selectronic PC0018 SP Pro Series Grid Power System User Manual
- June 3, 2024
- selectronic
Table of Contents
PC0018 SP Pro Series Grid Power System
User Manual
PC0018 SP Pro Series Grid Power System
SP PRO Warranty Conditions for Australia and New Zealand
| Warranty Requirements | Warranty Duration from date of Purchase |
|---|---|
| 1. Standard warranty | 5 years |
2. The 5P PRO is in its original installation and you meet all the conditions of the Selectronic Power Assist program.| 10 years
Our goods come with guarantees that cannot be excluded under consumer law
within your country. You are entitled to a replacement or refund for a major
failure and compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not amount to a major
failure.
Failure to adhere to all installation and user conditions as set down in the
installation manuals will void your warranty. Any faults or associated faults
caused by lightning, water or moisture ingress, vermin infestation, improper
voltage, faulty installation, use of the product in a manner for which it is
not intended, alterations which affect the reliability or performance of the
unit but are not attributable to faulty manufacture, failure to act on service
warning from the SP PRO inverter, damage caused by faulty generator sets, or
caused by other system components, will not be covered under warranty. The
wear of consumable components (cooling fans and power capacitors reaching end
of life) is not covered under warranty.
The standard warranty for this product is 5 years from date of purchase. For
installations in Australia and New Zealand, it is possible to extend the
warranty term up to 10 years. To achieve a 10-year warranty plus other
additional benefits, please see details on our Selectronic Power Assist
program at
www.selectronic.com.au/powerassistSelectronic
will bear the cost of parts and their factory labour to repair any
manufacturing fault found within the terms and period of this warranty. For
claim under warranty, faulty product must be returned to Selectronic in
Melbourne, Australia. unless special arrangements have been made between
Selectronic and the Installer.
Selectronic will pay the cost of freight to return the repaired inverter
within mainland Australia or New Zealand only. The method of freight will be
determined by electronic.
Selectronic will not be responsible for any misrepresentations or incorrect
information conveyed by anyone not directly employed by Selectronic.
www.selectronic.com.au/warranty Scan
this QR code to visit the website:
http://www.selectronic.com.au/warranty/
Warranty conditions apply to inverters purchased on or after 1st July 2021. Warranty conditions remain current until the next revision of this document is published. Proof of purchase is required when making a warranty claim.
Grid Independence
Outstanding Reliability
Ultimate Flexibility
+61 3 9727 6600
www.selectronic.com.au
facebook.com’SelectronicAustralia
P000111 REV 13004230 01/07/2021
Documents / Resources
|
selectronic PC0018 SP Pro Series Grid Power
System
[pdf] User Manual
PC0018 SP Pro Series Grid Power System, PC0018, SP Pro Series Grid Power
System, Grid Power System, Power System
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>