. This can be
viewed at an ime pon request at
www.bresser.de/download/F004547/CE/F004547_CE.pdf
UKCA DECLARATION OF CONFORMITY
A “Declaration of conformity” in accordance with the applicable directives and
corresponding standards has been prepared by Bresser GmbH. This can be viewed
at anyb ime upon request at
www.bresser.de/download/F004547/UKCA/F004547_UKCA.pdf
TECHNICAL DATA
| Model | 10RGB |
|---|---|
| Art. No. | F004547 |
| Type | LED light tube |
| LED illuminant | 0.2 Watts High Bright SMD LEDs 50 pcs each for |
warm/daylight/RGB
Max. Power| 10W 2
Luminous flux| 1200LM
Colour temperature| 3000 – 6000K
Light dimming| 10% to 100%
Power supply| DC5V2A via power adapter 4 (to load built-in rechargeable
battery)
Battery type| 2200mAh Li-Ion, built-in
Dimensions| 32x500mm
- The LEDs have a long lifetime and are not replaceable due to technical reasons.
- The power of an LED lighting is higher than that of conventional halogen lights. Therefore,
- LED’s have a lower wattage than comparable lights.
- Not included in the scope of delivery / Only use recommended accessories!
GUARANTEE
The regular warranty period is 5 years and begins on the day of purchase. You
can consult the full guarantee terms as well as information on extending the
guarantee period and details of our services at
www.bresser.de/warranty_terms.
Service
Please contact the service centre first for any questions regarding the
product or claims, preferably by e-mail.
e-mail: service@bresseruk.com
Telephone*: +44 1342 837 098
BRESSER UK Ltd
Customer Support
Suite G3, Eden House
Enterprise Way
Edenbridge, Kent TN8 6HF
United Kingdom
- Number charged at local rates in the UK (the amount you will becharged per phone call will depend on the tariff of your phoneprovider); calls from abroad will involve higher costs.
Contact
BRESSER Benelux B.V.
Smirnoffstraat 8
7903 AX Hoogeveen · Nederland
@BresserEurope
Errors and technical changes reserved.
Manual_F004547_BR-10RGB_en-nl-de_BRESSER_v062021a
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>